Why is my 7p boot slow at least 40 seconds to turn on

The battery is low.

If this is the case, you will have to wait a while to turn it on, even after charging it when it is plugged in. So don't worry at this time, as long as the charge reaches 5%, it can be turned on and used normally.

Temporary system failure.

Sometimes you will encounter a sudden black screen on your phone, which may be due to the poor compatibility between some software and the system, or the user has upgraded some beta firmware. If you encounter a black screen, no matter what button you press, there is no response, we can press and hold the "power and home" button of the Apple 7 at the same time for more than 5 seconds, and you can force it to shut down. Then we press the power button again to turn it on, and that's it.

Hardware failure. If it is a hardware failure, then you need to find a local Apple after-sales inspection machine.

Activation tutorial: Insert the card and start pressing the power button on the right side of the front of the phone to turn it on.

After waiting for the initial boot of the system, you will enter the welcome screen of the activated phone, starting from swiping to unlock.

Since during the activation process, the mobile phone needs to connect to the network to communicate with the Apple server, and it can only be activated after confirmation, so the network needs to be used. Of course, if your current mobile phone has a 3G or 4G network, you don't need to choose a wireless network, and then click the "Next" button.

This is followed by the selection of some phone accessibility features, such as the "Location Services" function in the figure below, and the general recommendation is to choose to enable it.

Next, we will be asked if we want to enter it.

Then we are prompted if we want to enter a password, and again, we can create a password or not.

And then down is for example.

icloud、touch

When everything is set up, you will see the welcome screen in Chinese, which means that the activation has been successful.

Listen to my method 4 try.

System acceleration and network acceleration in boot acceleration will optimize your computer systematically and comprehensively. In the specific boot acceleration function, Tencent PC Manager will scan the programs that the system will automatically start when it is booted, and can clean up unnecessary startup items to save the waiting time of the system boot process.

Is it because you've been upgrading the system?

There are too many phone installers.

Check whether there is too much software installed on the phone, and you can delete some software that is not commonly used or has conflicts, so that the speed will be faster;

Afrari caches too much.

Frequent use of Safari to browse the web for a long time will generate a lot of cache data, and you need to empty the cache of Safari to keep it running smoothly. To clear Safari cache, users need to go to [Settings] > [Safari], and then click "Clear History" and "Clear Cookies and Data";

SMS sessions occupy memory.

A large number of text messages are also one of the reasons for slowing down the speed of the phone, sometimes there are too many text messages, and when you open the Messages app, you have to get stuck and wait for a while before you can enter. Users can try to delete those meaningless spam messages in their mobile phones;

There are too many slave programs installed.

So the start is slow.

Too much junk and too many background programs will be slow.

If you don't understand, don't reply randomly.

It takes 4 minutes for my 7p to boot up, what a re-update the system and restore the factory settings are the same, it doesn't work! What rubbish!

There are many reasons why your computer can get stuck and slow down

1. The computer memory is not enough, and if you don't clean up the cache of the computer, it will make more and more junk files, which will cause the computer to be very stuck, and the solution is very simple, use Tencent Computer Manager to clean it up.

2. The network is too slow, if the broadband is too small, it will be very slow and stuck. It would be nice to upgrade your broadband.

3. There is a virus in the computer. Once the computer is poisoned, it will affect the running speed of the system and make the computer very stuck, so it is necessary to use the computer manager to disinfect the computer from time to time.

4. If the software is incompatible, uninstall the incompatible software.

5. Check your broadband first if you are slow to surf the Internet, and upgrading your broadband can make the network speed change faster. If the broadband network is slow enough, you can check if it is rubbed.

The computer takes a long time to boot up, responds slowly, and is difficult to enter the desktop, which is due to a variety of reasons: 1. Hardware problems: (1) Insufficient memory:

If the entry speed was not slow before, but now it is slow, and there are two memories, it may be that one memory is faulty, check whether the memory capacity is consistent with the original configuration after entering the system, and if it is reduced, find out the damaged memory and replace it; If it was slow in the past, it may be due to insufficient memory, and you need to add memory of the same brand and model as the original memory or replace it with large-capacity memory. (2) Network connection failure: If there is a problem with the network settings, it may cause the system to automatically search for the IP address to slow down, which will also affect the boot speed.

If so, you'll need to check and make sure your network settings are working and set your local connection to a fixed static IP address. (3) Fragmentation or bad sectors of the hard disk: It is recommended to use the boot USB flash drive to start the computer, and use special tools such as diskgen to detect and repair the hard disk under the PE system.

4) Power-on self-test time is too long: You need to quickly press the DEL key (F2 or other hotkeys for notebooks) to enter the CMOS setting menu when powering on, and turn off the detection of devices that are not installed inside the chassis. 2. Software problems:

1) The installed security software is being tested in the background: the security software will conduct security detection on the system during the boot process, which takes a certain amount of time, if the time is too long, then consider whether the security software is installed too much, causing mutual interference. For example, if you install 360 Security Guard, Guard, and Kingsoft Poison at the same time, you need to uninstall other security software and keep only one.

2) There are too many boot auto-start programs: many software, especially network software, are set to run automatically at boot by default, which will greatly slow down the boot speed, it is recommended to use 360 security guard or other similar security software to clean up and optimize the computer to accelerate the processing, and you can also manually cancel the boot auto-start of non-essential programs. (3) Trojan horse and virus infection

It is recommended to use 360 Security Guard + 360 Antivirus or other similar security software for comprehensive scanning. If the above operations do not work, you need to reinstall the system.