What should I do if the vivo phone is hot and can t be turned on

Causes and solutions:

1. Viruses in mobile phones.

Solution: Double clearing is fine.

2. The brightness of the mobile phone screen is too high, and the lock screen of the mobile phone screen is not set reasonably, which will also cause the mobile phone to consume power and heat. In addition, after the screen is lit, some programs will run with high consumption, which is also a reason for the heating of the mobile phone.

Solution: Adjust the screen brightness to the appropriate level, adjust the lock screen time, and turn off the high-power programs in time.

3. In the case of poor network signal, the mobile phone needs to consume more power than when the signal is good to ensure communication, which will cause the temperature of the mobile phone to rise. At the same time, some software needs to constantly monitor your network connection status, and the monitoring of these network connection status will also cause the mobile phone to consume power and heat up. And if you happen to have a bad signal and switch between 3G and 2G frequently, then it will cause the temperature of the mobile phone to rise.

Solution: Use wireless network instead if the signal is not good, use only 2G or 3G network, or turn off the mobile phone network connection.

4. The mobile phone software is detected and installed in the background, which will cause the CPU to be abnormal. The abnormally high CPU will also cause the mobile phone to cost electricity and heat up.

Solution: When installing new mobile phone software, you can temporarily close other power-hungry software to reduce the CPU load.

5. The mobile phone is hot and cannot be turned on. If the phone is turned off in high temperature and cannot be turned on, you can wait for the phone to cool down and try to turn it on, if it still cannot be turned on, it is recommended to go directly to the after-sales service.

Ways to avoid your phone getting hot:

1.Avoid playing games, watching movies, or talking on the phone while charging.

2.Avoid long calls with your phone close to your cheek and try to use earpiece headphones.

3.Close backgrounders that you are not using.

4.Avoid using cases that don't heat well or remove them when it's hot.

6.If the phone is hot, using the phone cleaning software to clean up the memory will effectively cool down.

7.When charging, use is temporarily stopped to prevent danger.

8.Holding it in your hand or putting it in your pocket will transfer heat to each other, try to put it in the other side of ventilation and heat dissipation, and let the phone blow cold together if there is an air conditioner.

1. Confirm whether the battery of the mobile phone is sufficient, and connect the mobile phone to the power supply to charge for a period of time before trying to turn on the operation.

2. Press and hold the power button for 10s to try to restart the phone.

3. Press and hold the lock screen key and the volume plus key at the same time to try to enter recovery mode, if you can enter, select reboot system now to restart the phone (select "restart" for Chinese recovery).

If the above methods cannot solve your problem, please bring the purchase invoice, warranty card and mobile phone to the nearest vivo after-sales service center for professional engineers to test and deal with it for you.

Note: If the heating of the mobile phone is too severe, the mobile phone may automatically shut down under the condition of self-protection.

What should I do if my phone heats up and consumes power quickly? Let's take a look.

Dial Mi Well Mi Well 112 Well Mi Well Mi Mi.

What should I do if my phone heats up and consumes power quickly? Let's take a look.

Wrap the back cover with wet wipes and turn on the air conditioner, which should not heat too badly.

1. Many applications will continue to run in the background after clicking to exit, so you can clean up and speed up the phone through the phone management software, turn off the useless software running in the background, and release the memory of the phone.

2. If the mobile phone is infected with viruses and Trojans, it will also affect the running speed of the mobile phone and cause the mobile phone to heat up.

In addition, China.com suggests that if you want to keep your mobile phone from heating up, you should also develop a good habit of using your mobile phone, such as not using your mobile phone for a long time in a place with a high ambient temperature, especially not running 3D games and other software that consumes too much mobile phone memory;

When you feel that the temperature of the mobile phone is high, you should turn off the running software as much as possible, and at the same time, you can also remove the mobile phone case, etc., so that the mobile phone can better dissipate heat; When choosing a phone case, try to choose a phone case with a lighter color and better air permeability.

The reason why the phone is hot

1. When the mobile phone is charging, the power conversion circuit will produce power consumption, resulting in the heating of the mobile phone.

3. If you use the mobile phone in a place with a high ambient temperature, the heat generated inside the mobile phone will not be able to dissipate.

4. In order to protect the mobile phone or make the mobile phone more beautiful, many people like to give the mobile phone a phone case, but some mobile phone cases have a bad heat dissipation function, which will make the mobile phone more likely to heat up.

The above content reference: People's Daily Online - The better the performance, the easier the mobile phone is to heat? Teach you a few tricks to the mobile phone to "cool down and extinguish the fire."

Answer: Hello, vivo mobile phone charging will be hot because of the energy conversion and internal resistance consumption of the mobile phone, resulting in heat, resulting in hot heat. Some mobile phone models are equipped with flash charging function, which may cause charging heat to a certain extent while increasing the power output of the charger and shortening the charging time. It is normal for vivo mobile phones to get hot when charging, but at the same time, you need to pay attention to whether you are using the original charger, not the original charger will cause severe heat or other conditions due to different working currents and voltages; Long-term use of the battery will also lead to aging, which will damage and cause heat and heat during charging.

There are two ways to relieve the heat of your phone while charging

1. Try to avoid playing with the mobile phone while charging, especially playing games, which will cause the mobile phone CPU to run too frequently, causing the mobile phone battery and screen part to heat up.

2. When charging, the mobile phone should be placed in a ventilated place, and should not be placed in a series of places with poor heat dissipation, such as blankets and clothes.

Question: Is the battery broken?

The question is that the charging is very serious, and if you don't play it, you will be very hot, that is, the charging is very serious, and if you don't play it, you will be very hot, and now you don't play with the phone and put it on the power consumption is also very fast, and the answer is that the battery problem, it is recommended to change the original battery.

Question: How much does it cost to change a battery for vivos6.

Answer: If you are using a vivo mobile phone, when the mobile phone is running a game, the processor in the fuselage runs at high speed, and the screen, speaker, wifi and other devices work for a long time, and the power consumption is relatively large, resulting in an increase in heat generation, which is a common heating phenomenon. When the ambient temperature is high, such as in the outdoor environment in summer, especially in direct sunlight or high temperature environment, the heat dissipation of the mobile phone will be slower, and the heat sensation will be more obvious.

The network speed is faster, the power consumption is larger, and the operating power consumption of the software itself will increase the heat generated, and the temperature on the surface of the mobile phone will also increase due to the higher temperature in summer. If you are using a 5G model, it is recommended that you try to turn off the 5G network to reduce the heat, operation method: go to Settings - Mobile Network or Dual SIM and Mobile Network - click on the corresponding SIM card - enable 5G - turn off the switch;

2. Appropriately reduce the resolution and frame rate of game special effects in the game settings, the higher the resolution of the game special effect frame rate, the higher the operating power consumption, thereby increasing the heat generation;

3. If you are wearing a protective case, remove the protective case when playing games to improve the heat dissipation of the mobile phone;

4. Use in a room temperature environment, avoid direct sunlight or high temperature environment;

5. Clean up the background program, play games for a long time and rest for a while;

6. Try to avoid playing games while charging, as playing games while charging will aggravate the heating of the phone;

7. Try to play games in a place with a good signal, the poor signal will increase the strength of the mobile phone's transmission and reception signal, resulting in increased power consumption and heating;

8. Reduce the screen brightness appropriately or turn on the automatic screen brightness function, high brightness will increase the heat.

What should I do if my phone heats up and consumes power quickly? Let's take a look.

Landlord, Android smartphone.

Heating is a normal phenomenon for Apple phones.

Playing for a long time.

The same fever.

When it gets hot, it's overheated.

It is recommended that the landlord let the machine.

Take a break to prevent overheating.

Fever solution:

1. Reduce the power consumption of program running: enter i Butler - mobile phone cooling - one-key cooling, or open the control center, click "one-key acceleration", and often clean up the background program;

2. Turn on power-saving mode: Enter Settings - Battery, turn on "Low Power Mode", the system will intelligently adjust the CPU (processor) frequency, screen brightness and lock screen time, which can reduce the power consumption of the mobile phone, reduce power consumption and heating;

3. Try to avoid using mobile phones when charging: There is an energy conversion process in mobile phone charging, during which a certain amount of heat will be generated. Using the phone during charging will increase the operating power consumption, resulting in an increase in heat;

4. Appropriate rest in high-power scenarios: In scenarios such as playing games, brushing short**, live broadcasting, etc., functions such as CPU (processor), screen, and wifi continue to run, which will generate a certain amount of heat, and hold the mobile phone in the palm for a long time, and the surface of the fuselage is not well dissipated.

5. Choose the right protective shell: choose a protective shell that is light and easy to breathe, such as the original protective shell, and try to avoid choosing a protective shell that is not easy to dissipate heat such as leather and metal materials. When the phone is charging or the temperature is high, you can remove the protective case and leave the phone screen off for a period of time;

6. Try to avoid being in a high temperature environment for a long time: In a high temperature or direct sunlight environment, due to the high ambient temperature, the heat dissipation of the mobile phone will be slowed down, and try to use the mobile phone in a room temperature environment to reduce the heating of the mobile phone.

1.Make sure that the battery of your phone is sufficient, and then connect your phone to a power source to charge it for a period of time before trying to turn it on. 2.

Press and hold the power button (for full screens, press and hold the "lock button" and "volume down button" at the same time) for 30 seconds to try to restart the phone. 3.You can press and hold the "Power Button" and "Volume + Button" at the same time to try to enter the recovery mode, select "Clear Data" first, and then select "Restart" after the interface jumps.

Questions. Can't get into mode.

It may be that there is a problem with the system, or a problem with the battery, it is recommended to go to the official website for maintenance and quality inspection.

Questions. Is there any other way?

At present, it is gone, you can charge the phone and try again, if it doesn't work, it is really a problem with the quality of the phone.

Questions. Ok thanks!

It's okay and I wish you a great day.

It means that there is a problem inside the phone, so let's fix it.

If the mobile phone is hot and cannot be turned on, it is recommended to wait for the mobile phone to cool down, and then deal with it according to the following scenarios:

Scenario 1: The screen does not turn on when the device is turned on, and the device does not vibrate or react.

Check whether the battery is sufficient, charge the device for more than half an hour, and try to turn it on again;

If the device gets stuck, dropped, or liquid ingress, please take the device to a service center for further service.

Scenario 2: When the power button is pressed to turn on or force restart (press and hold the power button and volume down button at the same time for more than 10 seconds), the device vibrates and the screen does not display.

If the device vibrates but the screen is still black, it is more likely that the screen is faulty, please bring the device to the service center for further maintenance.

Scenario 3: When the computer is turned on, the screen is displayed and cannot enter the desktop.

Force restart the device to try to resume use, operation method: Press and hold the power button and the volume down button at the same time for more than 10 seconds (NEX 3, NEX 3s press and hold the top circle button for more than 10 seconds).

Try to repair the system through the "System Repair Mode".

Operation: When the device is powered off or restarted, press and hold the Power button and Volume Up button 3 for 10 seconds before the screen turns on, until the screen displays the word fastboot and then release the button.

Press the volume down button to move the cursor to "Enter Recovery", press the power button to confirm the entry, until the screen displays the word recovery, and the device has entered recovery mode.

In the recovery mode interface, select "Install System Software", and then select "Update the latest version online", and repair the system according to the prompts.

If the above methods do not solve the problem, it is recommended to bring your mobile phone to a nearby service center.

Get help. <>