After passing the 2017 Level 2 Constructor Exam, what preparations are required to obtain the certif

Notice on the implementation of the electronic service of the certificate of qualification of the second-level construction engineer in Jiangsu Province.

1. Fully implement the electronic service of "Jiangsu Province Secondary Construction Engineer Qualification Certificate (including Supplements)" (hereinafter referred to as the "Achievement Certificate"). 15 working days after the results of the second-level construction engineer qualification examination are announced, the qualified personnel can print their "Result Qualification Certificate" on the Internet**, and the "Result Qualification Certificate" has the same effect as the "Jiangsu Province Second-level Construction Engineer Qualification Certificate". Paper qualifications will no longer be issued separately.

2. The "Certificate of Achievement" shall be issued by the Provincial Personnel Examination Center in an electronic form.

The time for receiving the certificate of qualification of the second-level constructor in each province is different, and the certificate is generally handled and received three months after the provincial score. After passing the second-level construction examination, candidates are requested to bring relevant materials to each registration point to apply for the second-level construction engineer qualification certificate.

1. How to get it:

1· Individuals can collect their valid ID cards and other relevant materials.

2· Others (Shan Laoqin) on behalf of the representative, with the valid identity of the representative and the holder of the certificate, the original copy of the missing certificate was searched.

2. Carrying information:

1· The original ID card of the candidate.

2· Original graduation certificate and admission ticket.

4· 1 2-inch **, 3 1-inch**, at least one with the same bottom version as the admission ticket**.

Individual certificate: Collect the original Bu nationality hunger document or transcript with your valid ID card (the transcript can be printed directly when checking the type and returning the results).

Collect on behalf of others (units): with the original valid ID card of the representative and the holder of the Suimin witness (some provinces prohibit others from collecting on behalf of others).

Hello know netizens! You asked this, I don't know if you have an on-site audit or a post-on-site audit, if the audit has passed, hold a valid certificate such as an ID card to rent a direct go, If you still have any questions that you don't understand, you are welcome to continue to ask, I hope to help you!

Initial registration process for Constructor II.

1. The initial registration application form of registered constructors, a summary table (an additional one-inch color photo shall be attached to the application form) and the corresponding electronic documents (the electronic documents shall be sent to the provincial registration authority through the Internet);

2. Copies of the applicant's qualification certificates, academic certificates and identity certificates;

3. A copy of the employment labor contract signed between the applicant and the employing unit;

4. A copy of the qualification certificate of the employing unit;

5. If you apply for initial registration and apply for multi-professional registration at the same time, you should also submit the original and copy of the certificate of passing the professional category examination of registered constructors;

7. If you apply for initial registration with the qualification certificate of the second-class registered construction engineer issued by other provinces (municipalities), you shall submit the certificate of non-registration issued by the provincial registration management department of the province.

Issuance of certificates.

Continuing education is also required to obtain the certificate. Continuing education is divided into compulsory and elective courses, each of which is 60 hours during the validity period of each registration. If the continuing education reaches the qualification standard, a continuing education certificate will be issued.

The registration certificate and practice seal are valid for 3 years, and the application for renewal of registration should be made after the expiration of 3 years. Continuing education can be attended once within 3 years and passed the examination, and the general construction administrative department should be held once a year, and you can pay attention to the notice on the official website of the local construction administrative department (Housing and Urban-Rural Development Department).

Where it is necessary to continue practicing after the expiration of the validity period of registration, an application for renewal of registration shall be made in accordance with the provisions of Articles 7 and 8 30 days before the expiration of the validity period of the registration. If the registration is renewed, it will be valid for 3 years.

Where an application is made for renewal of registration, the following materials shall be submitted:

1) Application Form for Renewal of Registration of Registered Constructors;

2) Original registration certificate;

3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;

4) Proof that the applicant has met the requirements for continuing education within the validity period of registration.

How to receive the certificate of second-level constructor

Individual collection: Collect the certificate with your original valid ID card or transcript (the transcript can be printed directly when checking the results).

Collect on behalf of others (units): with the original valid ID card of the representative and the holder (some provinces prohibit others from collecting the certificate on behalf of others, and the original ID card (passport or driver's license) must be presented to collect the information, a two-inch bareheaded certificate**, and the original admission ticket. If the collection is made on behalf of the applicant, the representative must present the original ID card and the documents required above.

Precautions for certificate collection:

1. If there are a large number of units, please try to receive them on behalf of the personnel department of the unit (with the official seal of the unit), please check and write down the registration number of all employees and arrange them in order from small to large;

2. If you come to collect the transcript, please bring the admission ticket, if the admission ticket has been lost, please bring your ID card and your registration number;

3. To collect the transcript on behalf of others, you need to bring the admission ticket or ID card of the other person;

4. All candidates who have taken the exam (except for absenteeism, discipline and zero scores) will have a transcript.

If it is a province that has a post-examination audit, you must participate in the audit at the specified time, and only after passing the examination can you pass the exam, and you can wait for the certificate!

Check the results, wait for the notice of the qualification standard, confirm that it has been passed, apply for the certificate (some provinces can receive the electronic version), and the paper version of the certificate will be registered by the work unit after receiving it.

1) On-site certificate collection:

Individual collection: Present your original valid ID card, two-inch bareheaded certificate**, original admission ticket, and transcript to collect.

2) Collect on behalf of others (units): with the original valid ID card of the representative and the holder (some provinces prohibit others from collecting on behalf of others).

The specific requirements for obtaining the certificate are subject to the requirements of the notice of obtaining the certificate in various places.

2) Electronic Certificates:

In order to simplify the process of public service, more and more provinces no longer issue paper certificates, and begin to implement the electronic qualification certificate of secondary construction engineers. It is expected that more provinces will implement the electronic certificate of qualification of second-level constructors in the future

If it is a province that requires post-examination review, the results will be reviewed after passing, and then wait for the notice to collect the certificate, and finally register to practice; If it is a pre-test review, after the results are passed, you can wait for the certificate to be collected and then register for use.

Generally, it will be about half a year.

How to collect the certificate.

After passing the second-level constructor examination, you can bring the relevant materials to the designated place to apply for the second-level constructor score certificate.

Individual collection: Collect the certificate with your original valid ID card or transcript (the transcript can be printed directly when checking the results).

Collect on behalf of others (units): with the original valid ID card of the representative and the holder (some provinces prohibit others from collecting on behalf of others);

In some areas, it can be picked up by mail.

Note: In addition, some provinces implement electronic certificates, and candidates can print the electronic version of the second-level constructor score certificate online about half a month after the result inquiry, which has the same effect as the paper version of the certificate.

Constructor II can receive the certificate in the following ways:Those who pass the second-level constructor examination can receive the second-level constructor qualification certificate after the examination, and the second-level constructor qualification certificate is collected by the provincial housing and urban-rural development department or the personnel examination center. At the same time, the on-site collection of the second-level constructor is divided into three types: individual collection, collection by others and unit collection.

You need to bring relevant materials for on-site pick-up.

Introduction to the second construction professional qualification:Persons who have obtained the construction qualification certificate and meet the registration requirements must be registered before they can practice in the name of a builder. The Ministry of Construction or its authorized agency is the registration authority for the professional qualification of Class 1 constructors; The construction administrative departments of all provinces, autonomous regions and municipalities directly under the Central Government shall formulate the registration measures for the professional qualifications of secondary construction engineers within their respective administrative areas, and report to the Ministry of Construction or its authorized agencies for the record.

Applicants who are approved for registration will be awarded the "Registration Certificate of the People's Republic of China for Class 1 Constructors" and "Registration Certificate for Class 2 Constructors of the People's Republic of China" respectively. Registered builders are required to undergo continuing education to refresh their knowledge and continuously improve their business. The validity period of the registration is generally 3 years, and the renewal of the registration must be completed 3 months before the expiration.

The above content refers to Encyclopedia - Level 2 Constructor Certificate.

After passing the second-level construction engineer examination, you can receive the certificate, which is divided into electronic certificate and paper certificate, and the paper certificate collection methods include on-site collection and mail collection. The method of obtaining the electronic certificate is to print it by yourself, and the electronic certificate of the second construction has the same legal benefits as the paper certificate.

After passing the second-level constructor examination, the way to obtain the certificate includes on-site collection, mail collection, and self-printing, and the second-level constructor certificate includes electronic certificates and paper certificates, electronic certificates can only be printed by themselves, and paper certificates can be collected on-site or by mail.

Second-level constructor certification materials:

In person: original ID card;

Collection by others: the original ID card of the representative, a copy of the candidate's ID card, and a power of attorney signed by the candidate.

The Class II Constructor Certificate implements a registered practice management system, and those who have obtained the Class II Constructor Certificate need to register before they can practice in the name of Class II Constructor.

Initial registration materials for the second construction certificate:

1) Application Form for Initial Registration of Registered Constructors;

2) Copies of qualification certificates, academic certificates and identity certificates;

3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;

4) If the application for initial registration is overdue, the supporting materials for meeting the requirements for continuing education shall be provided.

Tips: Due to the continuous change and adjustment of the examination policy and content, the above information provided by this ** is for reference only, if there is any objection, please refer to the content published by the authoritative department! 2017 Second Construction Mechanical and Electrical Past Questions and Answers**.

Format: PDF Size:

If you have any questions about the qualification exam, don't know how to take the test center, and don't know the local policy for the exam, click on the bottom to consult the Liekao website and get the review materials for free.

Before obtaining the certificate, the second-level constructor needs to prepare the relevant materials for obtaining the certificate, familiarize themselves with the certification process in advance, carefully read the notice and precautions issued by the local examination center, and go to the designated place to collect the qualification certificate within the specified time.

Before the start of the certification process, the local examination center will release a list of qualified personnel for the second-level constructor, and the personnel in the list can go to the designated place to collect the certificate of the second-level constructor examination within the specified time according to the certificate collection notice.

The method of obtaining the certificate and the materials required for the second-level construction section of Sun Zaoshi.

Collection method: Individual collection: Collect with your original valid ID card or transcript (transcript can be printed directly when checking the results).

Collect on behalf of others (units): with the original valid ID card of the representative and the holder (some provinces prohibit others from collecting on behalf of others);

Documents required for obtaining the certificate:

The original ID card (passport or driver's license), the original admission ticket, 1 two-inch bareheaded certificate and other materials will receive the second-level construction engineer qualification certificate. If the collection is made on behalf of the applicant, the representative must present the original ID card and the documents required above.

Tips: Due to the continuous change and adjustment of the examination policy and content, the above information provided by this ** is for reference only, if there is any objection, please refer to the content published by the authoritative department! 2014 Second Construction Practice Questions and Answers**.

Format: PDF Size:

If you have any questions about the qualification exam, don't know how to take the test center, and don't know the local policy of applying for the exam, click on the bottom to consult the liekao network and get the review materials for free.