How do I add a compatibility site? How to set up a compatibility site on your computer

To add a "Compatibility Site" to the browser, select "Compatibility View Settings" in the "Settings" of the browser, and then add it in the interface.

1. First of all, click on the "Settings" icon in the upper right corner of the browser.

2. Select "Compatibility View Settings".

3. Click "Add" in the pop-up box.

4. After adding, the site will appear in the box below, so that adding "Compatible Site" to the browser is complete.

Notes:Adding a "compatibility site" to a browser can only be added to a browser on a computer, and there is no compatibility mode on mobile phones.

Sometimes the browser needs to add its own compatibility site, the operation process is very simple, as long as you add it in the tool or setting example, here take IE browser as an example, the details are as follows:

1. First of all, on the toolbar in the upper right corner of the Internet Explorer, click the gear-like "Tools" button.

2. After clicking, a selection box will come out, find "Compatibility View Settings" and click to enter.

<>4. After filling in, click the "Add" button at the back to complete the addition.

Notes:Each browser has a different way of adding it, but it's usually in the settings or in the tools.

Compatibility sites can be found directly in the IE Browser Settings under "Compatibility View Settings.""There, add ** to Compatibility View.

1. First click on the "Settings" icon in the upper right corner.

2. Select "Compatibility View Settings".

4. Click the Add button.

Note: After you successfully add a compatibility site, you need to check the box in front of "Show intranet sites in compatibility view" below.

A1Find and open IE on the desktop of your computer, then in the IE interface, select Tools and Compatibility View settings, check all ** in front of Show All in Compatibility View, and click Close.

2.Or in the developer tools, find and click Tools-F12 Developer Tools, you can see the menu at the bottom of the browser, and select the IE version you want to be compatible with in the compatibility view menu item.

How to set up a compatibility site on the computer, first open the browser on the computer, and then click Tools;

Then we can see that we can switch to compatibility mode, click on it to switch to compatibility mode; After that click on Options; pop up the interface and click on Internet Options;

Then we click on security, after that we click on trusted sites, after that we click on sites;

Then click on Security, then click on Trusted Sites, then click on Sites; Then enter **, then click Add, click Close and you're set.

1. Display the menu bar;

2. Right-click to select the menu bar, compatibility view settings;

3. Menu "Tools" - "Compatibility View Settings";

4. Check "Show all in Compatibility View" - "Off".

The method of adding each browser is not the same, taking Internet Explorer as an example, the specific method is as follows:

1. Click and open the Internet Explorer browser in your computer.

2. Find the "gear" icon in the upper right corner of the IE browser page that opens, and click on the icon.

3. In the pop-up menu, click "Compatibility View Settings".

4. In the pop-up settings page, add the one you need to be compatible with to the Compatible View box. Regiments and brigades.

5. After that, check the "Show intranet sites in compatibility view" and "Use Microsoft compatibility list" at the bottom of the page, and click Close to complete the setting.

Notes:After the computer system is upgraded, the IEE browser is also upgraded, but some ** need to use a lower version of the IE browser to open normally, so you need to reset the compatibility of the IE browser. When setting, it is recommended to switch first and then operate the collapse stool, so as to avoid the data that has been filled in on the page will be lost after being refreshed due to switching.

Some browsers are too old, but if they are older, there will be some problems with higher browsers. So you need to open the browser in compatibility mode.

Compatibility mode is set so that older versions of the software can run in the new framework. In many cases, many software or web pages cannot be run or used if they are not in compatibility mode.

1. Follow the prompts, you need to confirm whether you are using IE browser.

2. You need to confirm whether the current site is set to open with a compatible view.

3. Carefully check whether there is a compatible image recognition icon behind IE**, and click it after finding it.

According to the prompt,This**only supports opening in the computer IE browser,And it is recommended to set the web page as a compatibility site in the computer IE browser,The compatibility site is this**Use the older version of the design page,You need to turn on compatibility to ensure the normal viewing of web content。

Explain this site, your current computer system is not open, you have to update to a system that can be opened.

The main meaning is that it is compatible with some of the sensors equipped inside.

What does that mean? That is, they have a similarity, and then you have to find a place that is compatible with each other.

Some ** may be identified by the system as unsafe nature

Taking the win10 system as an example, the detailed steps to add a domain name to the compatibility site list are as follows:

1. Click Start in the lower left corner of the system desktop.

2. Then find [Windows Components] in the application list.

3. Click on the component list and click to open [Internet Explorer].

4. Click Settings in the upper right corner of the Internet Explorer page, and select [Compatibility View Settings] in the pop-up menu.

5. Click [Add] to add the current site to the list of compatible sites.

6. Finally, click [Close].

The way to add compatibility sites in Internet Explorer is to find the tools on your browser page and open the compatibility view to set them up. The specific steps are as follows:

Tools: PC, Internet Explorer.

1. Open InternetExplorer and click on the "Tools" option.

2. Select the Compatibility View Settings option.

3. After entering the compatibility view settings, fill in the URL for which the compatibility mode needs to be set.

4. Click "Add", and finally click "Close".

Start by clicking on the Start menu bar on your computer's desktop. Click to enter the Edge browser. Click on the three dots icon in the top right corner of the browser.

Click on "Compatibility View Settings". Enter the domain name you want to add and click "Add". Finally, it can be turned off.

If you want to add a domain name to the list of other compatible sites, you can set it first, or you can go into the script first and then add it.

Confession,The list of new financial sites handed over tomorrow,It's actually very simple.,Only in the IE browser can be.。

How to add the domain name Tiandao to the list of compatible sites, I think you should check his regulations, his manual.

Let's go to participate first, just look at some of the news of their profession, or learn about it from the Internet.

Where is the compatibility of IE browser set in Win10?

Set method 1 (this method needs to be switched every time):

2. In the latest IE11, the opening method of compatibility view has been changed, and the specific operation is as follows.

Method 2 of Compatibility View settings (this method can be set once for a site):

1. After pressing the "F10" button under the IE window, the toolbar will appear at the top, click "Tools - Compatibility View Settings";

2. Will""Just add it to the list.

The method is as follows: 1. Find the IE browser in Windows and open the IE browser.

2. In the browser using IE, there is no display in the menu bar, you need to open it, right-click the menu bar, pop up the drop-down menu, and check the "Menu Bar" and "Compatibility View Button".

3. In this way, the menu is displayed in the menu bar, and then click "Tools" in the menu.

4. After selecting the tool, a drop-down menu pops up to select the option of "Compatibility View Settings".

6. In the lowest-end position, check all the options, so that you don't need to add ** at once.