How can longevity flowers be green and bloom more?

It can maintain health and burst the pot to bloom in all seasons. Kalancho is a succulent plant with a low cluster of fat, shiny leaves that is verdant all year round. From December to April, the flowers are bright and dazzling, and the flowering period is long and luxuriant, and the ornamental value is high.

Environment, soil, water, nutrients, pruning.

First, the pot should be small and transparent, and the loose sandy soil is the best for planting. Longevity flowers are best planted in clay pots with good permeability, but they are not beautiful indoors, and can be coated with plastic pots or porcelain pots, or directly planted in small purple sand pots or plastic pots. When planting, put a layer of crushed charcoal blocks or crushed hard plastic foam blocks at the bottom of the pot to enhance its permeability.

Although it is not very selective, it is prone to root rot in heavy clay soils, and grows best in loose and fertile slightly acidic sandy loam soils.

Second, moderate water control leaves luxuriant, fertile, phosphorus and potassium flowers are colorful longevity flowers are pulpy plants, the body contains more water, so it is more resistant to drought and waterlogging, and grows well under the condition of dry air in high-rise buildings. In spring and autumn, about 3 days after seeing the potting soil dry, water it once and keep it slightly moist. In summer, it is advisable to water less, 5 days to 7 days to water once as well, placed outdoors for longevity flowers, rainy season to avoid rain, water is easy to rot roots and fall leaves and even die, proper water control potting soil to see dry and wet, then the branches and leaves are more than flowers.

After entering the room in winter, it is advisable to water at noon with water similar to the room temperature, and once a week or so. <

3. Longevity flowers like a sunny environment, except for a little shade at noon in midsummer, the rest of the time should be placed in a sunny place, and at least 4 hours of direct light can be seen every day to grow robustly. The balcony of the building should rotate the flower pot 180 degrees every half month to make it evenly lighted, avoid biasing the crown, and reduce the ornamental value. Although it can also grow in the semi-shade, the stems are thin and the leaves are thin, the flowers are few and the color is light, and it is far less lush than the sunny place.

If it is too shady, it is not only easy to lose the leaves and no flowers, but also if the flowering plants are placed in the shade, the flower color will become dull, and then the flowers will fall off and wither.

Fourth, in addition to the above 3 steps, it is necessary to supplement it with sufficient compound fertilizer or water-soluble fertilizer after flowering, in order to supplement the nutrients consumed by the flower, but can not be maintained by large fertilizer, usually less fertilizer can be applied frequently, the general nymphomaniac longevity flower, are applied once a month or so, and then after the fertilizer, water permeable once, so that the fertilizer is dissolved in the flower soil, so that it will be more conducive to the absorption of longevity flowers. <

Summary: Usually breeding longevity, can not ignore a factor, that is, light, in order to longevity flowers burst pots and bloom more flowers, sufficient light is indispensable, maintenance can be placed at home in the best position of light conditions; Usually it is necessary to maintain with less water, and it is best to keep the potting soil slightly dry, as large water will lead to rhizome rot; Because kalancho flowers are very lively, the pruned branches can be used for cuttings to propagate, and a beautiful pot of kalancho flowers will soon grow.

It's really practical.

Longevity flowers imply health and longevity, usually longevity flowers are long leaves do not bloom, especially easy to die in summer, and the leaves are often yellow. Let's talk about how to make longevity flowers flourish based on my own experience? Clause.

First, the selection of flower pots and the preparation of soil, flower pots should not be too large, otherwise the leaves will be easy to turn yellow if they are watered more. The soil is prepared with 3 parts garden soil, 3 parts river sand, plus 4 parts long-lasting organic fertilizer. Clause.

Second, longevity flowers do not bloom when they need long sunshine, watering to see the usual temperature, when the temperature is below 15 degrees, watering once in 15 days, higher than 25 degrees, watering once in 7 to 10 days. Clause.

3. Fertilization and disease control, fertilization once every 30 days. When black spots appear on the leaves, you can spray the front and back of the leaves with water for a week.

If you want to be green and bloom more, you must pay attention to sunlight and moisture. More photosynthesis can make the leaves better. The right amount of water can make the longevity of the flowers grow better, and at the same time, it can promote excessive or insufficient flowering, which is harmful to the flowers.

Longevity flowers want green leaves and more flowers. One is watering, longevity flowers are drought tolerant and can not be watered for the long time. When the potting soil is dry, water again.

Second, it is light, and it should be placed in a well-lit place after watering, so that it is conducive to photosynthesis and the leaves can grow green. 3. Fertilization longevity flowers are fertilized twice a month, and a large amount of nutrients are consumed after flowering, so they should be fertilized in time. Fourth, pruning, longevity flowers grow new teeth to prune, generally only retain two leaves so that it is more conducive to the growth of side buds, can bloom more buds.

After autumn, pruning should be stopped and fertilizer should be applied appropriately. As long as these points are done, the longevity flowers can bloom green.

Longevity flower growth habits.

It is a perennial herbaceous plant that prefers warm and slightly humid environments. Its suitable growth temperature is between 15-25 degrees Celsius, and it is not cold-tolerant. The temperature in winter needs to be more than 5 degrees Celsius, and it is not resistant to high temperatures.

The temperature in summer is above 30 degrees, so its growth is stunted and it needs to be cooled down. Kalancho no, I don't like clay soil. Generally, it can be mixed with 4 parts of humus soil, 4 parts of garden soil, 2 parts of river sand, and a small amount of bone meal.

It is not only fertile, but also has good drainage and air permeability, which is suitable for the growth and development of the hermit school of the root system.

How to raise longevity flowers to grow vigorously.

Longevity flowers have a lot of water content and are drought tolerant, so they should be properly watered at ordinary times. Water every 2-3 days during the growing season to keep the soil slightly moist. In winter, the temperature is low, so it is necessary to control watering.

From 010 to 1010, longevity flowers were like fertilizer. The fertilizers applied during the growth period are mainly phosphorus and potassium fertilizers and compound liquid fertilizers. After the flower buds are formed in November, potassium dihydrogen phosphate or superphosphate is added once or twice to prolong the flowering time.

The soil substrate is appropriately configured.

Kalanchos prefer a sunny environment and can be placed in a sunny place all year round. In summer, the sun is strong at noon, and it is easy to sunburn the leaves. It needs to be shaded, so it can be placed indoors in a semi-cool place.

Watering just right.

Longevity flowers need to be repotted after a period of maintenance. The new soil should be fertile and loose sandy loam, and tiling the bottom of the pot can increase drainage. It is not necessary to water immediately after planting, but it needs to be watered a few days apart to avoid root rot.

Fertilization is suitable. Longevity flowers can be attacked by pests during their growth, such as aphids, western flower thrips, scale insects, cyclamen mites, etc., which can be directly rinsed with water. If the quantity is large, it can be controlled by spraying fungicide with stove speed.

The lighting is appropriate. In the middle and late stages of flowering, you need to prune the residual flowers in time, and only need to keep the 3-5 leaves below. As long as there are enough nutrients, it is possible to bloom a second time, prolong the flowering period and make the plant more complete.

Ways to make the leaves of longevity flowers grow:

1.Light and temperature: Longevity flowers are short-day plants, and the light requirements are not strict, and timely sunlight and temperature are sufficient.

2.Watering and fertilization: Longevity flowers are succulent plants with a lot of water in their bodies and are relatively drought tolerant. Watering master the principle of seeing dry and wet, and watering thoroughly.

In the current season, the leaves are watered, and there is not much sunlight, and the longevity flowers should see more sunlight, and the watering should be dry and thorough. If you want to grow and flourish, you need to apply this or 2 times a month a month to apply thin fermented soybean fertilizer water during the growing season, so that the flowers can continue to flourish.

Longevity flowers should be more sunny, and watering should be dry and thorough.

If you want to grow and flourish, you can also apply this or 2 times a month during the growing season with thin fermented soybean fertilizer water, so that you can continue to bloom and flourish, and you can apply some fertilizer when necessary.

Some compound fertilizers can enlarge the leaves, and the leaves are too much water.

Generally, redness means that it is frozen, the temperature drops and refuses to grow, and rotten roots will also lose leaves. Don't know which one yours is?

The redness of the petiole is too sunburned, and if you want the leaves to be large, you have to use nitrogen fertilizer.

2-3 pairs of leaves. Longevity flowers. It has the advantage of apical buds, after the side buds grow, when there are two or three pairs of leaves, leave one or two pairs of leaves, and cut off the top part.

In this way, the branches of the longevity flower grow much longer and bloom more. In addition, we must remember to maintain longevity flowers at ordinary times, except for not being exposed to the sun in summer, we must have sufficient sunlight in other seasons, keep the nutrients sufficient, and only provide sufficient fertilizer and water, and the speed of growing side buds is very fast.

Precautions for planting longevity flowers.

Longevity flowers in the growth stage, reasonable top dressing can promote the growth of strong, good growth, the growth season can be every 15-20 days to apply a thin compound liquid fertilizer. After the flower buds are formed in November each year, potassium dihydrogen phosphate can be applied 1-2 times.

or superphosphate.

It can promote the differentiation of flower buds, promote vigorous flowering, and bright flowering.

Longevity flowers like a sunny environment, if there is not enough light for a long time, the branches are long and slender, the leaves are thin and small, and the number of flowers is reduced, which affects the beauty of the plant shape. In spring, autumn and winter, longevity flowers should be kept in a position with sufficient light, hot summer in the north, and light intensity.

Large, pay attention to sunscreen.

This is a longevity flower, sure, very good to raise, light and drought tolerant, put on the balcony bright and ventilated, dry and timely watering, like fertilizer watering when adding a little all-element nutrient solution, flowering constantly, cuttings can take root and survive, try it.

Thank you for your answers, now I understand, go home and control the water.

Longevity flowers are shallow root system, it is best to wait for the potting soil to dry down one or two centimeters when watering, do not wait for the potting soil to dry before watering, because at that time it is already in a state of acute water shortage. In the spring growing season, nitrogen fertilizer is needed to promote the growth of shoots and side buds, and in autumn, it is a critical period for the differentiation of flower buds of longevity flowers, so it is necessary to use fertilizers based on phosphorus and potassium.

The flowers of longevity flowers are rich in color and color, and every burst is very amazing, so if you want it to bloom more, you only need these 4 steps.

1. Give it frequent sun exposure

Kalancho flowers are very fond of light, and if there is less light, the color of the flowers will be light, so it is best to give it plenty of light, even in the hot summer, if there is enough moisture, you can also give it a day of sun.

2. Watering should be grasped well

Longevity flowers are shallow root system, when watering, it is best to wait for the potting soil to dry down for one or two centimeters to do rolling and burying, do not wait for the potting soil to dry before watering, because at that time it is already a state of acute water shortage.

3. Prune in time

This is the most critical point, after the longevity flowers bloom, it is necessary to cut off the residual flowers in time to prevent the waste of nutrients, and also need to prune off the leaves of the diseased and weak branches and yellowing wilted pure ants, so that the side buds can grow much longer, and the pruning can be stopped until the end of autumn.

4. Fertilize correctly

In the spring growing season, nitrogen fertilizer is needed to promote the growth of shoots and side buds, and in autumn, it is a critical period for the differentiation of flower buds of longevity flowers, so it is necessary to use fertilizers based on phosphorus and potassium.

Proper pruning of longevity flowers can make longevity flowers look good, and the plants will grow short and plump, and bloom more.

There are two situations in the pruning of longevity flowers, one is to cut off the residual flowers after flowering. The second type of pruning is to promote plant shape and flowering, and it is recommended to prune in spring and autumn.

If you want to control the shape of the mother plant, you can consider pruning twice, the first time cut the main strip of paper to keep the appearance of 5-10 cm, and then repeat again when new shoots grow, you can increase the branches and promote more flowering, but don't cut too much at once, consider the photosynthesis of the leaves. If it is cut too bald, it may also cause dead plants.

After flowering, when the flowers are about to wither, I cut off the flower balls, and the position of the cut is about the bottom of the two sets of leaves under the flower balls, I often do this, and when pruning, I have to prune all of them together, so that they can bloom at the same time the next flower, anyway, I feel that after I prune, there are more flowers than when I bought them. I'm not a professional flower grower, just a little bit of my own experience

It is necessary to apply some fertilizer and nutrients to the flowers frequently, loosen the soil frequently, water it every two days, and water it thoroughly, and often prune off the yellow and fine branches and leaves to ensure that the rest of the flowers can better absorb nutrients; In addition, it is necessary to bask in more sunlight, so that the longevity flowers can grow better.

It should be noted that it should be exposed to more sunlight, placed in a sunny place for photosynthesis, and properly watered to grow better.

Put it in a sunny place, water it reasonably every day, and fertilize it regularly. This way it will grow more luxuriantly.