How to make a Chinese knot, the process of making a Chinese knot

First, pinch the middle of the rope first

Pinch the rope out of three shaped rings, and then arrange them in a cross shape, the lower end of the rope is not formed into a loop naturally placed, second, bend the middle ring down, let it press the right ring.

3. Turn the ring on the right to the left, press the ring and the center line at the same time, and expose the end of the ring at the left end.

Fourth, the lower end of the middle rope is folded upwards and pressed on top of the right ring, while ensuring that the shape of the original other rings cannot be changed.

5. Turn the left ring down to the right and press it on top of the middle rope in the previous step, while continuing to the right through the original downward pressure of the middle ring.

6. At this step, there are 4 heads up and down the ring, left and right, and at this time, the 4 heads are evenly forced, and the three rings and the middle rope are tightened all around to form a form.

7. Continue to use the same method to turn the three rings and the middle rope in the opposite direction and then wear it out, and the rings are still loose at this time.

8. Tighten the four ends evenly and forcefully around the corner, and the auspicious Chinese knot is successfully completed at this time.

All you need is two sheets of paper and a pair of scissors to make a simple Chinese knot.

There are very detailed breakdown steps on the Internet, so if you're afraid of trouble, it's better to buy a book, bookstores have them.

Methods and steps for weaving Chinese knots:

1. Take a piece of jade thread, the length should be enough, the length of the jade thread generally required by the Chinese knot is 100 cm. The length of the line is determined according to the different thickness and the number of backs of the Chinese knot. Let's make a simple four-round Chinese knot.

Fold the jade thread in half, tie an auspicious knot or snake knot, and divide the jade thread into two strands. Arrange 16 needles on the needle board and wrap the threads around the needles one by one.

2. Next, our thread is hanging down at the left and right ends of the needle, and now the right thread is passed through the jade thread from top to bottom, the shape is wrapped, pressed directly from the top, pulled out from the bottom, this step does not need to carry out any pressing, every knot is pulled out like this.

3. Next, the left one starts to cross all the lines from left to right, one by one. After passing through, the line will appear on the right, and the line on the right will begin to pass out from the right side of Youyun High in a way of pressing and three picks. The four-round long knot needs to be pressed back and forth for a total of four rounds.

After pulling it out, remove all the needles and begin to pull out the shape of the Chinese knot.

4. Extra care is required in this process of drawing shapes. If the shape is not drawn, then it is made in vain. When drawing the shape, pay attention to pulling out those ear wings, and be symmetrical. After the draw, a four-round long knot is completed.

Tools Raw material: monochrome four-wire, moderate length.

2. Turn the two lines below up and press the ring on the right.

The steps of the Chinese knot weaving method are as follows.

First, prepare a 1-meter-long rope, fold the rope in half, press the folded place between the index finger and the middle finger, the left rope is wrapped between the index finger and the thumb, the right rope is wrapped between the middle finger and the ring finger, the knot is shaped, the color and ornaments should be matched properly, the size is appropriate, the two ends of the line can be wrapped around the tape or make it stiff and straight, the interval between the line and the line can be left wider at the beginning, when the line is more complex, it can be fixed with a bead needle, crochet needle, tweezers can assist in pulling.

Second, do the knot counterclockwise counterclockwise to press the rope head back, one by one, and then put the last rope through the first circle, the take-up should not be too tight, knotted, use crochet or tweezers to adjust the line, pay attention to the knot shape is beautiful, collocation, recognize the direction of which thread to draw first and keep a few knot lugs, trim with the same color of thin thread, sew the loose parts firmly. Set with matching beads to add beauty to the knot.

Third, make a clockwise knot This time the rope head is pressed back clockwise, and then the last rope head through the first loop, recognize the position of the line, if there is a mistake, it should be adjusted immediately. At the end of the knot, a simple knot can be braided, or beads or ornaments can be worn, and the treatment of the thread should be concealed so as not to spoil the beauty.

Here's how to make a Chinese knot:

1. Cut a 450 cm long Chinese knot thread and fold it in half.

2. Weave a button knot near the fold.

3. Pull the rope to move the button knot to the end of the twisted rope.

4. Make a double connection after a certain distance.

5. The two ropes that lead from the double junction begin to weave the wheat ear knot, which is 30 cm long.

6. Tie a double knot at the end of the ear knot.

7. Fix the remaining rope on the plastic foam board with a pin and form a cross shape.

8. Fold the upper part to the bottom, the right part to the left, the original lower part to the top, the original left part to the right, and press one by one clockwise.

9. After tightening, repeat it counterclockwise according to the steps just now.

10. Pull out the pin, take it off, pull it tightly, pay attention to draw the small ears on the four sides into symmetrical lace, and complete the production of Chinese knots.

The Chinese knot is a hand-woven handicraft, and the sentiment and wisdom it shows are one of the aspects of the ancient civilization of the Han people. It was originally knotted by the Paleolithic sewing of clothes, and then extended to the ritual records of the Han Dynasty, and then evolved into today's decorative craft. The jade worn by the people of the Zhou Dynasty was often decorated with Chinese knots, and the bronzes of the Warring States period also had Chinese knot patterns.

It was not until the Qing Dynasty that Chinese knots really became a popular folk art. Nowadays, it is mostly used to decorate the interior, gifts between relatives and friends, and personal accessories. Because its appearance is symmetrical and exquisite, it can represent the long history of the Han nationality and conform to the customs and aesthetic concepts of traditional Chinese decoration, so it is named Chinese knot.

In Chinese knots, there are many knots such as double money knots, button knots, pipa knots, tuanjin knots, cross knots, auspicious knots, 10,000-character knots, panlong knots, caisson knots, double tie knots, bow knots, and brocade knots. The Chinese knot represents unity, happiness and peace, especially among the people, and its exquisite workmanship is deeply loved by the public.

How to tie the Chinese knot: cut a line and fold it in half; Weave a button knot at the fold in half; Pull the rope to move the knot to the end of the twisted end of the rope; The two ropes that lead from the double junction begin to weave the wheat ear knots; Tie a double knot at the end of the ear knot; Attach the remaining rope to a plastic foam board with a pin; In the clockwise direction, fold the upper part to the bottom, fold the original lower part upward, fold the original left part to the right, and press one by one clockwise; I remove a pin, take it off, and I tighten it and finish the production.

1. The Chinese knot is a unique hand-woven handicraft in China, which was originally a sewing knot in the Paleolithic Age, and then extended to the ritual records of the Han Dynasty, and then evolved into today's decorative craft. Chinese knots have many different shapes such as flowers, birds, dragons, fish, shoes, etc., as well as double money knots, button knots, pipa knots, cross knots, auspicious knots and other knots, which represent unity, happiness and peace, and combined with modern life, developed into two series of products of ornaments and clothing.

2. Chinese knots were extended from the Paleolithic Age to the ceremonial records of the Han Dynasty, and then evolved into today's decorative crafts. The Zhou Dynasty people often wore jade with Chinese knots as decorations, and the Warring States period bronze also had Chinese knot patterns, prolonging the hunger and space until the Qing Dynasty was the time when the Chinese knot really spread in folk art, at that time it was mostly used for interior decoration, gifts between relatives and friends, rock limbs wide objects and personal accessories.

3. The preparation of Chinese knots is roughly divided into three categories: basic knots, change knots and combination knots, and its braiding technology, in addition to being proficient in various basic knotting skills, has a common knotting principle, and can be summarized as basic coarse and bright techniques and combination techniques. The basic technique is to use single, double or multiple lines to weave, and use the changes of parallel or separated threads to make colorful knots or knots.