How VISTA and XP are connected to the network

You can create an ADSL broadband connection for your Windows Vista computer by following these steps:

1. Start Network Control Panel Network and Sharing Center Set up connection or network Connect to Internet broadband pppoe Enter password, connection name Connection;

2. Create a shortcut: Network and Sharing Center Manage network connections Find a broadband connection, right-click and select Create shortcut.

To connect to the network on a Windows XP system, you can follow these steps:

First, make sure your computer is connected to a network device (such as a router or network card).

Open the Control Panel.

In the Control Panel, find Network Connections and open it.

In the Network Connections window, click Create a new connection.

In the New Connection Wizard, select Connect to the Internet, and then click Next.

In the next window, select "Receive Internet Joke via Network Dialing" and click Next.

In the next window, enter your username and password (if you have one), and then click Done.

If you want to connect to a wireless network, you'll need to make sure your computer supports a wireless card and then follow the steps above.

Hello! We're glad to answer your questions! <>

The method of connecting the XP system to the network is as follows:1Make sure your PC is connected to a network, such as a router via an Ethernet cable or a Wi-Fi connection.

2.Find the network icon on the taskbar on your desktop, which usually appears as a wireless signal icon or an Ethernet connection icon. 3.

Click on the network icon and a list of network connections will pop up. 4.If you want to connect to a Wi-Fi, select the name of the Wi-Fi network you want to connect to and click on it"Connections"Button.

If you're connecting to a wired network, select an Ethernet connection. 5.If you're connected to a Wi-Fi network, you'll see a dialog box asking for your network password.

Once you have entered the correct password, tap on it"Even the disadvantages are detected"Button. 6.If all goes well, the system will show that the connection is successful, and the network rental canmato icon will show the connected status.

The role of the hub or switch is [

1) Each twisted pair interface is only connected to one workstation (network card), and the signal is transmitted point-to-point.

2) When a signal is received by a port, the hub reshapes and broadcasts it to every other port.

3) The hub itself can automatically detect the collision of the signal, and immediately send a jam signal to notify other ports when the collision occurs.

4) When the transmission line or network card of a certain port fails, the hub automatically isolates the port so that it does not affect the normal operation of other ports, because the current 100MB switch is very cheap, so the 100Mbps network card and 100M switch are generally selected.

The components required for the LAN are all in place, and now based on the most stable personal operating system at present, Windows 2000 Professional, I will follow me step by step to build a LAN café.

Turn off the firewall first.

Secondly. XP settings.

1. Turn off third-party firewall software (such as Rising, Micropoint, etc.), or you can directly modify the firewall rules;

2. Enter "[url]" in the "Run" column to enter "Group Policy", find "Computer Configuration" - "Windows Configuration" - "Security Settings" - "Local Policy", select "Classic: Authenticate local users without changing their original identity" in "Network Access: Sharing and Security Mode of Local Accounts" in "Security Options", and disable "Account; Local accounts with blank passwords are only allowed to log in to the console";

3. Go to "Control Panel" - "Network Connection" - "Local Connection", right-click "Properties", and check "File and Printer Sharing on Microsoft Network"; Install the NetBIOS protocol: "Install" - "Protocol" - "Add", you can see the NetBIOS protocol and install it;

4. Now you can start sharing any of your folders: right-click on any folder - "Properties" - "Share" - "Share this file", and add access rights to the XP account (your own account) in "Permissions", otherwise you will be prompted to enter the username and password when you log in to Vista, even if you enter the correct or no password is set, it will prompt you to enter the wrong one.

Vista Settings:

1. Step 1 and 2 of the same XP setting;

2. In "Control Panel" (system default view, non-classic) - "Set File Sharing", enable "Network Discovery" and "File Sharing", open "Manage Network Connections" - "Local Connections" on the left, right-click "Properties", and check "File and Printer Sharing for Microsoft Network";

3. Same as above, step 4;

4. Select "View Computers and Devices" in "Set up file sharing" to see the shared files;

5. Okay, done.