After the newly assembled computer is installed with the system, do you have to install those driver

No, generally speaking, if it's a desktop, basically those drivers have already been installed, because the system disk generally puts some commonly used drivers in the system disk, as long as you install the system, it will install the corresponding drivers for you. Of course, some notebook drivers are still difficult to find, so sometimes some drivers of some notes are still not installed, and at this time you need to go to the corresponding official **Go**. If you want to see if your driver is installed, you can right-click on my computer - > management - > Device Manager - > and then you can see a lot of things.

If there is no special sign, it means that it is installed. If there is! indicates that the driver is unusable, if so?

This means that the driver has not been installed. That is to say, there appeared! And?

It's all a problem, and if you don't have it, it's normal.

Scenario 1: Right-click on the desktop "My Computer" Properties Hardware Settings Manager Sound** and Game Controller There is no AC97 or High Definition or other long strings of English below this item, or there is a yellow question mark. Scenario 2:

Click on the bottom left corner of the desktop to start the Control Panel Sound & Audio Devices All settings are grayed out, i.e. they are not available. If there are any of the above two situations, then you go directly to the "Driver Wizard" software, after installing it, double-click to open the Driver Update and check "Sound and Game Controller" to start the update Restart the computer after the update is completed. If the above two situations do not exist, please follow the steps below.

Step 1: If there is no speaker in the bottom right corner of the desktop, start the Control Panel Sound & Audio Devices tick on "Put the volume icon into the taskbar" OK.

When assembling the computer, you need to buy all the accessories, and it should be noted that the CPU should not be plugged in backwards, depending on the foolproof design above. If it is a tower radiator or a water cooling radiator, tear off the film on the side that is in contact with the CPU. If you have a problem with the motherboard interface, just look at the manual.

After the system USB flash drive is ready, press the boot hotkey (this is according to the motherboard brand), select your own USB flash drive to go to the installation page. Unplug the U disk when restarting after installation,Then you can enter the system,After setting it up, you can go to the system desktop,Under normal circumstances, there is a network,If not, install the network card driver in another computer**Driver elf universal network card version,Those drivers can be installed after connecting to the Internet (it should be noted that the graphics card driver is best on the official website**,Good compatibility,You can also use Master Lu to drive the elf)。 Once you've done all that, you'll be able to play with your new computer.

For DIY computers, first of all, buy the hardware you need, such as CPU, hard disk, memory, graphics card, motherboard and main chassis, keyboard and mouse, etc. Then fix the motherboard, install the CPU, and install a fan for the CPU, pay attention to this, if you don't do it well, it is very likely to cause the CPU to burn out due to too high temperature.

When all kinds of accessories are plugged in, pay attention to the power cord should also be connected, and then you can turn on the computer, see if the screen is displayed, of course, there is no system at this time, you need to install the operating system.

The next ghost version of Windows,Then install the system through the USB flash drive,By the way, install the drivers of various hardware,These will generally be installed automatically,Don't worry。

In fact, the steps are not difficult, the key depends on your flexibility and proficiency.

Step 1: Assemble all the hardware of your computer. (Motherboards, hard drives, CPUs, graphics cards, keyboards and mice, monitors, etc.) ）

Step 2: Install the system. The system disc can be prepared in advance, and the system needs to be installed with an optical drive. It can also be a well-made system USB flash drive. Boot select or enter the BIOS to set the boot items, basic fool operation. Note partitioning first, then installing the system.

Step 3: After installing the system and booting it, update the driver with the driver software (e.g. driver energy).

As long as you have hardware like a sound card and a network card on your computer.

And they are all installed correctly on the motherboard.

Once the system is installed, the drivers should be installed and running automatically.

Some hardware that cannot be self-installed with drivers.

When assembling a computer for the first time, it should be noted that all hardware facilities must be installed correctly. For example, the CPU fan cable of the motherboard must be connected to the power cable. Make sure to connect it correctly, and preferably choose a slightly higher power.

Install the system windows10 comes with the driver.

If the system contains all the drivers, it is not needed, if not, the next driver can be installed and installed.

Audio and network card drivers do not need to be installed separately, generally win10 system or motherboard driver comes with. The graphics driver needs to be installed.

I don't know much about it, it is not recommended that you DIY the computer yourself, after all, there are quite a lot of heads. If something goes wrong, you can't figure it out on your own. You can buy a brand machine directly.

The after-sales service of large brands is guaranteed. You also have to find a big physical store for assembly, you say your own configuration, and the other party will install it for you.

Just buy the parts or something, pay attention to the line when assembling, as for the drive or something, when you install the system, it will be automatically installed, and you don't need to install it separately.