Window Weatherstrip Installation How to use window weatherstrips

Window weatherstrip installation method tutorial, the little brother said in detail, do you understand.

Sealing the gaps with sealing strips will undoubtedly improve the sound insulation effect. Especially for rooms with sound insulation requirements, use sealing strips to seal the gaps. It is also a good supplement.

Answer: Hello, if you want to paste the sealing strip of the window, you need to clean all the parts to be pasted, including the dust in the gaps, etc., to ensure the tightness of the door and window sealing strip equipment and notch.

2.Next, we remove the tape of the sealing strip, stick it on the position that needs to be installed, and when it comes to the interface at both ends, retract the sealing strip to the notch, leaving a certain distance, leaving about 3 cm, and there is a margin.

3.Cut the sealing strip again, press the excess into the inner groove several times, so that the self-adhesive of the sealing strip and the door and window are tightly pasted together.

4.When pasting, you need to pay attention to the first to remove some debris in the notch, which is a necessary step, do not try to save trouble, otherwise if the area is full of dust, directly paste the sealing strip, which will affect the bonding effect.

When installing, it should be inlaid in place, the surface should be straight, and the glass and glass notch should be in close contact, so that the force around the glass should be uniform, and the rubber strip should be disconnected on an inclined plane at the corner, and the glue should be injected and bonded firmly at the disconnection.

Before installing the glass, it is necessary to carefully remove the debris in the notch, such as mortar, brick chips, wooden blocks, etc., and the glass should be carefully aligned when placed to ensure that the gap on both sides is uniform, and it should be fixed in time to prevent collision and displacement, and deviate from the center of the notch. The rubber sealing strip can not be pulled too tightly, and the blanking length is 20-30mm longer than the assembly length.

When fixing the glass with sealant caulking, the glass should be squeezed with rubber strips or rubber blocks first, leaving a gap for glue injection, and the glue injection depth should not be less than 5mm, and the glass should be kept from vibration before the glue cures.

Hello, this generally has a manual, you can see it by looking at it.

<>1. Glass stripping: manually insert the correct tip surface of the strip into the contour groove, and then press the outer surface of the strip to press the strip into the gap between the glass and the profile. Note that the strips at both ends should be retracted to a point in the middle, leaving a length of 1-2 cm before cutting off and pressing into the notch.

2. Glass gasket strip and mouth strip: After welding the corner of the window frame and the window frame, the strip should be moved in the correct direction, and a special roller should be used to push the strip into the profile groove. At the same time, press down on the strip head until it fits into the contour groove Since the strip is an elastomer and may shrink after rolling, therefore, when the strip is installed to both ends of the interface, the ends of the strip will retract into the middle, the length of 2 to 3 cm should be retained, and then the cut will be inserted into the notch so that the shrinkage problem can be solved.

Use a black sealing sponge strip to wrap the inside of the glass around the top of the window gap, and apply it evenly with glass glue on the outside of the sealing ring.

Most of the open and closed pores are formed during the preparation of porous solids, and sometimes they can also be formed in the post-treatment process, such as high-temperature sintering can make the open pores become closed pores.

The most effective method is to adjust the catalyst or add a pore opener to improve the large purity rate of the porosity, mix it in the material system, affect the surface tension of the system in the process of foam plastic molding, and promote the opening of the bubble at the appropriate time, prevent the shrinkage of the product, improve the flexibility, and improve the dimensional stability of the product.

1. How to install window seals.

First of all, clean some dust on the window side shelves; Then push the window seal into the window frame in the order from left to right and from top to bottom; Finally, cut off the excess parts at both ends of the adhesive strip with scissors to ensure that the 4 corners of the window sealing strip can be well connected together.

When installing sealing strips on windows, be sure to pay attention to the length of the sealing strip 2 cm to 3 cm longer than the length of the window, and also pay attention to the corners, preferably with glue to bond firmly.

Second, how to choose window seals.

1. You can smell it with your nose first, if there is a strange smell, if there is, then it means that this material is not very environmentally friendly.

2. Look at whether the surface of the sealing strip is smooth and whether there is any contaminated place, if there is, then it means that the quality of the sealing strip is not very good.

3. Pay attention to the dilemma when installing the sealing strip.

First of all, it is necessary to clean all the dust or oil around the window frame before installation, and at the same time ensure the flatness of the glass frame.

Secondly, when installing the sealant, you can't pull it very tightly by hand, if you pull it too tightly, then the edge banding strip will fall off in the later stage.

Fourth, what is the function of installing sealing strips on the cover windows.

1. It can prevent some small flying insects outside the window from flying into the house.

2. It can prevent outdoor dust from entering the home.

3. On rainy days, it can prevent outdoor rainwater from seeping into the home.

4. It can play a certain sound insulation effect.

Fifth, what are the materials of the sealing strip?

1. TPV material: The elasticity of the sealing strip of this material is very good, and it also has a great guarantee in terms of quality.

2. One of the biggest features of this kind of sealing strip is that it is very durable.

3. Silicone sealing strip, this kind of sealing strip has good heat resistance, and it is the most ideal sealing strip material.

The installation method of window seals is as follows:

Tools Raw materials: foaming agent, sealant.

Method Steps:

1. After welding the window frame and clearing the corner, press the rubber strip in a clockwise direction, use a special roller to push a little rubber strip into the notch, and press the head of the rubber strip down into the embedded notch. Since the strip is an elastomer and may retract, the correct way to install it is to leave a shrinkage margin of 2-3 cm in the middle and then cut it to be embedded in the notch.

2. Insert the rubber strip into the profile groove by hand, and then press the exposed surface of the rubber strip to press the rubber strip into the gap between the glass and the profile, and call it to fit perfectly, the rubber strip at both ends should be retracted to the middle, leaving a length of 1-2 cm to cut off, and install it into the notch.

Tips for choosing window seals:

1. Smell it with your nose to see if there is any peculiar smell, the normal PVC material will have a little bit of mellow smell, and it is almost impossible to smell.

2. Wrap the sealing strip around the profile as tightly as possible and place it at a high temperature for a period of time (on the roof or in a sunny place). See whether the contact surface between the surface of the profile and the sealing strip is stained and discolored, whether the dust on the surface of the sealing strip is yellow (there is oil and it is easy to absorb soil), oil seepage, and whether it is stained with dirty hands.

3. There will be a lot of some cheap sealing strip fillers, so the surface will not be very bright, and those that are very cheap and not bright in appearance are not advisable.

With the continuous development of modern society, we pay more attention to the quality of life, the quality of the living environment affects part of their quality of life, so good decoration is essential, the following is a detailed introduction by me for you, window sealing strip installation steps and how to use.

How to use the window leaky stool seal.

Glass mat strip and mouth strip: (window frame, window sash) should be welded to clear the angle of the strip according to the correct direction with a special roller to push the strip into the profile notch, and at the same time press the head of the strip down to the embedded profile notch. Since the bead is an elastomer, retraction may occur after being rolled down, and the correct way to do this is:

When the strip is installed at the interface at both ends, retract the strip a little in the middle, leaving a shrinkage margin of 2-3 cm, and then cut it and insert it into the notch.

Glass stripping: Insert the tip of the strip into the profile groove by hand according to the correct side, and then press the exposed surface of the strip hard to press the strip into the gap between the glass and the profile. The strips at both ends are retracted a little to the middle, leaving a length of 1-2 cm, then cut and pressed into the notch.

The use of window seals.

According to the different uses, window seals can be divided into three categories: door cover seals, wool strips, and glass seals (rubber strips). The sealing strip of the door sleeve is mainly used for the sealing between the door panel and the door frame, while the wool strip is mainly used for the sealing between the door frame and the door leaf, and the glass sealing strip is mainly used for the sealing between the glass and the door leaf and the frame.

Window seals can not only play the role of sound insulation and waterproofing, but also play the role of energy saving and warmth, so the installation process of the door material is very particular. In terms of material, it must have good tensile strength and good elasticity, and aging resistance and temperature resistance are also indispensable. There is also a good match between the specifications of the door and window sealing strip and the door and window slots.