ETA2834 2 How about the performance of the automatic movement?

It is ETA main movement, Torx positioning than Tissot.

A little higher, the calibre used is also higher than Tissot's stander level blank.

The movement is one level higher. Swiss-made, the movement is ETA2834-2, 25 jewels, ref. 1782-D-34-8, automatic. With date and day of the week, Roman lettering, movement and literal white, 25 jewels swiss made on the hammer, plum blossom is considered to be the approachable traditional brand of Swiss watches, **not high.

2. ETA2834-2 is an upgraded product of ETA2824. It's just a calendar and a day of the week that have been added to the original. The speed is about 10 seconds a day. Overall it's still okay. It is mainly used in Tissot plum and omega.

Above. 3. The movement of ETA2834-2 The same movement is very different from that of a fake watch, and it is sold for 1,000 to 3,000 in Inag.

With plum blossoms and other such brands, sell 3,000 to 10,000 in Tudor.

And Omega sells one to 30,000 depending on the configuration, laymen are often deceived by the Swiss movement said by the fake watch, and the polishing and transformation of other similar ETA rough movements in the later stage are very different, although there is brand added value, but the creation of a brand is not based on advertising can be established, the most important thing is technology and quality.

ETA2834-2 movement The same movement is very different from the fake watch, selling 1,000 to 3,000 on brands such as Inag and Meihua, selling 3,000 to 10,000 on Tudor and Omega, selling 1 to 30,000 depending on the configuration, laymen are often deceived by the Swiss movement mentioned in the fake watch, and other similar ETA rough movements are very different from other big brands, although there is brand added value, but the creation of a brand can not be based on advertising, the most important thing is to have technology and quality.

In terms of thickness alone, the ETA2892 calibre is far ahead of most self-produced movements on the market.

Usually new to mechanical watches, the first to know or use the movement is none other than ETA2824-2 and Seiko's 7S26, of which ETA2824-2 is not only stable, high accuracy, but also has a hand-winding function.

Therefore, it is higher than the Japanese movement, but in all aspects, it is still the first choice for novices, and it is also listed as one of the three treasures of ETA along with ETA2892-A2 and ETA7750.

**Breitling Colt Automatic II stainless steel automatic movement Hours, minutes, seconds, date 38mm double-sided anti-reflective sapphire crystal Water resistant to 500 meters Reference price: 81,500 Taiwan dollars.

Hello, 2892 positioning than the other two advanced points, a little smaller thickness, most of the assembly in the Swiss mid-range mechanical watches, the ** of the table are nearly 10,000 yuan.

Both 2824 and 2836 are positioned similarly and are both more basic movements, with 2824 being a single calendar and 2836 being a double display of the calendar week. Swiss watches equipped with these two movements** can be purchased from 3,000 yuan.

As for use, these three are very mature movements, and the power reserve is also comparable, and the 2892 is more stable.

It is the model of this movement, the ETA movement used by many Swiss watchmakers, or the development of their own movements through the ETA movement. The 2836 is a double calendar core developed on the basis of the 2824, 25 diamonds.

Many Swiss watches use this movement, depending on the polishing process, Tudor Best, Plum Blossom, Tissot, Longines, have all used this movement, and now the most common is Mido.

There are Tissot, Mido, Longines, Hamilton, Certina.

The average mechanical watch has a spiral. When people wind their watches, the spirals are tightened at the same time. As soon as the spiral is released, it begins to move the movement.

After you receive the watch, you first need to wind it up (rotate the watch 25 times clockwise), and then as long as you wear it for enough time every day, the rotor can replenish the energy of the clockwork, so that the automatic watch can run normally.

How to buy: Check the pendulum.

The method is to gently hold the watch that relaxes the mainspring and slowly wind, while looking at the second hand, which should be rotated at the beginning of the winding, otherwise it will not meet the standard.

Check the sound. After a few springs, put the surface up and down, and the handle up and down, and the stem side up, down, left, and right, and listen to the frequency beats in all directions should be basically the same, and after the winding, the sound should be crisp and free of noise.

Needle pin pin test. The dial hand should not feel loose or tight, but when dialing upside down, it is normal for the second hand to stop or turn upside down.

Select a style. In addition, it should also be noted that because the watch is assembled and inspected in the "static debugging", the dynamic error of the watch will be caused by the arm movement after wearing it on the hand, which will make the time go slowly, and in addition, the watch will become slower and slower after a long time. Therefore, a few seconds faster is appropriate for "static debugging".

Ernest Borel Borel (Ernest Bouillo), Inag, Plum Blossom, Omega, Tissot, Longines are all available in the basics. Tissot with this movement is the cheapest.

FIYTA's is eta2892, **10800

This movement is similar to the ETA2824.

For example, the ETA2824 movement is a product of the 70s of the last century, and more than 40 years of practice have proved that it is a good movement, and it is also one of the three main movements of ETA.

ETA2824, ETA2892, ETA7750, the three ** from low to high, the so-called ETA2825 is jointly developed by Tissot and ETA Yunyun is just a gimmick.

Because both of these belong to the Swatch Group, which has many watch brands, Tissot is the lowest-end, as for the upstairs obviously does not understand watches, let alone movements, the upstairs said 9S85 movement belongs to Japanese Seiko watches.

Grand Seiko series (commonly known as Seiko GS series) used, Seiko GS movement is comparable to Rolex 3135 movement, of course, this is the manufacturer's slogan, the actual use of precision and wear resistance are slightly worse than 3135, GS series into the table is generally ** from 20,000 yuan, in summary.

Neither the ETA2825 nor the 9S85 is a movement optimized on the basis of the ETA2824, which is commonly found in low-end watches.

Here's the summary: this is a very basic and stable movement, mainly used in the low-to-mid-end market, and is slightly thicker than the 2892, which is the 2824 movement. We can find ETA2824 in many brands, such as Tissot, Mido, Tudor, Breitling, Emmy and some others.

How to distinguish the Seagull Caliber 2892 and the ETA2892 Caliber:

The easiest way to identify is to look at the fixed pile next to the hairspring, there is no fixed pile next to the ETA 2892 movement, and there is a fixed pile on the left and right of the hairspring of the Seagull 2892 movement. This is determined by the structural design of the Seagull 2892 movement, which cannot be changed for the time being. Take a look at the image below:

The picture below shows the Swiss ETA2892 calibre, you can see that there is a circle of Geneva on the deck, and there are no three fixed villages.

The picture below shows the Seagull Caliber 2892, you can see that the deck is all covered with fish scales, and there are three fixed villages.

The two most used movements of the Longines Replica and their differences:

The number of shipments of replica watches of the Longines brand is very large, especially the classic master series. The most commonly used Longines replica movement is the 2892 calibre, which is customarily divided into two types in the market, one is the Seagull 2892 calibre (Seagull internal model ST1812) and the Swiss ETA2892 calibre. In fact, ** is also based on the ETA2892 movement and polished into L619 and L888 movements.

The structure and appearance of the movements of the Seagull 2892 and ETA2892 are basically the same, and the similarity is very high. However, the difference between the ETA movement and the Seagull movement is one or two thousand yuan, and the quality and stability are of course not at the same level, which does not mean that the Seagull movement is poor, but the Swiss movement is better.

The two movements are basically of the same level. It's all Swiss-origin movements, and many people say that there are Asian foundries, but I haven't seen any conclusive evidence.

In addition, the ETA2824-2 has a thicker movement, which makes it suitable for use in sports watches, such as Breitling.

The Colt, using the observatory grade ETA2824-2, has been tested by foreign professional magazines for accuracy.

All satisfying. In addition to Tudor.

The ETA2824-2 is also used in the large three-hand and sports models, but the micro-adjustment mechanism and KIF shock absorbers have been replaced, which is unique.

eta2824**：

Breitling Colt Automatic II stainless steel.

Automatic movement Hours, minutes, seconds, date 38mm Double-sided anti-reflective sapphire.

Maurice Lacroix barrel moon phase.

Stainless steel Automatic movement Hours, minutes, seconds, date, day, month, moon phases Sapphire crystal Water-resistant to 50 meters Reference price: 133,000 Taiwan dollars.

Players in other countries also think that the top-level ETA2824-2 is almost the same as the ETA2892-A2 in all aspects, which shows that the performance of ETA2824-2 is quite good. However, the design itself is mass-produced, and more or less in the details of the parts and substrates.

Refer to the above content: Encyclopedia-eta2824-2

It's almost like that, I have it, and it doesn't make a difference.

Hello, these two are ETA's more basic movements, and they are both very classic.

However, ETA positions them differently, and the 2824 is positioned as a low-end automatic movement, usually equipped with branded mechanical watches within 10,000 yuan. The 2892 is positioned as a mid-range automatic movement and is usually equipped with a large brand mechanical watch of 10,000 yuan or more. Of course, there are many small brands that will be cheaper.

As far as the time is concerned, they are very stable, the winding efficiency is very high, and they are all very reliable movements, and the 2892 is thinner. But since the 2892 is positioned in the mid-range, the materials and craftsmanship will naturally be more sophisticated, and the tuning will be more detailed. Mechanical watches that are usually equipped with 2892 are mid-range, and the polishing is more beautiful.

The polishing of the 2824 movement is very simple, mostly a Swiss low-end watch of about 5,000 yuan.

But in terms of timing and stability, these two movements are similar, and you know that evaluating a movement is not just about its stability.

Teach you the difference between the ETA 2892 movement and the Seagull 2892 movement.