How do you clean the data cable of the Apple mobile phone when it is dirty?

Preparation: Makeup remover, appropriate amount of cotton pads.

Operation steps: 1. Pour a little cleansing water on the cleansing cotton.

2. Wrap the makeup remover on the data cable and start wiping back and forth (if it is particularly dirty, you can change the cotton pad several times).

3. After wiping, wipe the makeup remover on the earphones again with a clean makeup remover pad.

4. After the above operations, the stains on the data line will be cleaned up.

Practical tips for cleaning mobile phone data cables!

There are several ways to clean the Apple cable:

Eraser: Use the eraser to remove stains.

Laundry soap: Melt a small piece of laundry soap with warm water, then wipe the cable with a small amount of solution dipped in a cotton cloth, and finally dry it with a dry towel.

Toothpaste: Squeeze out a little toothpaste mixed with a small amount of water, then wipe with a small amount with a cotton cloth, and finally dry with a dry towel.

Alcohol: Drop alcohol with cotton, wipe along the ear line and data cable, and finally dry naturally.

White vinegar: Add white vinegar with cotton and wipe along the ear line and data cable.

Laundry detergent can be wiped with water... There is an imported detergent, the kind that washes the interior of the car, which can be easily wiped off, try it boldly, how much does it cost to buy a root.

Warm water small towel soap (just the ordinary yellow kind of alkaline soap) 1Dip a towel in a little warm water and rub it on the soap, then wrap the cable from one end to the otherChange the position of the towel and wipe it twice along the soapy water with a dry one, and it will be very clean3

If not too satisfied repeated.

4.Moisten a towel in warm clean water, wipe it once, and dry it.

Just wipe it with a damp cloth.

Summary. The most effective cleaning method for a dirty Apple charging cable is as follows:1,The eraser method is very simple,Take a good eraser,**Dirty wipe**,But this method is limited to a small area on the earphones。

2. In the warm boiled water method, the part of the plug wire is soaked in warm boiled water at 40 to 60 degrees for a few minutes, and after taking it out, start wiping it with a soft cloth or napkin until it is clean. 3. Wet wipes method, similar to the warm boiled water method, buy a piece of wet wipes, if there is too much water, first wring out the water in the wet wipes, and then wipe it directly.

The most effective cleaning method for a dirty Apple charging cable is as follows:1,The eraser method is very simple,Take a good eraser,**Dirty wipe**,But this method is limited to a small area on the earphones。 2. In the warm boiled water method, the part of the plug wire is soaked in warm boiled water at 40 to 60 degrees for a few minutes, and after taking it out, start wiping it with a soft cloth or napkin until it is clean.

3. Wet wipes method, similar to the warm boiled water method, buy a piece of wet wipes, if there is too much water, first wring out the water in the wet wipes, and then wipe it directly.

If the metal piece is black, it is recommended that you use the first eraser method.

1. Wipe with a hot towel. Immerse the towel in hot water, wring it out, and wipe the cable evenly, you will find that the dirt on the cable is attached to the towel, and the cable becomes brand new.

2. Wash with toothpaste. Apply the toothpaste to a paper towel or discarded toothbrush, wipe evenly, and the cable will be clean in no time. Toothpaste can be cleaned of many things except for the toothbrush.

3. Cleansing water. It is also a very good way to clean the cable with makeup remover. If you are a man, you can ask your female friends or colleagues to borrow it, and you don't have to be embarrassed, you can generously say that if you borrow something to wipe something, others will borrow it.

4. Alcohol. Use cotton to drip with alcohol, wipe along the ear line and data cable, and finally dry naturally. This can clean the interface, but alcohol tends to cause the line to deteriorate, but it has little effect.

5. Laundry soap. Laundry soap can also be used to clean the data cable and earphone cable, cut a small piece of laundry soap and melt it with warm water, then wipe the ear cable and data cable with a small amount of solution dipped in a cotton cloth, and finally dry it with a dry towel.

Tools needed: sponge, toothpaste.

1. First of all, prepare to find a clean sponge, as shown in the figure below

<>3. Place the data cable on top of the toothpaste, as shown in the figure below

4. Clamp tightly with a sponge, as shown in the figure below

5. Then pull back and forth, as shown in the figure below

6. In this way, the dirty things on the data line will come down, as shown in the figure below

7. After the scrubbing is completed, the data cable will be the same as new, as shown in the figure below