ASUS computers show that the Asus Support Device cannot be started in the mouse properties and is up

It is recommended to install the chipset driver and touchpad driver of the corresponding system version of the corresponding model on the official website of ASUS**, if not, it is recommended to reset the system or contact the local official after-sales service center for processing.

1.The Win10 reset method is as follows:

Click on the Start menu and select Settings > Update & Security > Recovery > Reset your PC, plugging it in and not shutting it down.

If you have important data before reset, it is recommended to back up the data to an external device.

If the touchpad is available under the BIOS and cannot be used under the system, first check whether the touchpad is turned off, and secondly, you can install and restart the touchpad driver on the ASUS official website according to the computer model**, and then restore the system (you need to back up the data before restoring the system). None of the above can be solved, and it is recommended to go to the local ASUS official after-sales service for inspection and maintenance.

There are three main reasons for the blue screen of win10 system update failure: 1. The key files of the system are corrupted; 2. The system driver is replaced, resulting in incompatibility; 3. The official upgrade server is unstable.

Restart your computer until Windows fails to start. The reason may be that the interface of the hardware or software has recently changed. Press Enter.

Enter the Windows Startup Manager interface. Press the F8 key to enter the advanced startup item. Select below"Disable driver signature enforcement"and press Enter.

Dear ASUS users, Hello!

Windows fails to boot due to system file problems that need to be resolved by restoring or reinstalling the system;

1. Try to press the F8 key at boot, or shift+F8 advanced startup items to select [Safe Mode], and try to restore the system to the state before the abnormality in safe mode, the operation mode is "Start - All Programs - Accessories - System Tools - System Restore";

Or in safe mode, uninstall and delete recently installed programs, software, or patches.

2. If it still doesn't work, it is recommended that you back up your important data to a USB flash drive or mobile hard disk, and then restore or reinstall the system to solve the problem.

If the machine is pre-installed with win7 or win8 system, that is, there is a win7 or win8 system label at the bottom of the machine, you can press f9 to restore the system with one click.

The reason is a sign problem with the driver, I guess you should have installed the driver wizard or Kingsoft poison on your computer.

The win7 system has been useless for a long time.,I can't give you detailed guidance.,Briefly tell you.。

You look for the startup settings in this page, and then restart, after the restart, select "Disable Driver Mandatory Signing" to open, and then after booting, find this file (the storage location is the one shown), delete it and it's OK.

1. Reason 1 - The trackpad is not enabled.

1. Click the [Start] menu, select Control Panel, and then select [Hardware & Sound] in the Control Panel;

2. In the [Hardware & Sound] operation interface, click to select the [Mouse] option;

3. In the mouse properties, if the trackpad driver is installed correctly, you can see the trackpad tab of the brand to which it belongs, if I am elan, click to enable the device, you can start the trackpad and resume normal use.

Reason 2 – Trackpad part of the function is disabled.

1. In the same way, enter the mouse properties dialog box, click Options, enter the touchpad settings interface, you can also find the trackpad icon in the icon, and double-click to enter.

2. Check the relevant operations of the trackpad as enabled, if you don't know which ones are enabled, you can directly restore it to the default value, so that the trackpad can operate normally.

Reason 3 – Whether the touchpad function is locked or not is turned off.

1. The touchpad of the notebook can be controlled by the combination of keys of the keyboard to close or open, check whether the notebook touchpad is turned off, and reopen it, generally fn+f6, different brands of notebooks will be different!

Reason 4--- The driver is not installed.

1. If the driver is not installed, it will directly cause the trackpad to not be used normally, you can enter the device manager to view, and you can find the trackpad here in the mouse and its pointer device to see if there is any abnormality, and you can also check it with the help of third-party software.

Cause 5 – Viral cause.

1. A virus in the computer will also cause the trackpad to not be used normally, use anti-virus software to scan the computer completely, and no suspicious virus is detected.

Reason 6 – Hardware issues.

1. If the above reasons are ruled out, then there is basically only a hardware problem, such as water ingress, internal foreign objects causing damage to the touch board, etc., if you have the ability, you can disassemble the machine for inspection, or send it for after-sales maintenance!

Touchpad Touchpad (TouchPad or TrackPad), is an input device that is widely used on laptops. It senses the movement of the user's finger to control the movement of the pointer.

The touchpad can be thought of as a replacement for a mouse. Touchpads can also be found on some other portable devices, such as personal digital assistants and some portable AV devices. Due to design limitations, touchpads are usually no larger than 20 square centimeters.

Apple's MacBook Pro is equipped with a multi-touch trackpad that can be used for gestures such as zooming in and out of the display, as well as for handwriting input. It makes use of Apple's multi-touch technology. The technology was first developed and patented by Fingerworks (a small San Francisco company that was later acquired by Apple) and was first used on the iPhone.

The new system settings are different from the original, causing the touchpad to be turned off by the system by default, or the driving reason, the solution is as follows:

3.When you disable or enable it in both ways, a graphical prompt will appear on the system desktop.

Method 21Move your mouse over the upper-right corner of the desktop and select Settings.

2.Select Change PC settings in the lower-right corner.

3.Once you're in the computer settings screen, select "Computers & Devices".

4.Go ahead and select "Mouse & Touchpad".

5.On the right side, you can see the switch options about the touchpad, as shown in the following figure (Note: the touchpad set by this option cannot be turned on by the shortcut function after being turned off, and needs to be turned on by an external mouse).

If neither of the above methods is applicable, there may be a problem with the computer hardware and you need to go to the repair office for repair.

Click the right mouse button on my computer,Properties,Computer Management,Disk Manager,You can see the disk and divide it into the list,In general, if there is a list in the list, it means that the system has identified the disk,Can you use it to open it from the disk list to try it。

When you can enter the system normally, enter the control panel, in the Windows operation center, remove the check box of Windows UPDATA, and update it with 360 or QQ Butler program, one is that the situation in the figure will not be inconvenient, and the other is that the probability of problems is reduced.

If the boot blue screen does not appear often, try to turn it off at boot. If it still doesn't, press f8 to get the advanced option to let go and find the latest correct configuration "Enter to repair, and press f8 to enter the safe mode to restore the system or reinstall the system (or see the article below). If it is caused by a hardware issue, discharge the BIOS battery (restore).

Martian) 3339

Press the F8 key to select the safe mode before entering the win boot menu, turn off the Windows automatic update after entering the system, restart, if you can't enter, also press F8 to select the last correct configuration to try.

The computer ASUS notebook win10 operating system, can not boot, press f8 can not enter the safe mode is due to the computer in the trojan virus guide.

The specific operation steps are as follows:

1.First restart the computer, when the boot screen appears, use the boot shortcut key to guide the USB flash drive to start into the main menu interface of the Chinese cabbage, and choose to run the Chinese cabbage win8pe anti-blue screen version (new computer) Enter to confirm.

2.When you come to the PE system desktop, the system will automatically pop up the Chinese cabbage PE one-click installation tool, click the browse button to browse the win10 system image package stored in the Chinese cabbage U disk in advance.

3.In the pop-up opening window, open the WIN system image package stored in the Chinese cabbage USB flash drive.

4.Then specify a disk as the win10 system installation disk, and click OK.

5.Click OK in the pop-up prompt window and wait patiently for the system restore process.

6.Once the restore is complete, the system automatically reboots and then completes the installation process automatically.

7.Finally the computer is ready to use.

1. When the power is off, press the power button.

DU boot on, wait until the logo appears in zhi (below), then DAO long press the power button to force a shutdown;

2. After multi-capacity restart and forced shutdown, click "Advanced Options" until the "Auto-Repair Interface" appears;

3. Select "Troubleshooting";

4. In the "Troubleshooter" interface, select "Recover from Drive";

5. Select "Delete my files only";

6. Understand the prompt information on the screen, and after selecting Recover, all the original system and the original data will be erased.

7. The next steps until the system recovery is completed are carried out automatically, and the interface for initialization under the system, wait for the system installation to be completed to enter the system.

8. After the installation is completed, you can enter the computer system.

If you find that the entire system of your laptop is faulty or suspected to be faulty, it is recommended that you send the entire computer to ASUS.

The official after-sales service center is fully inspected by a professional maintenance engineer to confirm the fault and necessary repairs. The whole machine maintenance, cleaning and upgrading of the brand computer is best done at the official after-sales point of the corresponding brand, and the official after-sales service is used to use the original parts, and the maintenance skills and specifications of the engineer are definitely more formal and assured, which can ensure the quality of maintenance.

The official after-sales service center of ASUS can be found in the following sections of the official website:

This indicates that something is wrong with the system and that you can go into safe mode in another way.

1. When the computer boots up, pressing "F8" cannot display the boot menu normally, so that you cannot enter the "safe mode" interface, you can try to press the "CTRL" key to open the system boot menu when the computer is turned on.

2. Then in the Windows desktop, open the "Run" window, enter the "MSconfig" command, and click Confirm to enter the system configuration policy interface.

3. From the [System Configuration] interface that opens, switch to the [Boot] tab, and check the two items of [Secure Boot] and [Minimize].

4. From the [System Configuration] interface that opens, switch to the [Boot] tab, and check the two items [Safe Boot] and [Minimize] to enter the safe mode normally.

1. Press the shortcut key "win+r" or right-click the start menu button and select [Run] to open the run window.

2. Enter the command msconfig in the pop-up window.

3. Enter the system configuration interface and switch to the boot tab.

4. Check the safe boot (f) under the boot option, and then it will prompt you to restart, click.

5. After clicking, the system prompts to restart, and it will automatically enter the safe mode.

Check the manual to see how to enter recovery mode, or contact customer service.

Unable to boot the computer properly, error**0xc0000001 This condition indicates that the file system or drivers are causing the computer to screen up.

1. First of all, let's test from the driving aspect. Force shutdown 3 times in a row, then the interface appears, select Advanced Settings, then select Incurable Diseases, select Advanced Options, and then tap Start Settings. Then select Safe Mode.

Go into safe mode, uninstall the recently installed program or driver, and restart your computer.

2. System files, you can use the system USB flash drive, go to install the system interface, click Repair System, and then re-enter the system.

3. If it still doesn't work to reinstall the system, you can reinstall the system.

Press F8 immediately after booting up, and then let go when the advanced options appear, and select "The latest correct configuration" Enter to repair.

Error 0xc0000001 is a sign that there is a problem with the driver.

Reinstall System Method:

2. The license agreement appears, check the "I accept the license terms" checkbox, click "Next", select the installation type, if the system crashes and reinstalls the system, please click "Custom"; If you want to upgrade from XP or Vista to Win7, please click "Upgrade";

3. Select the installation disk. Click on the "Advanced" option in the diagram to partition it;

4. Click "Next" in the above figure, and the following interface will appear.

5. After the installation is completed, restart the system service.