What is the dustproof coating of the computer room, and what are the dustproof materials for the wal

<>. 1. What are the characteristics of dustproof paint?

1. The dustproof paint is made of high-grade epoxy resin.

Add high-quality curing agent.

and made of. 2. The surface of the dustproof paint is very smooth, beautiful, and has a mirror effect.

3. The dust-proof paint is very resistant to the corrosion of acid, alkali, salt, oil, etc., especially the alkali resistance is very good.

4. The dustproof paint is very wear-resistant, pressure-resistant, and impact-resistant, with a certain elasticity.

<>. Second, the scope of application of dustproof paint.

The painting requirements of dust-proof paint are relatively high, and the ground height must be clean, beautiful, and dust-free.

Asepsis. It is generally used in the electronics and microelectronics industries, and GMP standards are implemented.

type of pharmaceutical industry, blood products.

Industry, clean room, clean room, hospital, food factory, office and other places. Before the dust paint is painted, the uneven area should be repaired, then cleaned, vacuumed, and if it is a wet location, the wet area should be dried first.

<>. Third, the dust-proof paint construction process.

1.Plain ground processing.

First of all, we must carry out a comprehensive polishing of the original ground, if there is an uneven place, it is necessary to carry out leveling and repair, and then clean and vacuum. When we deal with the bottom layer, we can use a trowel to evenly scrape the prepared pure resin material on the original ground, and completely penetrate and bond with the plain ground, so that it forms a very sticky bottom layer.

2.mortar layer.

Wait for the bottom layer to solidify before putting the putty ready.

layer material plus quartz sand.

Evenly scrape the top of the bottom layer with a trowel, which is to strengthen the compression and impact resistance of the floor.

3.Mesosphere. If the mortar layer is fully cured and then fully sanded, the prepared primer material is flattened on top of the mortar layer with a trowel, which can fill the uneven small pits on the mortar layer and make it smoother.

4.surface layer. After the curing of the primer is completed, we need to use a sander to carry out a comprehensive grinding, and after it is flattened, the ground must be cleaned, and the base surface of the primer should be kept flat and smooth.

We also need to mix and stir the material of the top coat and evenly apply it to the middle coat with a trowel, so that it can form a dust-proof, anti-corrosion, wear-resistant, smooth and bright self-leveling. Surface layer.

The dust-proof coating is developed for the cement floor of the computer room, which is easy to dust and easy to take care of. The dust-proof coating is simple to install, the color is optional, the construction period is short, it can be brushed and painted, the adhesion is strong, and the paint film has high hardness and good toughness after complete hardening, so it has excellent dustproof and wear resistance.

Too much static residual equipment on the wall of the computer room will not only affect your health, but also bring serious inconvenience to your life. Then flooring, you only know those places to know if they have antistatic antistatic pvc antistatic properties.

1.A new type of decorative material on modern lightweight flooring, known as "lightweight material". It is highly valued by Japan and Korea in the continent of Euroca, the Americas and Asia.

Since the early 80s of the 20th century, he has enjoyed overseas success and has entered the Chinese market. PVC anti-static flooring is mainly made of PVC wire, which is manufactured by special processing technology. It resembles marble and has an important decorative effect.

This includes telecommunications, computer technology in computers, computer labs, cleaning factories, and other areas for static elimination and cleaning.

These three complexes are complex and predominantly unisexual. Computer room wall dustproof material composite PVC flooring is often referred to as having multiple composite structures, usually formed using protective layers, produced by stacking 4 to 5 layers of structure (UV protection). Printed film, glazed covering, elastic recovery.

Bubble rings, low creases and other single-layer PVC flooring are called monochrome and transparent. In other words, it's the same color from top to bottom and top to bottom.

3. In the case of coral flooring and page 2: This kind of coral flooring is usually a soft roll of meters, meters, 2 meters, 3 meters, 4 meters, 5 meters rolls. The diameter of each section is meters, 15 meters, 20 meters, 25 meters.

The thickness is only commercial flooring, and the thickness is 4mm, 5mm, 6mm for sports flooring, etc.).

Cleaning and routine maintenance.

1.Spray large amounts of water on electronic floors where dust may be collected. Then use dust to push it onto the floor.

2.If the local soil is important, it can be removed with a wet mop that cannot be pressed.

3.Pay attention to the manufacturer of anti-static products: anti-static materials for the walls of the computer room If the floor is grown to a quasi-static floor with a dry mop, the anti-static wax floor of the anti-static floor cannot be cleaned with water.

4. Recommended work failure period: the main evidence shows that crop yields can be produced and implemented, and the dustproof material on the wall of the machine room is generally 1 to 3 months - b) The repair is necessary to refuel the surface. If the behavior is lost and the demand is exhausted, will the grooming be damaged by friction?

You can get it for free