-
You've been tricked. There is a virus on your computer.
-
Reason for automatic shutdown of the computer:
The computer system is poisoned or malware, the CPU fan is broken, the CPU temperature is too high, the temperature is overheated, the power supply is broken, or new hardware is added, the power supply is insufficient, the graphics card or graphics card fan is broken, the motherboard is broken, the motherboard core is overheated, etc., the computer will automatically shut down.
Auto Shutdown Troubleshooting Methods:
1. There may be a problem with the BIOS settings, enter the BIOS to restore the default settings or take out the battery of the motherboard, reverse the buckle discharge, and wait for 5 minutes to reverse install it. Purpose: To restore the default values of the BIOS settings and eliminate the automatic reboot or shutdown of the BIOS cooling presets.
2. If the computer shuts down automatically when using a certain application software, the automatic shutdown failure may be caused by this program software, and the program software can be uninstalled.
3. Then check the power supply, the power supply quality is poor, aging or the power is too small, which can not meet the power supply needs of the computer accessories, and the high-power and high-quality power supply can be replaced.
4. Then use the elimination method to check the memory, graphics card, CPU, CPU fan, motherboard, etc.
5. Check the memory, the memory quality is not up to standard, poor heat dissipation, overclocking, mixing and inserting of different brands of memory and the CAS value setting is too low, etc., which can cause the computer to shut down automatically, and the memory parameters can be adjusted accordingly in the BIOS.
6. Check the motherboard, the motherboard aging, capacitor failure or pulp, the motherboard power pins, the motherboard and the chassis backplane short circuit can cause automatic shutdown, you can take the motherboard out of the chassis to check or test, then check whether the CPU fan rotation and the CPU temperature is normal, and then check whether the bottom of the CPU fan heatsink is dry, if it is dry, clean the silicone on the CPU fan, and then recoat the good silicone. If the fan is not normal, replace the CPU fan.
7. Cleaning method: It is a method to eliminate faults by cleaning the dust of the parts in the computer host. Dust is one of the factors that can also cause computer automatic shutdown failures, dust can cause parts aging, pin oxidation, poor contact and short circuit and other failures.
For these faults caused by dust, it is generally more effective to use the cleaning method.
8. The power supply system is unstable, which can also cause the occurrence of automatic shutdown faults, and a UPS backup power supply with voltage stabilization function can be considered.
-
Hello, this situation will be roughly these situations.
1. Computer heat dissipation problem (the hardware temperature is too high, the computer will self-protect and restart) Elimination method: disassemble and clean the ash. Choose a regular repair provider.
2. System failure. (Mistakenly deleted system files or viruses).
Exclusion method: Reinstall the system, and the virus enters the security system to scan and kill the virus.
3. Hardware failure, memory, motherboard, etc.
Troubleshooting: Carry out repairs, replace hardware.
If you don't know how to exclude Fangda or questions, you can ask me.
-
It is estimated that it is a graphics card or driver problem, it is recommended to redo the system first, and then find someone to look at the graphics card after it doesn't work.
-
The system is reinstalled, or 360 repaired, or restored.
-
If there is a problem with the software, then redo the system.
-
Share common computer tips, computer knowledge, computer skills, computer common problem solutions, etc., what we share today is, win7 4 ways to enter safe mode, necessary skills for computer to enter safe mode repair, thank you fans for your continued support.
-
Safe mode restricts the operation of some software. Let's kill the virus.
-
How many years have you been using? Is the BIOS battery dead?
Try something like Driver Magician.
-
You can check the memory module, it may be that the memory module is not plugged in properly.
-
If there is a problem with the system, you can install the system from it.
-
The automatic shutdown of the computer is mainly caused by the following reasons:
1.Poor heat dissipation. Due to the influence of weather temperature or the insufficient number of revolutions of the CPU fan, the system overheats, which will lead to the automatic shutdown of the computer, it is recommended to check whether the system temperature is normal.
2.Memory reasons. When the contact between the memory and the motherboard socket is loose, it may also cause the computer to shut down automatically, it is recommended to check whether the memory is plugged into the motherboard.
3.Power issues. The lack of power supply is also an important factor in causing the computer to automatically shut down, but from this configuration, the possibility of this problem is very small.
4.Software factors. Computer shutdowns caused by viruses or Trojan horses also abound, especially the recent epidemic of shockwaves, which can cause the system to reboot and shut down.
5.Problems with hardware compatibility. Chances like you are that are the problem.
There are several kinds of questions, and I will go down in order of the closest cause1The capacitance of the computer motherboard is bad, and the CPU cannot dissipate heat due to the fact that the CPU does not rotate due to the fact that the CPU does not rotate 3There is a problem with the power supply in the computer, 4 systems are installed more or system problems, 5 computers have viruses installed with 360 and Rising fire prevention, etc.
First of all, see if it is a system (virus) problem, press F8 on boot and press the up or down arrow to let the system stay in the selected state or press delete to enter CMOS, see if it will restart, if the reboot has nothing to do with the system or virus, check whether the fan is installed (there is a problem with CPU heat dissipation), whether the power supply is reset or not, if not, add me QQ
Possible causes and solutions for automatic shutdown of the computer immediately after it is turned on: >>>More
Causes and solutions:
2. Cable problem (replug in, check VGA or DVI interface) 3. Display problem (check whether the electrical socket is powered on, if convenient, connect it to other computers to see if it is normal). >>>More
You can directly turn off the cool.