Do I need a wireless router to pull a network cable for my desktop computer?

The following are common ways to access the Internet on home computers.

1. Telecom Internet access --- have a fixed line at home, and access the Internet through a fixed line. This requires a modem, commonly known as ADSL. **Cable to ADSL, ADSL is connected to the computer with a network cable (Category 5 twisted pair).

That is to say, between the computer and the ** cable, use ADSL to connect. The function of ADSL is to convert the data signal to and from the analog signal loaded on the ** line. Enable the flow of information.

ADSL requires a username and password to access the Internet. The person who installed the telecom will tell you. When surfing the Internet, there is dial-up software in the computer, enter the user name and password.

Internet access is available. When not in use, turn off the computer, or **. If you're on an annual subscription, you don't have to

2 Cell network (table modem fiber optic network, etc.) -- the characteristic of this network is that you will have a network cable at home (the difference between network cable and ** line does not need to be said), such a network can be directly connected to the computer. But often, there is an admin web page that requires a login (password, username).

3 Wireless Internet --- This method requires the computer to have a wireless network card, search for signals, and enter the password to use. If the signal doesn't require a password, you're in luck --- you can enjoy it for free. If the other party does not know the password, there is a corresponding decryption tool that can decrypt the password.

Using the method of decrypting other people's passwords to surf the Internet is not recommended here.

To share (wireless or wired) Internet access with multiple people, you need to add a router. The functions of the router are multi-functional, such as automatic dialing (instead of software dialer), route monitoring (such as traffic and Internet restrictions for each machine), and hub (one way into multiple channels). It is possible to achieve all of the above functions at the same time.

Some routers have wireless capabilities. Wireless routing can be implemented. Connection method.

**Line-ADSL-Router-Computer. or Network Cable-Router-Computer.

** ADSL 100-500 yuan router 100-200 yuan routers can use TPLINK and other brands.

There is also a dongdong, called apThe function of the AP is to connect the network cable to the AP, and other computers, if there is a wireless network card, can wirelessly connect to the APIt is very convenient for business trips. Very cheap.

One computer doesn't use a router, a router is to let multiple computers access the Internet.

You don't have to buy it, a computer with a network cable is enough, he asked you to buy one for his convenience, and a router is not expensive, about a hundred.

The router is to let multiple computers access the Internet, that is, to send out a wireless network, that is, wifi, or more than two more desktop plug-in lines at the same time, he said that the dial-up is called a modem, that is, modem, that is, the legendary cat.

To access the Internet on a desktop computer, you need to plug a network cable into the network card socket of the desktop computer, connect it to the LAN interface of the router, and the network card device on the computer side will be automatically connected, and DHCP will be turned on in the router settings. This computer will have wired Internet access.

If you use a router to access the Internet on your desktop computer, you need to set up your router first. If the router has been set up and can use wireless devices to connect to the network normally, then at this time, a wire can be directly drawn from the LAN port of the router and connected to the network cable interface of the computer.

Hello, 1. Click [Start] of the computer. 2. Click Network and Sharing Center. 3. Click Set up a new connection or network.

4. Open [Connect to Internet]. 5. Turn on [Still set up new connection]. 6. Open the [Broadband PPPoE] connection mode7

After filling in the broadband account and password, you can click the [Connect] button to connect to the broadband.

Join desktop computer, if you want to use a router connection, if it is a set router, directly use a wire, connect to the output port of the router, and then connect to the computer host, you can directly access the Internet, if not set, then, first set up the router, enter the web page, enter in the address bar, and then enter the back of the router and the password in, set the IP to dynamic IP to network connection.

If the desktop computer uses the router to connect the Internet to the Internet, connect a network cable directly from the router, and then connect to the host of the computer, and then you can connect the router to the Internet host. You can enable the automatic IP acquisition function.

As long as the desktop computer has a network cable interface, it can be connected to the router through a wired connection to the Internet, that is, one end of the network cable is connected to the computer network port, and the other end is connected to the LAN port of the router, and you can directly access the Internet.

The desktop computer uses a limited network to access the Internet, connect the LAN port of the router to the wired, connect the LAN port of the computer at the other end, log in the user name and password on the router, set the DHCP function on the computer, and the computer automatically obtains the address to access the Internet.

You can use a network cable to surf the Internet, connect the router to the network, there will generally be several output ports behind, choose one plugged into the network cable, and then connect to the host of the computer to use the network.

You need to connect the router with a desktop computer, and then log in to the address of the router on the computer, configure the bandwidth and password for the router, after the configuration is successful, the router will show that the connection is normal, and the computer can be connected to the network at this time.

The network cable from the LAN port of the router is connected to the network port of the computer, so that if there is no problem with the configuration of the router, then the computer can choose to automatically obtain the IP address, so that you can access the Internet.

If you want to use the router to connect the Internet to the Internet, first turn on the network connection of the computer, then find the device for wireless routing, and click Add the device. When the addition is successful, it can be connected to the router to surf the Internet.

Insert the network cable into the computer network cable port and the WAN port of the router correctly, open the web page, enter "and then follow the operation steps on the router manual step by step to set up, and finally the computer can use the Internet."

If you want to use a router to access the Internet wired on a desktop computer, then this is the easiest, just connect a network cable from the internal network port of the router to the upper port of your computer's network card. Then set the IP address and DNS address of the network on your computer. You should be able to access the Internet online.

The way to use a router to access the Internet on a desktop computer is to first link the desktop with the router with a network cable, and then set the AP address on the desktop, which should be set on a network segment with the router, and then you can access the Internet.

Buy a network cable, with the crystal head on one end plugged into the LAN port, and the other end plugged into the network card of the computer. You can use the router to access the Internet wired.

You can connect a network cable directly from the back of the router to your host. In this way, the router is used as a switch, and your computer can be directly connected to the Internet cable without entering its own network account password.

Generally speaking, desktop computers want to use the router to surf the Internet is very simple, you only need to use a network cable to connect to the router's client. Then use the dial-up network to dial up the connection. Or some routers will separate different network cables, at this time, you only need to match the IP address to directly access the network.

It is also very simple to use a router to access the Internet on a desktop computer, pull a network cable from the router, and connect it to the network card interface of the desktop computer, if the desktop computer does not have a network card, it will not be able to access the network, so this is a must.

Method Step 1: Plug in the router and restore it to factory settings (after plugging in, keep holding the reset button on the back of the router for a few seconds). 2. Then pull out the network cable that connects to the back of the desktop computer host and insert it into the WAN interface of the router, and then use another network cable to connect one of the LAN interfaces of the router with the interface of the access network cable behind the original desktop computer host.

Connect any LAN port of the router with a network cable through the network cable connection port of the chassis, and make sure that the corresponding LAN interface indicator light is on, and you can open the web page to surf the Internet after the connection is completed.

It needs to be connected through a network cable, or through a network card outside the computer to connect to the hotspot new number to achieve network connection.

Just connect the host and router with a network cable.

Hello, the router is set up with a network connection, and the router can be connected with the computer with a network cable (network port 1234 can be used, do not use the WLAN interface) to access the Internet. Hope this time it helps!

If you have a desktop computer, you just pull a network cable, then connect to that router, and then set it up to connect to the Internet.

Connect your computer to the router with a network cable, open the network properties on your computer, turn on the local connection, and set the IP address and DNS address to be obtained automatically.

To connect from the router to the desktop computer by plugging in the network cable, you need to log in to the router to set it up. After the setup is completed, the computer that needs to access the Internet should be connected with a network cable or through a wireless router, and use the router to access the Internet.

The steps are as follows:

1.The computer is set to auto-dial.

You need to set the network card of your computer to be automatically acquired and connect it to the router with a network cable.

2.Log in to your router.

Open the browser of the computer (or the mobile terminal is routed through a wireless connection, and also use the browser), enter the default gateway address of the router in the browser", enter the password, and log in. Of course, this information can be viewed on the nameplate at the bottom of the router.

3. Set up the WAN port of the router.

Home broadband users need to set up PPPOE dialing, enter the password given to you by the operator, and click OK.

For leased line users, you need to enter the public network address, subnet mask, default gateway, and DNS provided by the carrier into the static IP address to surf the Internet, and then click OK.

4.Set the wireless name and password.

5.Other. The default LAN gateway and DHCP have been set, and at this point, your setup process is over.

Yes, because it is also possible to connect to a wireless network through a wireless network adapter to surf the Internet.

Hello, generally speaking, desktops need to be connected to a device in the network to access the Internet, which can be a router, switch or hub, etc. If your desktop Brother Ra does not use Wi-Fi and is only wired to connect to the network, you will have to plug the network cable into one of the network devices to get the network connection. Typically, a router is a device that works in the center of the network, and it is a key sliding device that connects the Internet and the internal network, and can provide network connectivity for multiple devices.

So, if you want to connect your desktop to the network, you usually need to connect the network cable to one of the LAN ports of the router, and then connect the other end of the desktop to the network card port of the desktop. This way, the desktop can get a network connection through the router. It should be noted that when connecting the network cable, it is necessary to ensure that the two ends of the network cable are connected correctly and firmly, and at the same time, it is necessary to avoid bending and pulling the device and the network cable when connecting the network cable, so as not to cause unstable connection or damage to the device.