How about Mitsubishi forklifts? What are the types and performance of Mitsubishi forklifts?

Mitsubishi forklift performance is stable, at present, large ceramic factories are using Mitsubishi forklifts, daily maintenance is done, basically no maintenance, want to know more about Mitsubishi forklifts can call 0769-23102690Trust us to answer your satisfaction.

Of course, the quality of imports is good If you drive yourself, don't be careful, it's easy to break, if you ask someone to drive, it's not necessarily, I see that some of the heli forklifts used by our storage companies here have been overhauled in half a year, not that the quality of Heli is too poor, but the driver is too fierce.

For example, in Isuzu's trucks, important parts such as engines, starters, gears, clutches, and brake cylinders rarely break, so there is no need to worry about high maintenance costs. It's hard to say about the domestic ones.

There are also great benefits to buying domestic products, and you can sell them in two or three years and get new ones.

Mitsubishi forklift is good in the imported car is still relatively good If the amount is small, you can choose Hang fork Hang fork heard that the introduction of Nissan is in the OEM French Manito is also OEM The quality of the car should be good Compared with many domestic cars.

The maintenance cost is too high, the cost of the car is high, depending on your dosage, if the amount is small, you can choose the domestic assembly of Tailifu, and if it is large, you can choose the original Tailifu Taiwan, which is close to the domestic assembly of Mitsubishi.

Forklift or choose Heli The quality of Heli is the most stable in China, and the cost performance is also high.

Mitsubishi forklift's ** support for the selection of after-sales maintenance Shengyang.

Guangzhou Marusheng Construction Machinery Equipment **** is a professional sales of Mitsubishi forklifts.

Let me say two words (diesel forklifts as an example):

1.What brand of forklift is better.

If you only choose domestic internal combustion forklifts, I suggest that Heli and Hangzhou forklifts choose one each. If what model of forklift is better for these two brands, I suggest: Heli H2000 with imported engine Hangzhou R30 Nissan technology.

2.What kind of car is right for you.

Choosing a forklift is not only about choosing a brand, but also about choosing the overall service quality of pre-sale, in-sale and after-sales service attached to this forklift. You need to find a partner close to you, and don't travel far to buy a brand elsewhere.

There will always be problems with machinery and equipment, and hundreds of millions of projects will have strikes, not to mention a forklift. Service is key. Reassuring service is preferred.

3.Are there no merits for other brands?

No, I can say it explicitly. Heli Hangzhou, these first-line brands have a relatively large sales volume. But the quality of other brands is not as good as everyone thinks. Second-tier brands are in some factories, as long as they are well maintained, and there are not a few who use them well.

Domestic brands of diesel forklifts, such as Heli, Maximal, Ji Xinxiang, Hangcha and Liugong, are basically the same in terms of configuration, and the supporting manufacturers are the same. When choosing, you should focus on the strength of the after-sales service ability of the best business around you.

Depending on what type of forklift you buy, the forklift industry is very fine, such as internal combustion forklifts, electric forklifts, reach forklifts, storage forklifts, customized stackers, etc., each brand positioning is different, for example, the positioning of Hangcha Heli is an internal combustion forklift, the sales volume is the world's first, can you say that he is good? Compared with Linde Toyota forklifts, there is a lot of difference in the combined force of Hangzhou forklifts, but the cost-effective Hangzhou fork joint force is the highest. Customized forklifts are easy to move.

There is no best way to buy a forklift, only whether it is suitable or not, for example, do you say Mercedes-Benz BMW Rolls-Royce is good? Definitely good, is Santana BYD Great Wall bad? That's not necessarily, only the right one is the best, Mercedes-Benz BMW and other their failure rate must also be there, just look at your positioning in the **.

Toyota you think it is expensive, you can consider ** Lifu, now it is acquired by Toyota, belongs to Toyota's brand, ** is not high, the car is much easier to use than before Toyota's acquisition, it runs fast, and there are fewer small problems, you can understand it, relatively speaking, Tai Lifu forklift is still valuable, and it can still be worth selling it in a few years, which also shows that the forklift is okay.

Imports are too expensive, just choose Taiwan Lifu, now controlled by Toyota, forklifts for decades, internal combustion forklifts are now cheaper than Heli heard. They all belong to first-class brands, the engines are the same, and in terms of workmanship, Heli, Hangzhou is not as good as Tai Lifu.

My boyfriend bought it from Hangzhou, and I don't know if it's good or not, and I don't know much about this forklift.

No blowing, no black, I still drive Dalian forklifts after 8 years.

I have been driving Liugong forklifts for 7 years and still use them, and I think it is not good.

Nuoli is good, it is a Sino-foreign joint venture, Nuoli forklift is reasonable, and the appearance is also beautiful. The quality of performance is also very good. Every time I want to buy it, I buy it from Nori.

A good forklift is from Linde, Germany.

That's it, that is. It's too expensive, and it's expensive to maintain. The domestic one is a good one.

Imported, of course.

But the price is definitely expensive.

Hangzhou forklift, good after-sales service, good quality of accessories, although each brand has its own strengths, but buy forklifts or Hangzhou fork cost-effective, affordable, old brand listed companies, mainly good service! The handling of other brands of cars is not as good as Hangcha, so choose Hangcha at the same price!

If the electric fork Linde is a little better, but ** is higher If you consider the all-electric stacker, Zhejiang Xilin, Zhejiang Nuoli, Taixing Kailu, Wuxi Kailu is a little more cost-effective.

Hangzhou's R series design is a bit of a problem, it is not good to use, Hangzhou's H series quality is relatively stable, Hangzhou's A series self-weight, only if you want to overload, you can't recommend H type, or Heli.

I am a friend of the forklift Taiwanese brand maintenance for many years, the forklift is quite understanding, by the way, either buy all imported, otherwise all domestic free maintenance costs are not cost-effective.

There is no doubt that it is a result.

In fact, Toyota will not be very expensive, last year I bought a 2T Heli is 12W, and the year before last I bought a Toyota is 18W, but it is definitely Toyota easy to use.

It seems that Linde is also good, and BASF next door used to buy all Linde.

Noblift Forklift Manual Hydraulic Pallet Truck 2 Ton Ton 3 Ton Ground Cattle Lift Pallet Hydraulic Hand Pull Trailer Noblift Heavy Ton Outer Width 550 Length 1150mm

How to say it, since you have learned about the two cars in Qianmian, then I will tell you about the other two domestic forklifts, in fact, the reputation is still very good, that is, Baoli and Jungheinrich, if you want to explain in detail, it is estimated that you will not be able to finish it in three days and three nights.

It is recommended to buy Liugong forklifts to resist construction.

Forklifts are unlicensed and unlicensed, and they can't buy them if they want to, but forklifts can't run on the road, and they must be carried by freight trucks to travel, so according to the traffic law, because they can't drive on the road, they won't cause traffic accidents.

Good forklift choose Mitsubishi. Toyota. With my driving habits, I think Toyota forklifts are good.

Simple controls. Convenient. Good value for money.

Some say it's Linde. But Linde ** high. High maintenance costs.

The service life is not as long as that of Toyota. The previous company used Mitsubishi (import).Now it is produced in Shanghai.

There is no major problem with the maintenance for five or six years. The same goes for Toyota. (The above is a personal opinion.)

FYI).

It's pretty good, we've been using Toyota forklifts, which are the boss in terms of appearance, safety and performance.

Yes, the best in the world is Linde, and the best in China is combined.

Toyota is good, they all say that the quality is very good.