What procedures are required for engineering consulting qualifications?

1.Application Form for Construction Enterprise Qualification signed by the legal representative of the enterprise and electronic documents;

2.A copy of the business license of the enterprise legal person and a copy of the safety production license;

3.The original and copy of the enterprise qualification certificate (including the change record column);

4.A copy of the articles of association of the enterprise (with the signature or seal of the shareholder) and a copy of the organization certificate;

5.Appointment documents of the legal representative and a copy of the identity document;

6.Appointment documents, title certificates, ID cards and copies of enterprise managers, technical, financial and operational leaders;

7.Registered Practising Certificate of Registered Constructor;

8.Copies of professional title certificates, identity documents, and labor contracts of engineering and economic management personnel of the enterprise;

9.If there are several requirements for professionals and skilled workers, they shall provide professional title certificates or post certificates, identity documents, labor contracts and proof materials reflecting the profession, and social security certificates;

10.On behalf of the project's bid-winning notice, construction contract, completion acceptance sheet or quality inspection information, it is necessary to provide drawings, **, project settlement statements, etc.;

11.Statistical reports for the past three years ("Basic Information Table of Legal Entities", "Production of Construction Enterprises", "Financial Status and Material Consumption of Construction Enterprises");

12.Audited financial statements (balance sheet and income statement) for the last three years;

13.If the qualification standard has specific requirements for the equipment and plant of the enterprise, the enterprise shall issue relevant certificates such as equipment purchase or lease contracts, invoices, housing property rights certificates or lease contracts;

14.Other materials required by laws and regulations.

Conditions are required for engineering consulting qualificationsThere are three levels of engineering consulting unit qualifications: A, B and C.

The qualifications of Class A and Class B engineering consulting units shall be preliminarily examined by the professional committees (including branches) established by the provinces, autonomous regions, municipalities directly under the Central Government, cities specifically designated in the state plan, the Xinjiang Production and Construction Corps Engineering Consulting Association, and the China Engineering Consulting Association in various industries, and shall be submitted to the China Engineering Consulting Association for review and recognition, and the "Engineering Consulting Qualification Certificate" shall be issued.

The qualification of Class C engineering consulting unit shall be reviewed and recognized by the engineering consulting association of provinces, autonomous regions, municipalities directly under the central government, cities specifically designated in the state plan and the Xinjiang Production and Construction Corps, and the corresponding "Engineering Consulting Qualification Certificate" shall be issued and reported to the China Engineering Consulting Association for the record.

Class B Engineering Consulting Qualification:

Qualification criteria for Class B engineering consulting units.

1) Basic conditions.

1. Comprehensive strength and performance. Engaged in engineering consulting business for more than 3 years, independently undertake no less than 10 engineering consulting tasks for national or local medium-sized capital construction projects or technical transformation projects, and have a good social reputation.

Units that have been engaged in engineering consulting business for less than 3 years can apply for the temporary qualification of Class A engineering consulting.

2. The registered capital shall not be less than 1 million yuan, or the fixed assets shall not be less than 800,000 yuan.

3. Have a relatively fixed and good office space.

4. The annual operating income of engineering consulting is more than 1 million yuan.

All units applying for engineering consulting qualifications generally need to start from Class C qualifications, and Class C engineering consulting qualifications need to meet the following conditions: 1. The registered capital shall not be less than 500,000 yuan (except for public institutions); 2. Have a fixed office space, and the area of the place shall not be less than 6 square meters; 3. Have a performance certificate; 4. Have a strict quality management system; 5. Each professional field needs to be equipped with no less than 5 professionals, and at least 1 registered engineering consultant; 6. The main person in charge needs to have an intermediate technical title or above, and has been engaged in this work for no less than 5 years.

The following information shall be provided to the construction administrative department to apply for qualifications:

1.Application form for construction enterprise qualification (in quadruplicate) and corresponding electronic documents;

2.A copy of the business license of the enterprise and the capital verification report;

3.Articles of Association;

4.Appointment documents, title certificates, and ID cards of the legal representative of the enterprise and the person in charge of technology, finance and operation of the enterprise;

5.Enterprise project manager qualification certificate, ID card, social insurance certificate;

6.Title certificates, ID cards, and social insurance certificates of enterprise engineering and economic management personnel;

7.Those who apply for additional items shall provide personnel, equipment, and performance that are appropriate to the scope of the additional items;

8.If the qualification standard clearly requires the enterprise to have its own equipment and plant, the enterprise shall issue the purchase contract, invoice, housing property right certificate or housing lease contract and other corresponding certificates;

9.Other relevant documents and materials that need to be issued.

1.Basic conditions.

1) Comprehensive strength and performance, engaged in engineering consulting business for more than 5 years, independently undertake no less than 10 engineering consulting tasks for national or local large-scale capital construction projects or technical transformation projects, and have outstanding social reputation

2) The registered capital is not less than 2 million yuan, or the fixed assets are not less than 1.5 million yuan.

3) Have a good fixed office space.

4) The annual operating income of engineering consulting is more than 2 million yuan.

2.Technical power.

What are the requirements for engineering consulting qualifications? I think that like this kind of consultation, what he said about your conditions is still more, and your own words are based on the previous place, that is, the qualifications are to put Li Pan's qualifications company.

All units that apply for engineering consulting qualifications generally need to start from the C-level qualification, and the C-level engineering consulting qualification needs to meet the following conditions:

1. The registered capital shall not be less than 500,000 yuan (except for public institutions);

2. Have a fixed office space, and the area of the place shall not be less than 6 square meters;

3. Have a performance certificate;

4. Have a strict quality management system;

5. Each professional field needs to be equipped with no less than 5 professionals, and at least 1 registered engineering consultant;

6. The main person in charge needs to have an intermediate technical title or above, and has been engaged in this work for no less than 5 years.

1. Overview of the latest engineering consulting enterprise qualification level standards:

1) Grade nail qualification standards.

2) Class B qualification standards.

3) Class C qualification standards.

4) The scope of the contracted project.

2. Qualification standards for engineering consulting Grade A enterprises:

Class A Eligibility Criteria:

1) Basic conditions.

1. The construction enterprise has been engaged in engineering consulting business for no less than 5 years, and the corresponding consulting results of the professional service scope are not less than 5, and there is no bad record;

2. The registered capital of the construction unit shall not be less than 5 million yuan (except for public institutions);

3. Have a fixed office space, with an average usable area of not less than 6 square meters;

4. Preferentially preferably presided over or participated in the formulation of relevant industry standards and technical specifications.

2) Technical strength:

1. There shall be no less than 60 technical personnel engaged in engineering consulting business in construction enterprises, of which no less than 30% shall be personnel with senior professional and technical and economic titles, and registered consulting engineers (investment) shall not be less than 15% of the total number of technical personnel, and the employment of full-time retired professional and technical personnel shall not be higher than 10 of the total number of technical personnel, and the above personnel shall not practice in two or more engineering consulting units at the same time;

2. Each professional field is equipped with no less than 5 professional and technical personnel and at least 2 registered consulting engineers (investment);

3. The main technical person in charge of the construction unit shall have the qualification of registered consulting engineer (investment) and be engaged in engineering consulting and related business for no less than 10 years.

3) Technical level and technical equipment:

1. Master modern engineering technology and project management methods, advanced technical equipment, have a relatively complete accumulation of professional and technical data, and the means to deal with relevant business information at home and abroad;

2. The construction unit has the ability to undertake foreign engineering consulting business independently or in cooperation with domestic and foreign engineering consulting units;

3. The professional and technical personnel directly engaged in the business of the construction unit are equipped with no less than 1 computer, complete communication and information processing means, can apply engineering technology and economic evaluation system software to carry out business, and use all computers and system software to complete the preparation of engineering consulting results documents and economic evaluation.

4) Management level:

1. Have a sound organizational structure and a sound management system;

2. There is a strict quality management system and system, and it has passed the ISO9000 family quality management system certification.

3. Qualification standards for engineering consulting Class B enterprises:

Compared with the qualification standards of Class A engineering consulting enterprises, the qualification standards of Class B engineering consulting enterprises have certain requirements for the construction enterprise funds, the management and technical personnel of the construction units, and the performance of the construction enterprises.

Fourth, engineering consulting class C enterprise qualification standards:

Compared with the qualification standard of Grade B engineering consulting enterprise, the qualification standard of Grade C engineering consulting enterprise has certain requirements for the construction enterprise capital of construction enterprises, the management and technical personnel of construction units, and the engineering performance of construction enterprises.

Qualifications: Article 3 (3) of the "Guiding Opinions on Whole-process Engineering Consulting" stipulates: "When the whole-process consulting unit provides survey, design, supervision or cost consulting services, it shall have the qualifications suitable for the scale of the project and the content of the commission.

The whole-process consulting service unit shall complete the business within the scope of its own qualification certificate on its own, and on the premise of ensuring the integrity of the entire project, in accordance with the contract or with the consent of the construction unit, the consulting business outside the scope of its own qualification certificate may be entrusted to the unit with corresponding qualifications or capabilities in accordance with laws and regulations, and the whole-process consulting service unit shall be responsible for the entrusted business of the entrusted unit.

If the construction unit selects a unit with the corresponding engineering survey, design, supervision or cost consulting qualifications to carry out the whole process of consulting services, except as otherwise provided by laws and regulations, it may no longer entrust the survey, design, supervision or cost consulting unit. This means that there is no clear restriction on the qualifications of enterprises undertaking whole-process engineering consulting at the current national level, and only when whole-process engineering consulting enterprises undertake survey, planning and design, supervision, and cost consulting, they should have the corresponding qualifications prescribed by law.

Service ability: Article 4 (3) of the "Guiding Opinions on Whole-process Engineering Consulting" stipulates that "the whole-process engineering consulting unit shall have rich experience in technology, economy, management, law, etc., and have the service ability to adapt to the whole-process engineering consulting business, and have a good reputation."

The whole-process engineering consulting unit shall establish a professional department and organization suitable for its consulting business, equipped with professional consulting personnel with a reasonable structure, enhance its core competitiveness, and cultivate comprehensive diversified services and one-stop integrated service capabilities for systemic problems. It can be seen that the whole process of engineering consulting enterprises should have the ability to provide consulting services in terms of organization, management, economy and technology, with a good reputation, corresponding organizational structure, sound engineering consulting service management system and risk control capabilities.

Credit requirements: Article 23 of the "Measures for the Management of the Engineering Consulting Industry" and the "Credit Evaluation Standards for Engineering Consulting Units" clearly stipulate the relevant credit evaluation standards and corresponding credit management systems for engineering consulting enterprises. Therefore, in practice, in addition to the corresponding qualifications, the whole process engineering consulting enterprises may also need to meet the relevant credit rating standards.

Personnel requirements: According to the provisions of Article 4 (3) of the Guiding Opinions on Whole-process Engineering Consulting, the person in charge of the whole-process engineering construction consulting project shall obtain the registered practice qualification of engineering construction and have senior professional titles in engineering and engineering economics, and have similar engineering experience. For the person in charge of undertaking engineering survey, design, supervision or cost consulting business in the whole process of engineering construction consulting services, he shall have the corresponding professional qualifications stipulated by laws and regulations.

The whole-process consulting service unit shall be equipped with professional and technical personnel and management personnel with corresponding practice rubber ruler capabilities according to the needs of project management. When setting up a planning unit to carry out whole-process consultation in civil construction, it is necessary to give full play to the leading role of architects.

The scope of engineering consulting qualifications includes the following eight contents:

1.Planning consulting: including the preparation and consultation of industry, special and regional development plans;

2.Preparation of project proposals (including project investment machine sales studies and pre-feasibility studies);

3.Prepare the feasibility study report, project application report and fund application report;

4.Evaluation consultation: including project proposal, feasibility study report, project application report and preliminary design evaluation, as well as post-project evaluation, budget and final account review, etc.;

5.Design;

6.Tender**;

7.engineering supervision, equipment supervision;

8.Engineering project management: including the whole process or several stages of the management service of the project.

The engineering consulting business is very flexible, which can be macro, whole, and whole-process consulting, or it can be a consultation on a certain problem, a certain content, or a certain work. Each consulting assignment is a one-off, individual task with only similarities and no repetition. Engineering consulting is a highly intelligent service that requires the integration and innovation of multidisciplinary knowledge, technology, experience, methods and information.

Engineering consulting involves a wide range of fields, including politics, economy, technology, society, culture and other fields, which requires the coordination and management of various aspects of the relationship, and the consideration of various complex and variable factors. Investment projects are more bound by relevant conditions, and the results of consultation are the result of full analysis and study of various constraints and risks, which can be positive or negative. An evaluation report that concludes that "the project is not feasible" can also be a consulting report of excellent quality.