Lenovo A60 mobile phone boot appears in English

It could be that you accidentally entered engineering mode.

Here's how: After selecting reboot with the volume down button, press the power button, and it's good to restart.

Reasons for unintentional entry:

Due to the unreasonable design of the volume keys, sometimes you will accidentally touch the volume down button when you turn on the machine, and you will enter the engineering mode, when there is a G3 interface when you first enter, there is a prompt to press and hold the power button to start normally, and after a while, it has entered the engineering mode. Follow the above methods to exit.

It may be that you accidentally pressed the volume button + power button to enter the engineering mode, please check if you see the reboot option, if so, you use the volume button to select reboot (restart), and then click the home button to confirm, to see if you can reboot into the system.

If it still doesn't work, you can directly buckle the battery to restart and try, if every time you turn on the computer or still enter the mode, there may be a problem such as the camera button or the volume button is stuck or the system has a problem, it is recommended that you can take the time to bring the warranty card or invoice to contact the local maintenance site for further testing and processing. Inquire about authorized maintenance sites on the official website.

Hello, when turning on the computer, just press the power on button, please do not touch the other buttons until it is turned on normally before using it.

Think Forum:

Lenovo Community.

The battery is deducted *****=== and it is good to turn it back on.

Normal, just imagine if the charging screen does not go black, is it necessary to increase the charging time.

It's charged, I remember it will be bright, it's a big deal to see if it's full manually - hehe, get it, adopt mine.

Lenovo authorized repair site inquiry.

The business hours of the maintenance site are usually from 9:00 to 18:00 from Monday to Sunday, and the stations will be slightly adjusted according to their own operations.

IDEA Forum:

Think Forum:

Lenovo Community.

Do you prefer the post or the person who posted it.

IDEA Forum:

Think Forum:

Lenovo Community.

Sorry, the system appears in English, it may be caused by some software crash in the system, it is recommended that you back up your data (contacts, text messages, **, etc.), and then go to your phone's settings (settings), select backup or reset, and then choose to try to restore factory settings.

Hello. We apologize for the inconvenience.

According to your screenshots, your phone may have entered the test mode by mistake, here it is recommended that you try to use the phone's volume key to move the option to the "reboot" option, and then click the phone's home button to restart and try to see if it can enter the source and which skin enters the normal handhail machine.

If the phone still enters the test mode by itself after restarting, or you cannot restart it through the above operations, it is recommended that you remove the back cover and battery, and then press and hold the power button again (please avoid touching other keys at the same time) to restart the attempt.

If the problem persists after resetting the factory settings, it is recommended that you take the time to send your phone to a Lenovo after-sales repair site for specific testing and repair.

You can access:

Find the nearest site. The business hours of the maintenance site are usually from 9:00 to 18:00 from Monday to Sunday, except for holidays, and the stations will be slightly adjusted according to their own operations.

You are welcome to contact us or visit Lenovo at any time

Consult to find out.

Hello. The boot will appear in English because the boot has entered engineering mode.

Sorry, the abnormal boot into engineering mode may be caused by accidentally pressing the combination of the power button and the volume button before, or it is caused by the rapid failure abnormality.

Jian Songchang suggested that you can first try to force the shutdown (such as removing the battery) and restart it. Note: You can't press the phone's volume keys at the same time. Nowa.

If the boot automatically enters the engineering mode frequently, it is recommended that you back up the important data of the lower fuselage, and then restore the factory settings to see if it can be improved.

If the problem persists, it needs to be sent to the repair station for testing and solving.

You can visit the official website for inquiries:

You are welcome to contact us or visit Lenovo at any time

Consult to find out.

Hello. We apologize for affecting your use.

The boot abnormality may be caused by you accidentally pressing the combination of the power button and the volume button to enter engineering mode (or factory mode), or the system is abnormal.

If you have entered the project mode (or factory mode) interface with many English words, then use the volume button to select reboot, and then click the power button to confirm to see if you can reboot into the system.

If it doesn't work, it is recommended that you try to remove the battery and force it to shut down and restart it. Note: You can't press the phone's volume keys at the same time.

If you frequently turn on the machine and automatically enter the engineering mode (or factory mode), it is recommended that you back up the important data of the fuselage and restore the factory settings to see if it can be improved.

If the problem persists, it needs to be sent to the repair station for detection and resolution, and it is not excluded that it is an abnormal button or a system abnormality.

Inquire about authorized maintenance sites on the official website.

You are welcome to contact us or visit Lenovo at any time

Consult to find out.

There may be a problem with the system, try to restore the backup data to the factory.

It should be that there is a problem with the hard disk, and the computer cannot recognize the hard disk, resulting in the inability to turn on.

Most of them are caused by problems with the hard drive motor, or it may be because the hard drive cable is not plugged in.

It can be solved by:

1. Check whether the hard disk is loose and whether the hard disk data cable is loose.

2. Try a new data cable.

3. Use the U disk boot disk to enter the PE system to see if the hard disk is recognized.

If none of the above methods work, you can only get to the repair point and ask a professional to solve it.