What is carbon used in table tennis rackets? 15

The principle is to reduce the deformation time of the base plate and increase the energy during deformation, so after the carbon base plate contacts the ball, the ball leaves the ball for a shorter time and has more force, so the speed is faster, but the rotation is usually worse than that of a pure wooden board.

It is lighter than the same thickness of the non-carbonized baseplate, it does not shake the hand, the speed and return strength are also better, and it should be easier to eat the ball, which is better than other non-carbonized rackets, because the carbon does not react with water vapor or air at room temperature.

This is purely my personal opinion, I studied chemistry. The word "eat ball" is in front of my reading book, Professor Tang Jianjun's book, pure hand-played, table tennis enthusiasts will answer for you, I hope to add points.

It makes the racket lighter, more elastic and faster after hitting the ball.

It reduces the deformation time of the racket and can hit high-speed and low-arc balls, which is extremely lethal.

Adding carbon to the ball will be faster, and the borrowing force will be better. However, it is better not to buy domestic carbon plates.

Harder, more elastic, explosive, fast, not well controlled.

Increasing the speed of the ball is, to put it bluntly, elastic.

Increase the speed of the return ball and increase the power.

Faster and more explosive.

But perhaps the control has weakened.

There are several differences between carbon table tennis rackets and ordinary rackets:

1. The feel is different.

The all-carbon table tennis racket feels very comfortable to use, and it will not be deformed under general stress. Whereas the opposite is true for regular rackets.

2. The weight is different.

An all-carbon table tennis racket is lighter than a regular racket.

3. The elasticity of the racket is different.

The all-carbon table tennis racket has better elasticity than ordinary rackets, feels comfortable in the hand, and has a balanced impact on the ball.

4. The performance of eating balls is different.

A normal racquet performs well when eating the ball, which means that the ball can hit the paddle and eat the ball deeper. This makes the friction more complete and the rotation strong. At the same time, because the deformation is relatively large.

So the ball is not so fast, the control is better, and of course, because the ball is not that fast, the speed is slightly slower. Another advantage of a regular racket is that it feels good. And the carbon racket is far from eating the ball.

5. The speed of the ball is different.

The average racket is slower, but has better control, better spin, and better tail strength. Of course, the control is even worse. However, there are many types of carbon plates, ranging from the violently woven carbon that Ross attacks, to the thin layers of carbon fiber like Marlin Soft Carbon.

Carbon rackets have a carbon layer, which is hardened, has little deformation, is poorly controlled, and is relatively fuzzy. However, the ball is fast, and if it is good, it can also give strong spins. High-speed rotation requires high technology.

Summary. Hello, the carbonized baseplate is lighter, more elastic, and the ball is faster, and the non-carbonized baseplate feels very good, which is convenient for ball control, and the racket is elastic and even, and the ball is deeper when rubbing.

Hello, the carbonized baseplate is more in the friend's lighter book, the elasticity is greater, the ball speed is faster, the non-carbonized baseplate feels very good, it is convenient to control the ball, the racket is elastic and even, and the ball is more sold when rubbing.

The carbon will be harder, the ball stays on the racket for a shorter time, and most of the domestic carbon plates are relatively stiff, and the ball has not been out before the force, so that the strength is not as strong as the ...... of pure woodImported ones are much better. Add carbon to play more labor-saving, suitable for girls with little strength, such as Liang Zhengguo if you have a lot of strength, play pure wood than play carbon power.

The differences between carbon table tennis rackets and ordinary rackets are as follows:

1. The feel of the two is different.

The all-carbon table tennis racket is very tactile to use, and it will not be deformed under general stress. On the contrary, ordinary shooting will be.

2. The weight of the two is different.

The all-carbon table tennis racket is lighter than a regular racket.

3. The elasticity of the two rackets is different.

The all-carbon table tennis racket has good elasticity compared to ordinary rackets, has a comfortable feel, and has a balanced impact on the ball.

The principle of carbon table tennis racket is to reduce the deformation time of the bottom plate and increase the energy during deformation, so after the carbon bottom plate contacts the ball, the ball leaves the board for a shorter time and has more strength, so the speed is faster, but the rotation is usually worse than that of a pure wooden board.

Yes, the elasticity of carbon is better, but the vibration is large, it is difficult to control, and it is not good to eat balls.

Carbon plates, according to their processes, are thin, light and elastic.

Many novices like to use carbon plates, which is easy to use. But in reality, the short ball is difficult to control, and the force is also difficult to control, and it is not as good as a solid hardwood baseplate.

However, the use of pure wood hard bottom board requires a lot of practice and a solid foundation in order to use it well.

Table tennis players on national or professional teams now almost exclusively use pure wooden baseboards. Because their power is completely fine.

The carbon bottom plate is generally harder and has better force, but the feel is not as good as that of a pure wooden board, and the rotation is not as good.

Moreover, the carbon bottom plate is afraid of falling, and it is very problematic to play when the carbon layer is broken.

……Are they all so professional? I don't know what carbonization is, but I do know that a racket with a carbon line is more comfortable to hit the ball and not easy to get out of shape.

The addition of carbon fiber increases the elasticity of the racket, resulting in an increase in the power of hitting the ball.

The so-called carbon application by general netizens is the carbon fiber sandwich bottom plate of the butterfly brand named after Schlager.

This is the legendary "steel plate" - the fastest and hardest bottom plate in the butterfly product line, the bottom strength is super strong (3 cypress and 2 carbon), but it is difficult to control, it is a fairly high-end plate bottom.

Definitely not recommended for newbies. Although it is a high-end board, the performance of this bottom is too extreme for even an amateur player of a certain age to control.

The official one is like this, stick it to you:

butterfly

Model: 31801

Name: Schrager Carbon Plate, Charcoal).

Shank type: FL ST

Type: Offensive.

Speed: Super-fast.

Ball feeling: Hard. Structure: three-ply wood (cypress) two-ply carbon (

Plate thickness: Description: used by the world champion, the fastest and strongest baseplate, used by Schrager players. **Force.

World champion Schrager uses, the base plate is strong and powerful, surging power, 2 layers of carbon guarantee the power and strength of the blow, and the surface of the cypress wood is the guarantee of eating the ball. The fastest of the butterfly baseplates.

Market**: 1055 yuan.

Take a look at this brother's review, and you will understand what is called "heavy **, steel plate".

Butterfly stands for Carbon Fiber Sandwich Base Plate.