Cosplay prop making Giant Scythe Ask for help in a variety of ways

Ahem......Although the Buddha bones and snake teeth made by our club are relatively fragile, they are still made ......But our method is made out of the heavier ha! First of all, the material: the size of the PVC board is provided by itself (this thing is ...... in our school store.)Please be patient and look for ......A lightweight steel pipe (any shape is good......It depends on the specific needs ......A glue gun with a few rubber strips (compare the cost of rubber strips......A roll of foam texture double-sided tape, 502 bottles, various colors of oil-soluble paint ......Gone!

Steps: First cut the PVC board into the shape you need, prepare two pieces, cut the remaining PVC into small strips, and wait for filling (of course, if you have a better filler, please replace the PVC ...... automatically.)Stick two pieces of PVC sickle on both sides of the steel pipe, and then stick the pointed part firmly, and then try to stuff the filler into the scythe head to make it solid and three-dimensional (this step is more difficult......Use a glue gun to glue in to achieve the desired effect, and finally use foam double-sided tape to glue the edges and use scissors to repair the desired effect, so that the sickle head looks ...... from thick to thinFinally, remember to tear off the layer of paper that talks about double-sided tape, otherwise it will not be painted! The rest is the decoration work, spray paint (preferably oil-soluble ones that are not easy to fade), decals or something, ......The above is the production process of our club, you can make better props according to this improvement, and the most important point is to give full play to the wisdom of all (we have at least 5 people involved in the production of this scythe......Use everything you can use!

**Some of the prices are also cheap.

It's very difficult! Mainly in the carving pattern, the material is wood, if you want to keep it for a long time, you have to be a better wood, Nanmu or something, it is easy to fade with art paint, as long as it is stained with a little water, it will be spent, it is best to spray paint, it is not very expensive, you can go to the cos props bar to see, the essence of what can be used for reference.

**There are some for sale, but it seems that there is no special talk about prop making.

One person in front of the cosplay Upanishads "This book is all kinds of books.,Shenma has it.。 There is about 40p prop making.

There is also the "Tuopu Zhi" that we are familiar with, but not every issue has the content of prop production, only occasionally. , I lost ......I was going to upload a few ** about the book, but apparently Du Niang was arrogant again......If needed, it can be sent to you by email).

COS trend journal,Each issue will have a chapter of tutorials for making props.,It will also teach P pictures.,Makeup.,There's also an interview with a famous coser.,It's sold in general newsstands.,15 copies.。

If you want to learn more about cosplay, you can go to Miliu.com, which has a variety of tutorials about cosplay, including makeup, props, post-production, and the work that needs to be prepared, precautions, etc. In addition, it is important to attend more exhibitions around the local area, which will help you deepen your understanding of cosplay.

"The Secret of Cosliay", written by Ten Nights, is probably helpful for beginner cosers.

There should be a bubble version of the advertising store, and there are many advertising stores on the side of Qixinggang This is also a pro of Chongqing.

Hardware trading city, in the stone bridge shop.

Do it yourself...Go to the hardware store, or go to the construction site to find it, or find someone to do it. I don't ...... professionally

Their clothes are slightly thicker ......Amateur parties are not recommended to do ...... on their ownIf you have a variety of tools, then discuss ......The vending machine can use plastic board or foam board, spray paint and colored paper on the outside, and the knife will not be very expensive ......The sickle uses a PVC pipe [your water pipe], plus foam or plastic cardboard to cut the shape, and spray paint is good......Helmet ......You give up......The above recommends [cos prop bar] and [**].

Buy props or clothes from a franchise store to learn first

Or search for tutorials online

Clothes are easier to make, but you have to have the skills to change similar clothes, and if you have very strong hands-on ability, you can also try to do it yourself

If you have the conditions, go to a wooden craft store. There are carvers there.

When I paint EVA, I usually have a layer of white glue, a layer of acrylic, and then I spray paint.

You see if it's the scale calculator in this post, I'll send it to you if you want, and you can do it yourself.