The computer s hard drive used to have problems, and now it freezes within a few minutes of turning

1. First of all. Check the power supply; 220V AC power supply (plug and socket are usually called); Then check again.

Computer power supply. (desktop check the fan of the power supply, notebook can listen carefully to see if the CPU and graphics card fans in the machine are rotating);

2. Look. whether the computer can "self-test"; If you can self-test, you can generally reinstall the operating system;

3. If it is a black screen, focus on the inspection parts (including all the causes of the black screen):

cpu；Mainboard; Memory; Graphics; display (desktop display); Power supply (Yes.)

output, but the supply voltage is incomplete); and the plug-in parts and connecting wires of the above-mentioned parts;

4. Check and clear.

For viruses, reset the BIOS and reinstall the operating system. Reminder, if the fault persists after reinstalling the operating system and it is confirmed that there is no virus, you should consider replacing the operating system disk and trying again. Other than that.

System installation. After that, it is best to use it after the patch is completed; to reduce the threat of viruses.

I'm happy to answer for you, your situation shouldn't be a CPU problem: the CPU temperature is higher than 80 degrees, it will automatically shut down instead of crashing, the blue screen is likely to be the graphics card temperature is too high, open the case to clean up the dust, and if it doesn't work, change the graphics card fan, if it's integrated, then be careful about the motherboard temperature, you have measured the temperature of the software to see what the temperature is too high.

The CPU temperature is too high, it is recommended to replace the fan.

It may be that the CPU temperature is too high, so you need to disassemble the chassis of the host and try to dissipate heat as much as possible.

An error is reported on the hard disk. It is recommended to repartition the reinstall system. If you still will, it is recommended to change the system.

This hard drive is not recommended to keep important files.

First of all, check the blue screen** to find a solution, if you need to reinstall the system, you need to reinstall it with a USB flash drive or CD.

Magic Pig U Tray System Preparation Tool:

1. Magic Pig one-click reinstall tool.

2. A USB flash drive larger than 8G (it is recommended to back up the important data of the USB flash drive first).

3. A computer with normal Internet access.

Magic Pig U Tray System Detailed Steps:

1. Insert the USB flash drive into a computer that can access the Internet, open the magic pig and reinstall the system software with one click.

2. Wait for the software to complete the detection and click on the production system on the left, the software will automatically recognize the U disk drive letter, the production mode is default, click to start production.

3. Select the system that needs to be installed, the magic pig software supports x86-64 bit system installation, pay attention to the number of system bits when choosing, and start making after selection.

6. After the U disk startup disk is made, there will be a successful prompt, click Cancel.

7. Exit the USB flash drive and install it on the computer that needs to reinstall the system.

8. Immediately after pressing the boot button, click the USB flash drive boot hotkey, the boot selection interface appears, select the USB disk option, and press Enter.

9. Enter the PE selection interface, use the up and down arrow keys, select the second item, and click Enter.

11. After the reinstallation is completed, unplug the USB flash drive and restart the computer.

12. After waiting for the optimization settings of the system, you can use it when you enter the system desktop (note: there will be several computer restarts during the period, no need to worry, let alone other operations).

The above is the method of installing the system on the USB flash drive, I hope it can help you.

Check whether the hard disk has bad sectors or not, and then look at the memory, which will also cause a blue screen.

You can try to reinstall the system first, if you still have a blue screen after reinstalling the system, then it may be that the memory or hard disk is broken.

Make the system first, if it doesn't work, you have to check the health of the hard disk.

If the system power off is normal but the hard disk cannot be recognized, check the following steps and solve the problem:

1) Check the condition of the hard disk cable after shutting down, whether the SATA cable and the hard disk power cable are connected, plug and unplug them again, and then confirm whether the system can detect the hard disk, if it still can't be detected, continue the following steps, 2) After turning on the BIOS again, confirm whether the hard disk information can be detected in the BIOS, 3) If the BIOS cannot detect the hard disk, it means that the hard disk has been damaged and needs to be replaced.

4) If the BIOS can detect the hard disk, mount the hard disk to another computer, initialize it in the disk manager under the system, repartition it, and use it after formatting.

I've also had such a problem, it freezes or a blue screen when I use it, and I can enter it again after about 10 minutes. I redid the system and the problem is much better, you can also try it and recoat the CPU with silicone.

There are several possibilities.

1. Change the boot order in the BIOS to hard disk first.

2. Jump the hard disk jumper to the main disk, sometimes there is only one hard disk and jump to the slave disk, it is best to use a data cable for the hard disk and optical drive.

3. In the most likely case, the machine configuration is high, the boot speed is fast, and the hard disk has completed the self-test before it is fully rotated, resulting in a black screen after the self-test. Workaround: Turn off the BIOS

Medium quick

poweronself

test4, the data cable of your hard disk is broken, you can change a few data cables to try;

5, there is a possibility that when your motherboard has a problem, if the data cable is replaced or not, see if your motherboard has burned off the chip or capacitor, if not, it is best to let the motherboard repair the motherboard take a look.