How does Samsung M2071 factory reset?

To do a factory reset, follow these steps:

Quickly press [Menu] [ ] [Menu] on the control panel, then press [OK], wait for the screen prompt [Data Setup] press [OK], then press the right arrow to find [Clear All Memory] and press [OK] to display [China] and press [OK].

Note: Please back up the information you need to save before resetting the factory settings, and the machine will be restored to factory settings after the eradication is completed.

2.Please use original Samsung toner cartridges for the machine, such as refilling powder or non-original toner cartridges, which may affect the initialization operation.

In advance**Samsung's tested i317m mobile phone complete firmware package + rescue software repair package, there is a specific solution for the tutorial, with a beautiful flashing package**repair package, contact my network disk**link。

Turn off the phone completely, take out the battery for 3 seconds and then put it in, and press and hold the power button + volume down button + home button (the middle physical button) at the same time (long press the power button to power off if the battery cannot be taken). If the operation is correct, the mobile phone screen displays a warning as shown in the figure: (some are in Chinese, with the same meaning).

After that, then press the volume up button to enter the line brush mode, the top shows odin mode, the middle green robot, and the download interface is displayed below. At this time, use a data cable to connect the phone to the computer.

On the Odin3 interface, select "Auto Reboot" and "F.".reset time" to confirm that everything else is unchecked. (The Chinese version checks the repartitioning、Reset time)

Click on phone: select: file starting with modem (again, don't select if you don't have one).

Click csc: select the file name with csc in the file name (look closely, probably in the middle of the file name, if not, the same as above).

Click on the bootloader to swipe the file at the beginning of the kernel (if not, it is the same as above).

Very important, must see) Here to explain, if your ** ROM, after decompressing only one file, such as type, directly PDA to select this one file, or if there is only one file type, the same direct PDA to select this file, special attention, PDA can also be flashed into the kernel, for example, you ** a type of kernel, you can also only choose PDA to flash in)

Then click the Start button on the Odin tool, then it will automatically start flashing the progress bar and start walking, you need to wait patiently for a few minutes, and wait for the Oldin tool to show PASS or ESET. You can unplug the cable now. The phone will be restored to the official original system and will be powered on and used normally.

If you can't enter the robot's mobile phone or flash the mobile phone, ROM firmware, root and KIES updates, and break the boot fixed screen. Mobile phone + exclamation mark + computer does not turn on damaged robot recovery mode. This method can be successfully solved.

If you don't succeed or still fail, don't fool around. Refer to the tutorial to read it carefully before you do it. There is also a auspicious method in the bag.

Reference path for factory reset of Samsung phone: Under the standby page, tap [Applications] - [Settings] - [Reset] - [Factory Reset] - [Reset Device], and tap [Delete All]. After the above operations are completed, the factory settings will be successfully restored after the phone automatically restarts.

1. Open the lid of the printer as shown below.

2. Find the clear button on the panel and press the clear button, as shown below.

3. Then the ballistic frame pops up on the panel, and the toner cartridge is replaced, as shown in the figure below.

4. Find the enable button on the panel and press the enable button, as shown below.

5. Immediately after that, the next step is to adjust the display number to 11, that is, acceptance, as shown in the following figure.

6. Finally, press the OK button, and the clearing is complete.

1. Open the lid of the printer as shown below.

2. Find the clear button on the panel and press the clear button, as shown below.

3. Then the ballistic frame pops up on the panel, and the toner cartridge is replaced, as shown in the figure below.

4. Find the enable button on the panel and press the enable button, as shown below.

5. Immediately after that, the next step is to adjust the display number to 11, that is, acceptance, as shown in the following figure.

6. Finally, press the OK button, and the clearing is complete.

If the printer is replaced with an original Samsung toner cartridge, it can be directly recognized and used after being loaded into the machine, and no operation is required. If you can't recognize the use of the new toner cartridge after replacing it, please make sure whether the toner cartridge is powdered or use a replacement toner cartridge, if so, it is recommended to replace the original Samsung toner cartridge for use, the Samsung printer has no zero operation, and the toner cartridge can be used directly by installing it on the machine.

Then the ballistic box pops up on the panel, and the toner cartridge is replaced, as shown in the following figure.

Find the enable button on the panel and press the enable button, as shown below.

Immediately afterwards, the next step is to adjust the display number to 11, that is, accept, as shown in the figure below, press the OK key, and the clearing is completed.

Here are the steps to factory reset your Samsung M2070:

1.Turn on the printer and press the power button and wait for the printer to fully boot up.

2.Press the "Menu" button on the printer panel.

3.Use the arrow keys to scroll down to the "System Settings" option and press the "OK" button.

4.Use the arrow keys to scroll down to the "Initialize" option and press the "OK" button.

5.Use the arrow keys to scroll down to the "Initialize All Settings" option and press the "OK" button.

6.The printer will prompt you to confirm this action. Press the "OK" button.

7.The printer will begin to reset its factory settings. Wait for the printer to complete the process.

8.The printer will restart automatically. Wait for the printer to start up completely.

9.Once the factory reset is complete, you'll need to reset your printer's network connection and other settings.

Please note that this action will delete all settings and configurations from the printer and restore it to factory settings. So, before you do this, make sure that you have backed up all of your important data and settings.

To factory reset your Samsung M2070 printer, follow the steps below:

1.Turn on the printer and press the "Menu" button.

2.Use the arrow keys to scroll down to the "System Settings" option and press the "OK" button.

3.Use the arrow keys to scroll down to the "Initialize Answer" option, and then press the "OK" button.

4.Use the arrow keys to scroll down to the "Factory Reset" option and press the "OK" button.

5.The printer will prompt you to confirm if you want to do this. Use the arrow keys to scroll down to the "Yes" option and press the "OK" button.

6.The printer will begin to factory reset. It may take a few minutes.

7.Once the printer finishes doing a factory reset, it will reboot and return to its default settings.

Note that this will remove all printer settings and configurations and restore the printer to factory settings. If you have any custom settings or configurations, back them up before doing so.

Summary. Hello dear! If you want to restore factory settings of your Samsung M2071FH printer, you can follow the steps below:

1.Turn on the printer and make sure the printer is on standby. 2.

Press on the printer panel"Menu"button to go to the menu options. 3.Use the up and down arrow buttons to navigate through the menu, find"Settings"or"System settings"option and then press"OK"Button.

4.In the settings menu, use the up and down arrow buttons to find it"Factory reset"or"Reset"option and then press"OK"Button. 5.

You'll be asked to confirm that you want to do a factory reset. Use the up and down arrow buttons to select"Yes", and then press"OK"Button. 6.

The printer will begin a factory reset. During this process, please do not turn off the printer or disconnect the power supply. 7.

When the printer finishes doing a factory reset, it will reboot and restore to factory defaults. Please note that a factory reset will result in all personal settings and configuration data for your printer being erased, including network settings and user-defined options. Before you do this, make sure that you back up any important data that you need to keep.

Kiss the feast! If you want to restore factory settings of your Samsung M2071FH printer, you can follow the steps below:1

Turn on the printer and make sure the printer is on standby. 2.Press on the printer panel"Menu"button to go to the menu options.

3.Use the up and down arrow buttons to navigate through the menu, find"Settings"or"System settings"option and then press"OK"Button. 4.

In the settings menu, use the up and down arrow buttons to find it"Factory reset"or"Reset"option and then press"OK"Button. 5.You'll be asked to confirm that you want to do a factory reset.

Use the up and down arrow buttons to select"Yes", and then press"OK"Button. 6.The printer will begin a factory reset.

During this process, please do not turn off the printer or disconnect the power supply. Xiangshan 7When the printer finishes cracking into a factory reset, it will reboot and revert to factory defaults.

Please note that a factory reset will result in all personal settings and configuration data for your printer being erased, including network settings and user-defined options. Before you do this, make sure that you back up any important data that you need to keep.

Please refer to the above information for you to find it helpful.

Hello! To restore your Samsung M2071FH printer to factory settings, you can follow the steps below:1

First, make sure that printing is turned on. 2.On the printer's control panel, find and press the "Menu" button to go to menu option 3

Use the up or down arrow keys to navigate to the "Settings" option and press the "OK" button to enter the settings menu. 4.In the Settings menu, use the arrow keys to navigate to the "System Settings" option and press the "OK" button again

In the system settings menu, use the arrow keys to navigate to the "Factory Reset" option and press the "OK" button...The printer will display a confirmation dialog asking you to be sure you want to factory reset your settings. Use the arrow keys to select the "Yes" option and press the "" button.

7.The printer will start to perform a factory reset, please wait patiently until the printing is complete and the operation is restarted. Note that factory reset will erase all settings and configurations and restore the printer to its original state.

Before you do this, make sure that you have backed up any important settings or files. Hope you find the above information helpful! If you still have questions about Kyungchong, please feel free to ask.