-
Anonymous users2024-02-06If you accidentally press the volume button + power button to enter fastboot or you install third-party recovery and other modes, please check whether you see the reboot option, if so, you use the volume key to select reboot (restart), and then click the home button to confirm, to see if you can reboot into the system.
If it still doesn't work, you can directly buckle the battery to restart and try, if every time you turn on the machine or still enter the mode, there may be a problem such as the volume button stuck or a system problem, it is recommended that you take the time to bring the warranty card or invoice to contact the local maintenance site for further testing and processing. Inquire about authorized maintenance sites on the official website.
-
Anonymous users2024-02-05Hello, for the problem you described, it is recommended that you go to the nearest Lenovo mobile phone customer service center to do the problem detection. You can use the following link to inquire about Lenovo mobile phone service outlets.
-
Anonymous users2024-02-04The reason why the Lenovo A60 Kaiye Chi Brother machine stays in the boot screen and can't enter the system may be:
1. The installed software is incompatible;
2. The system file is abnormal or the data of the motherboard of the buried device is lost.
The solution is as follows:
1. Press and hold the power button to try to restart;
2. Restore factory settings;
3. After-sales warranty for repair.
-
Anonymous users2024-02-03Then does your mobile phone respond to the computer, if there is no response, it is recommended to go to the repair shop to repair.
-
Anonymous users2024-02-02Go back to the factory directly, Lenovo has to return to the factory if it is broken.
-
Anonymous users2024-02-01Hello, according to the situation you described, it is recommended that you back up your data first and restore it to factory settings. If you can enter the system normally, you can find the factory reset option in the system settings.
If you are unable to enter the system, perform the following "Double Wipe.""Operate by pressing and holding the "Power button + volume plus or minus" at the same time in the shutdown state"Enter the recovery mode and execute "wipe data." respectivelyand "wipe cache....", restart your phone.
-
Anonymous users2024-01-31The reason why Lenovo A60 stays on boot screen and can't enter the system may be:
1. The installed software is incompatible;
2. The system file is abnormal or the data on the motherboard of the device is lost.
The solution is as follows:
1. Press and hold the power button to try to restart;
2. Restore factory settings;
3. After-sales warranty for repair.
-
Anonymous users2024-01-30If your device cannot enter the system with the fixed screen, we recommend that you perform a simple troubleshooting attempt by following the steps below:
1.It is recommended that you remove the back cover and battery and try to restart, if you can enter normally, it is recommended that you back up the body data and try to restore the factory settings;
2.If the above operations cannot be improved, it may be caused by abnormal system files or data loss on the device motherboard, and you need to flash and check the device. Due to the risk of flashing the machine and may lead to non-insurance, it is not recommended that you deal with it yourself, please take the time to go to the repair station and the engineer will assist you in testing and processing.
Inquire about authorized maintenance sites on the official website.
Flashing the machine can be solved:
Connect iTunes, turn off your iPhone, press and hold the Home button and the Power Off button at the same time for 10 seconds, release the power off button, continue to press and hold the Home button until you see the device recognized in the DFU state on the computer, after the computer prompts, release the Home button, select the recovery option button on iTunes, and click Confirm Recovery in the pop-up selection box (upgrading through DFU recovery mode will be more thorough and less prone to errors). >>>More
The first may be poisoned, changed your default state, and second, you accidentally changed something, and the timing is to shut down a few minutes after booting, which has the same effect as the automatic shutdown after antivirus. The third hardware problem, due to the boot effect, is not necessarily turned off after a while, it may reach a certain temperature and will be shut down, this has to consider a lot of problems, generally in the summer or autumn high temperature season will consider the fan is broken, because due to long-term dust accumulation, resulting in uneven heat dissipation of the fan or can not dissipate heat, and the fan will automatically shut down after reaching 90 degrees, it may be for this reason. You can remove the case to see if the fan is very hot, if it is this problem, if not, it is other problems, and it is not good to introduce them one by one here.
You can end the process and restart the explorer, you can create a new account to see if there is a problem in the new account, if it is the same, it may be poisoned. I suspect it's the virus, because this issue has come up so much in recent days.
You installed Rising and deleted it.
Your memory is only 512, and it's normal to have half of it left after entering the XP system. >>>More