There is a row of street lights that always trip after ten minutes, how to solve it

To solve this problem, we can consider the following aspects:

1.Check the circuit and power supply: First of all, we need to check whether the circuit and power supply of the street light are normal. It could be due to a faulty circuit or an unstable power supply that tripped the street light. We can call in a professional electrician to check the circuits and power supply to make sure they are working properly.

2.Replace the street light bulb: If the electrical circuit and power supply are normal, then the problem may be with the street light's bulb.

The bulb can be damaged or aged, causing the street light to trip after being on for a while. We can try to replace the bulb and choose the most durable bulb to make sure it works properly.

3.Check the street light controller: The street light controller is a device that controls the street lights to turn on and off, and it may be that the controller is faulty and the street lights trip.

We can ask a professional technician to check the street light controller to make sure it is working properly. If there is a problem with the controller, you can consider replacing it with a new one.

4.Clean up the surroundings of street lights: Sometimes, the environment around street lights may affect the proper functioning of street lights.

For example, there may be leaves, dust, or other debris accumulating on a street lamp, causing the bulb to overheat and trip. We can regularly clean the environment around the street lights to ensure that the street lights can dissipate heat properly.

5.Regular maintenance and inspection: In order to ensure the normal operation of the street lights, we should carry out regular maintenance and inspection.

You can create a maintenance plan to regularly check the circuitry, power supply, bulb and controller of the street lights to identify problems and fix them in a timely manner. In this way, the problem of street lamp tripping can be prevented and solved in advance.

In short, to solve the problem that the street light always trips after ten minutes, it is necessary to consider factors such as the circuit and power supply, the light bulb, the controller, and the surrounding environment. Through inspection and maintenance, we can find the root cause of the problem and take corresponding measures to solve the problem and ensure that the street lights can work properly.

There are two solutions.

One is that there is an electric current around you.

The second is that the power supply of the street lamp is wrong, the light is lit to produce heat, and the power supply is reduced, and the natural tripping is not possible.

There is a row of street lights that always turn on for ten minutes and then trip and lose power, and the reasons for this situation may be:

Street lights ......1.There may be leakage at some point on the street light line.

2.Is it possible that the capacity of the switch is insufficient?

3.The connection between the switch and the line, because of the poor contact heat, the tripping and power dropping are lost!

4.Poor contact at a certain point inside the switch leads to tripping and power failure.

In short, there is a problem! Need to double-check! When you check, you can start with the switch, and you will definitely find the problem if you check down one by one!

Measure the current to see if it is about running under the operating current, so it will be activated after 10 minutes. There will be no problems in the general design, most of them are because there are leakage points, and there is no good way to check and eliminate them in sections.

There is a row of street lights that always trip after ten minutes, how to solve the two solutions One is that there is a current around you to dry up the other is that the power supply of the street lamp is wrong, the light is on to produce heat, then the power supply is reduced, and the natural trip, if you can't solve it, you can find a solution on the [Jiangxi Mingwei Power Blog].

In this case, the initial consideration may be that there is a leakage and short circuit somewhere, so it will trip. You can only report to a professional electrician for maintenance.

Street lights trip frequently.

Leave it empty. Close the brake for half an hour to jump, sometimes an hour to jump the reason:

1.Caused by the poor performance of the air opening itself;

Solution: Replace the air switch directly.

Can. 2.A faulty timer itself can also cause the air to trip;

Solution: Pass the timer to test the machine or replace it directly.

3.The line has aging and leakage, which leads to tripping;

Solution: Check the street lamp line, if it is aging, replace it in time.

4.If the street lamp adopts electronic energy-saving lamp, when the electronic components have poor thermal stability, it will cause leakage and air opening and tripping from time to time;

Solution: Check the electronic energy-saving lamp, if there is a flashing situation, replace it in time.

Method 1: Use cloud services.

1. When you forget the password of your phone's lock screen, first find a computer, open a browser, and log in to the OPPO official website. 2. After logging in, click "Find your phone" in the upper corner of the left jitomato. 3. In the "Find your phone", it will automatically search for the location of your phone that has "turned on the function of finding your phone" (that is, your screen is locked) 4. Then click "Screen Lock" on the left side, a dialog box will pop up, enter a new screen unlock password, and click Lock.

5. Then the cloud will send the instructions you set to your mobile phone, and when the sending is successful, it's done! Then wait a while to turn on the phone, enter the new unlock password to unlock the phone screen, if you wait for a while and still can't restart the phone. Method 2:

Shuangqing removes the lock screen password 1 and turns off the mobile phone. 2. Press and hold the [Power Button] and [Volume Down Button] at the same time. 3. The next screen that appears is:

Language selection screen], there are three types of language, please select the first one. (Note: If the phone does not enter the double clear mode, but is turned on, then please try steps 1-2 again).

4. Enter OPPO recovery mode and find [Clear Data & Cache]. 5. Select [Clear User Data and Cache]. 6. After the clearing is successful, restart the phone.

Summary. Overheating of the circuit breaker (empty on) can cause tripping. There are generally three reasons for circuit breaker tripping, the first is overload, the second is short circuit, and the third is leakage.

2. Automatic air switch, also known as low-voltage circuit breaker, can be used to turn on and off load circuits, and can also be used to control motors that do not start frequently. Its function is equivalent to the sum of some or all the functions of electrical appliances such as knife switch, overcurrent relay, loss of voltage relay, thermal relay and leakage protector, and is an important protective appliance in the low-voltage distribution network. 3. After the main contact of the circuit breaker is closed, the free trip mechanism locks the main contact in the closing position.

The coil of the overcurrent tripper and the thermal element of the thermal tripper are connected in series with the main circuit, and the coil of the undervoltage tripper and the power supply are connected in parallel. When the circuit is short-circuited or seriously overloaded, the heat increases sharply, and the armature of the overcurrent tripper is engaged, so that the free tripping mechanism acts, and the main contact disconnects the main circuit. Hope that helps.

The lights are on for half an hour, why does it trip suddenly, and what is the reason?

The lights are on for half an hour, why does it trip suddenly, and what is the reason? Hello dear, the lamp is not a high-power electrical appliance, and it trips after about half an hour of opening, which is relatively rare. If the reason is analyzed, it may be that the internal components of the lamp are aging, the insulation performance is reduced, the temperature is low when the machine is turned on, and the insulation resistance value can still resist the impact of voltage.

Didn't jump before.

The lamp is not a high-power electrical appliance, and it trips after about half an hour of opening, which is still relatively rare. If the reason is analyzed, it may be that the internal components of the lamp are aging, the insulation performance is reduced, the temperature is low when the machine is turned on, and the insulation resistance value can still resist the impact of voltage. Hope it helps.

The airlock is a bit hot.

Overheating of the circuit breaker (empty on) can cause tripping. There are generally three reasons for circuit breaker tripping, the first is overload, the second is short circuit, and the third is leakage. 2. Automatic air switch, also known as low-voltage circuit breaker, can be used to turn on and off load circuits, and can also be used to control motors that do not start frequently.

Its function is equivalent to the sum of some or all the functions of electrical appliances such as knife switch, overcurrent relay, loss of voltage relay, thermal relay and leakage protector, and is an important protective appliance in the low-voltage distribution network. 3. After the main contact of the circuit breaker is closed, the free trip mechanism locks the main contact in the closing position. The coil of the overcurrent tripper and the thermal element of the thermal tripper are connected in series with the main circuit, and the coil of the undervoltage tripper and the power supply are connected in parallel.

When the circuit is short-circuited or seriously overloaded, the heat increases sharply, and the armature of the overcurrent tripper is engaged, so that the free tripping mechanism acts, and the main contact disconnects the main circuit. Hope that helps. Hope it helps.

The lights are on for half an hour, why does it trip suddenly, and what is the reason?

Hello, glad to be able to your question. The cause and solution of the sudden trip of the electric light is as follows: this situation is generally caused by leakage or short circuit in the circuit, and it may also be caused by abnormal voltage.

The cause of the trip may not be related to the electric light, or it may be that there is a leakage elsewhere. Check each line to determine what is causing it. The safe operation of the traction power supply system that supplies power to the electric locomotive should be ensured.

In the event of an accident, the relay protection device installed in the traction substation (opening and closing station, partition pavilion) will be activated by the short-circuit current generated by the accident, and the circuit breaker that supplies power to the accident point will be automatically disconnected, so as to reduce the scope of the accident and ensure the safe operation of other equipment and the normal power supply to the non-accident line. This action of automatically disconnecting the circuit breaker due to an accident is customarily called "tripping". The main task of the traction substation (opening and closing station, partition pavilion) is to supply power to the catenary.

In addition to the equipment failure of the traction substation (opening and closing station, partition pavilion) itself (the proportion of this situation is very small), the short-circuit current that causes the "tripping" mainly comes from the catenary. The catenary is in an uninterrupted state of operation, and the electric locomotives under the catenary are constantly performing busy transportation tasks, as well as the joint coordination of transportation and public works departments. Accidents in any area can affect the catenary and "trip" the circuit breaker.

My house suddenly tripped, but the lights were on, what was the reason?

Your power supply is always empty and responsible for all power protection, and the other switches are generally designed according to different parts such as air conditioning, lighting, small household appliances, bathrooms, etc., so that some trips do not affect lighting and other circuits, so the design is reasonable. According to your situation, it is likely that due to the large power of the electric water heater, coupled with the simultaneous operation of other electrical equipment of the computer, it is more important that without your knowledge, the instantaneous current of the refrigerator is 4-6 times that of normal operation, forming an overload phenomenon. If there is no empty opening fault or leakage, it should be avoided that multiple electrical appliances work at the same time.

Summary. Dear, the lighting lights trip as soon as they are turned on and off for the following reasons:1

The current emitted by the light source is too large, and the motor trips instantaneously; 2.The power supply voltage of the lamp is too high or too low, resulting in instantaneous tripping of the motor; 3.The wick is aging and the filament is overloaded, resulting in tripping; 4.

There are wearing parts (such as starters, electric eyes, etc.) faulty, resulting in the circuit board tripping; 5.A faulty switch that causes the circuit to be disconnected and unable to be energized, thus tripping.

Pro, as soon as the lighting is turned on and off, the reasons for the lack of tease are as follows: 1The current emitted by the light source is too large, and the motor trips instantaneously; 2.

The power supply voltage of the lamp is too high or too low, resulting in instantaneous tripping of the motor; 3.The wick is aging, the filament is overloaded, and the reputation leads to tripping; 4.There are wearing parts (such as starters, electric eyes, etc.) faulty, resulting in the circuit board tripping and annihilation section; 5.

A faulty switch that causes the circuit to be disconnected and unable to be energized, thus tripping.

The main gate can only be closed when the lighting is turned off.

As long as you turn on the switch, it will trip immediately, and the light will not turn on.

Dear, if the lighting is turned off, the main gate can be closed on the sail. This is because Sun Qingwei is due to the opening of the lighting switch, a large amount of current will pass through the lighting switch, when the main gate is only closed by hail, the current will increase significantly, resulting in overload, resulting in short circuit, and even damage to the main gate and equipment, and even personal safety hazards.

Dear, this is the case when the line inside is burned out.

Is this a leakage or a short circuit.

Dear, the general trip is to prevent the current flow, frequent tripping, is leakage.

Even if the lamp is removed, it will not work.

Pro, it's possible, both of these situations will jump, and there is no way to determine what the cause is if you don't remove it for inspection.

Dear, it is recommended to find a maintenance electrician to remove the light switch, according to this situation, it is necessary to replace the parts.

Hello dear and happy to answer for you. It has been found for you: the street lights trip frequently, and the street lights are on for 4 hours before tripping Reason:

1.Caused by the poor performance of the air opening itself; Solution: Replace the air switch directly.

2.A faulty timer itself can also cause the air to trip; Solution: Pass the timer test or directly change the crack.

3.The line has aging and leakage, which leads to tripping; Solution: Check the street lamp line, if it is aging, replace it in time.

4.If the street lamp is an electronic energy-saving lead wax lamp, when the electronic components have poor thermal stability, it will cause leakage and air opening and tripping from time to time; Solution: Check the electronic energy-saving lamp, if there is a flashing situation, replace it in time.

I hope mine can help you and have a great day