How to calculate the area of the color steel house 5, how to calculate the area of the color steel r

Area calculation. Single-layer area = (number of ks in the direction of length and number of ks in the direction of width.)

Double-layer area = single-layer area x 2

The staircase area is calculated as a horizontal projection area.

The platform area is calculated as half of the actual area.

Pricing principles. Calculated in square metres**.

Number of squares * unit price + shipping fee = last**.

First. Roof; Your house should float 25 centimeters around it. Then the area is squared.

Second, the square of the wall.

Third, cement floor C15 10 minutes thick = cubic.

Fourth, it should not be channel steel. The square tube used can be used (the advantage of using the square tube is that it can be wrapped in color steel).

The total cost is 50 square color steel x65 = 3250 + cement floor (including square pipe foundation) 400 + square pipe 500 + other 500 = about 4500.

Other than that; For such a small house, you can do without channel steel and square pipes (if there is no typhoon in the coastal area), and your roof should be made high in the front and low in the back. It's so good to drain water. If you want aluminum windows, then at +180 (material squared.

We are a contractor according to the ground** Your above example is 12 square if you use general materials less than 200 square meters.

The price of the roof is generally different from the price of the wall.

It is also different in different periods of time**.

You can go to the nearby place that sells color steel and ask.

Algorithms aren't a kind of look, see how cost-effective you are.

Summary. 1. Single-layer area = (number of length direction k and width direction k number;

2. Double-layer area = single-layer area x 2 staircase area is calculated according to the horizontal projection area;

3. The platform area is calculated according to half of the actual area and calculated according to the square meter**: the number of squares * unit price + freight + labor cost = final**k number = number of boards.

How to calculate the area of the color steel plate house?

Hello, I have seen your question and am sorting out the answer, please wait a while

1.The area calculation of the color steel house is calculated according to the area, that is, the actual use area of the color steel plate;

The area calculation table of prefabricated house is 4238cbb6-c322-4be4-9558-423014240453

1.The area calculation of the color steel house is calculated according to the area, that is, the actual use area of the color steel plate;

I don't really understand. 1. Single-layer area = (number of length direction k and width direction k number; 2. Double-layer area = single-layer area x 2 staircase area is calculated according to the horizontal projection area of the royal gaze; 3. The area of the flat number of filial piety is calculated according to half of the actual area, and the price is calculated according to the square meter: the number of square meters * unit price + freight + labor cost = the final **k number = the number of boards.

My board room is 16 meters long and 7 meters wide, how to calculate the area.

Kiss; Length times width is the area.

Let's put it this way, the length is three 16 meters, the width is five 7 meters, and the height is 3 meters3, how should the total area be calculated.

1. Single-layer area = (number of length direction k and width direction k number; 2. Double-layer area = single-layer area x 2 staircase area according to the water royal staring flat projection area counting, demolition and filial piety; 3. The platform area is calculated according to half of the actual area, and is calculated according to the square meter**: the square number of potato manuscripts * unit price + freight + labor cost = final**k number = the number of boards.

Summary. 1.The area of the color steel plate house is calculated according to the length and width of the outer wall and multiplied by the number of floors.

2.Outdoor stairs and walkways are calculated according to the sum of the projected areas of the natural layer. 3.

The awning is calculated as half of the horizontal projection area. 4.Slabs protruding beyond the wall are not counted as floor area.

1.The area of the color steel plate room is calculated according to the length and width of the side of the external macro wall multiplied by the number of layers and circles. 2.

Outdoor stairs and walkways are calculated according to the sum of the projected areas of the natural layer. 3.The awning is calculated as half of the horizontal projection area.

4.Slabs jutting out of the wall outside the orange state are not counted in the floor area.

The area calculation of the color steel house is calculated according to the area, that is, the actual use area of the color steel plate;

1. Single-layer area = (number of length direction k and width direction k number; 2. Double-layer area = single-layer area x 2 staircase area according to the water royal staring flat projection area counting, demolition and filial piety; 3. The platform area is calculated according to half of the actual area, and is calculated according to the square meter**: the square number of potato manuscripts * unit price + freight + labor cost = final**k number = the number of boards.

Calculation of ridge volume per acre.

Single-layer area = (number of ks in the direction of length and number of ks in the direction of width.)

Double-layer area = single-layer area x 2

The staircase area is calculated as a horizontal projection area.

The area of the platform is calculated as half of the actual area of the plant.

Pricing principles. Calculated according to square meters**: number of squares * unit price + freight = last**.

Abstract:The color steel plate house is a kind of building assembled with the color steel plate as the skeleton and the sandwich panel as the enclosure material, which has the characteristics of beautiful appearance, economy and practicality, self-slowing and light weight, convenient assembly and disassembly, etc., and is widely used in on-site temporary facilities and construction sites and workshops. The cost of the color steel plate activity house is generally different according to the type and structure of the color steel plate used, from more than 200 yuan to more than 700 yuan per square meter, and the calculation of the area is to calculate the length and width of the outer wall multiplied by the number of floors + outdoor stairs and walkway area + awning area.

Let's take a look at how much a square meter of color steel plate house cost. 1. What is a color steel plate house?

Color steel plate house, as the name suggests, is a house built with color steel plate, also known as color steel plate activity house, is based on color steel plate as the skeleton, sandwich panel as the enclosure material, with standard module series for space combination, components made of bolts made of economic movable board house, can be easily and quickly assembled and disassembled, to achieve the general standardization of temporary buildings.

The color steel plate room has the characteristics of beautiful appearance, economic and practical, light weight, convenient assembly and disassembly, short installation period, etc., especially suitable for the needs of emergency projects, and is widely used in offices, sales offices, classrooms, shops, tea houses, exhibition halls, hospitals, dormitories, canteens, industrial plants, warehouses, parking lots, simple sheds, single-slope houses, activity booths, activity villas, on-site temporary facilities and other fields.

Second, how much does the color steel plate house cost per square meter.

Color steel plate house is suitable, economical and practical, many temporary buildings will use this structure of the house, so how much is a square meter of color steel plate house?

In addition, the color steel of different structures will also affect its cost, and the color steel plate house with a layer structure is relatively simple, usually more than 200 yuan per square meter; The color steel plate house on the construction site is relatively strong, and the cost is also more expensive, about 400 yuan per square meter; Color steel houses such as factories are more expensive, reaching 700 yuan and above per square meter. (The above information ** network, for reference only).

3. How to calculate the area of the color steel plate mobile house.

The cost of the color steel plate mobile house is generally calculated according to the square meter**: the number of square meters * unit price + freight = final**, the calculation method of the area of the color steel room is as follows:

1. The area of the color steel plate house is calculated according to the length and width of the outer wall and multiplied by the number of floors.

2. Outdoor stairs and walkways are calculated according to the sum of the projection area of the natural layer.

3. The awning is calculated as half of the horizontal projection area.

4. The floor area of the board protruding from the wall is not calculated.

5. Total area = (1) + (2) + (3).

6. There are two stairs on the standard floor, one on the left and one on the left and one on the wall, each staircase? When adding or decreasing stairs, you can increase or decrease by this number.

7. Unless otherwise specified, the calculation method of engineering quantity shall be adjusted according to the above calculation formula.

Calculating the area of the color steel house can be carried out by following the steps below:

1.Determine the shape of the color steel room: The color steel room can be rectangular, square or other differential shapes. First of all, determine the overall shape of the color steel room.

2.Measure the length and width: Use a measuring tool (such as a ruler or measuring tape) to measure the length and width of the virtual fingers of the color steel room. Make sure to measure both dimensions accurately.

3.Calculate the area: According to the shape of the color steel house, use the appropriate formula to calculate the area.

For rectangular or square color steel houses: area = length and width.

For other shapes of the color steel room: if the color steel room can be approximately regarded as composed of a plurality of simple figures (such as rectangle, triangle, trapezoid, etc.), the color steel room can be divided into these simple shapes and calculate their impact area respectively, and then add these areas to obtain the total area.

4.Results: According to the calculation results, the area of the color steel house is obtained, and it is expressed in a suitable unit, such as square meters or square feet.

The above method is suitable for calculating the bottom area of the color steel house. If you need to calculate the overall area of the color steel house (including walls, roofs, etc.), you need to calculate the area of each part and add them up to get the total volume. <>

Summary. Rules for calculating the area of color steel plates.

1.The area of the board house is calculated according to the length and width of the outer wall multiplied by the number of floors;

2.Outdoor stairs and walkways are calculated according to the sum of the projected areas of the natural layer.

3.The canopy is calculated as half of the horizontal projection area;

4.Floating boards protruding from the wall are not counted as floor area;

5.There are two stairs on the standard floor, one on the left and one on the left and one on the wall, each staircase is calculated according to square meters, and the increase or decrease can be done according to this number;

6.Total area = (1) + (2) + (3);

How to calculate the area of color steel?

Hello, happy to answer your questions.

Calculation rules for the area of color steel plate 1The area of the board house is calculated according to the length and width of the outer wall multiplied by the number of floors; 2.Outdoor stairs and walkways are calculated according to the sum of the projected areas of the natural layer. 3.

The canopy is calculated as half of the area of the horizontal projection hall; 4.Floating boards protruding from the wall are not counted as floor area; 5.The two floors of the standard floor are dressed up without ladders, one on the left and one on the left and right walls, and each staircase is calculated according to square meters, and the increase or decrease can be done according to this number; 6.

Total area = (1) + (2) + (3); Laugh poorly.

Summary. Hello, the area calculation of the color steel plate house: of course, you must first plan the components of the house to be built, and measure the area occupied by each part.

After these preparations are done, you can calculate the cost of the color steel plate house. The total area of the house should consist of the wall area of the board house plus the area of the corridor on each floor plus the area of the roof. The wall area is the simplest, the length of each layer of the wall is multiplied by the width and the number of layers, and if there is a partition wall, the area of the partition is additional.

The corridor area only needs to be calculated as the sum of the projected areas of the natural layer (the projected area of the natural layer is the sum of the areas of all the layers).

Hello, dear, is answering this question for you, you need to wait patiently for about three minutes, the answer will be revealed for you immediately, please don't worry!

Hello, the calculation of the area of the house: of course, we must first plan the components of the house to be built, and measure the area occupied by each part. After these preparations are done, you can calculate the cost of the color steel plate house.

The total area of the house should consist of the wall area of the board house plus the area of the corridor on each floor plus the area of the roof. The wall area is the simplest, the length of each layer of the wall is multiplied by the width and the number of layers, and if there is a partition wall, the area of the partition is additional. The corridor area only needs to calculate the sum of the projected area of the natural layer (the projected area of the natural layer is the sum of the areas of all the floors).

Calculating the area of the color steel plate house mainly involves two parts: the wall area and the roof area. Here are the specific steps to calculate:

1.Wall Area Calculation:

Start by measuring the exterior walls of the house and measuring the length and height of the exterior walls.

Multiply the length of the exterior wall by the height of the exterior wall to get the area of each exterior wall.

If the color steel plate house has interior walls, the area of each interior wall is also measured and calculated according to the same method.

Add the area of all exterior and interior walls to get the total area of the wall.

2.Calculation of the area of the pure leaky roof of the house:

Measure the length and width of the roof of your house.

Multiply the length of the roof by the width to get the area of the roof.

3.Result Statistics:

Add the total area of the wall and the area of the roof to get the total area of the color steel plate house.

It should be noted that the calculation method above the nuclear shed is suitable for the common color steel plate house structure, if the shape and structure of the house are more complex, the house can be divided into several simple shape parts for calculation, and finally the part of the area is added to obtain the total area. In addition, if there are other special components in the house (e.g. balconies, etc.), their area needs to be calculated separately and added to the total area.