Please help translate the following English computer problems

A problem was identified. To protect your computer from damage, Windows has been shut down.

Restart your PC the first time you see a screen that stopped due to an error, and if it appears again, follow these steps:

Check to make sure you have enough disk space. If a drive is identified in this stop message, make the drive unavailable or contact the manufacturer of the drive update. Try changing the adapter.

Contact your hardware seller for a BIOS update. The BIOS memory option is set to "No". If you need to restart your computer using the "safe" mode disabling or removing parts, press F8 to select Advanced Startup Options, then select Safe Mode.

In general, rebooting is OK. If it recurs, it is necessary to consult a professional, and the specific situation is analyzed on a case-by-case basis.

The computer does not turn on the system, but there is a lot of English**, teach you how to solve it quickly.

Restart the computer and press F8 to select the last correct configuration.

It's okay, just boot it up normally!

You seem to have clicked on the backup function.

1l see clearly that it is nv4 disp, this is a problem with n card, completely uninstall the old driver and go to the driver home to update automatically.

The computer found a problem and the Windows operating system is now shut down to protect your computer from invulnerability.

If this is the first time you encounter this error correction screen, restart your PC. If this screen appears again, follow these steps:

Check your computer for viruses.

Uninstall and remove all newly installed hard disk controllers.

Run chkdsk f to check for problems with your hard drive, and then restart your computer.

Error Reason:

1、It has a certain relationship with the ghost version,Now the latest version of ghost is 12,If you use the previous version to ghost the new gho file sometimes occurs in this situation,You can reinstall it with a new system and try it。

Workaround:

1. Format the C disk with the official version of the system disk and try again, or try to format the C disk with PQ again.

2. When installing the system with ghost, the system cannot be installed smoothly, and the reason for the A: error prompt is: the file is lost.

4. There is a problem with the hard disk. Sometimes, when writing ghost restore files to the hard disk, it can't be successful, frequent interruptions, and each interrupt is uncertain, the most annoying thing is that it is obviously copied to 98%, and it is about to succeed, and an error prompt suddenly pops up, at this time, it is best to check the hard disk problem, such as the hard disk has bad sectors, so it is best to use the hard disk bad sector check tool to block the bad sectors before ghost, and then format it with pq and so on, and then use ghost.

5. There is a problem with the compatibility of the motherboard with the hard disk. Some motherboards are older and have ghost installation interruptions when encountering certain hard drives. To sum up, to deal with this kind of problem, the following measures can be taken to achieve the maximum ghost success rate.

Roughly it means that an issue has been solved and the window is closed to protect the computer.

If this is the first time this issue occurs, you can restart your computer.

If the problem has already appeared, you can find the most recently installed hardware and software vendor to upgrade.

If the problem continues, you may need to uninstall your latest hardware or software and clear the cache in the BIOS.

A few words about the BIOS is to press and hold a key at the beginning when you restart the computer, and there will be a prompt on the screen, because different computers have different ways to enter the BIOS, if you are not familiar with it, it is recommended not to do this.

If you want to operate in protected mode, press F8 to set it up when restarting.

A problem has been discovered, and the windows have been shut down to avoid harm to your computer.

driver-power-state-failureIf this is the first time you see this "Stop Error" screen, restart your PC. If this screen appears, follow these steps:

Check and make sure that the new hardware or software is installed correctly. If this is a new installation, ask the vendor support of your hardware or software for any software updates you may need.

If the problem persists, disable or remove any newly installed hardware.

It may be that you have a problem after installing the device driver, which is that you have installed the driver software that is not suitable for the device, and it seems that you have to reinstall the operating system. It is recommended to use auxiliary software to help you choose a driver when installing the device driver in the future, such as driver home and other software.