How to flash the password of an OPPO phone?

When you use your smartphone, you sometimes forget the password you set, resulting in the phone cannot be turned on, how to solve this situation? Let's take oppoace2 as an example to introduce how oppo flashes the phone to clear the password.

1. Press and hold the power button on your phone and tap Power Off.

2. Press the power button and the volume plus button at the same time in the shutdown state. It can be released when the phone vibrates slightly.

3. After the phone enters the EMUI interface, press the volume minus button, select "Clear Cache Partition", and press the power button to confirm.

4. After completing the partition, press the volume minus button to select "Factory Reset Reset", and press the power button to confirm.

If you can enter recovery, flash the machine.

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

ROM and then copy to the SD card.

The root directory,ROM is in zip format (you can open it to verify,The folder that must have meta-inf in the zip package is the flash package,But don't change the files in the zip package),Don't unzip it.。 After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

Dear, hello, I am happy to answer for you, how to flash the OPPO mobile phone to clear the password blocking method is as follows: 1. ColorOS 11 system mobile phone: Press and hold the [power button + volume reduction button] for 5 seconds at the same time in the shutdown state - Chinese Simplified] Language - Clear Data] - [Format Data Partition] - Enter the verification code prompted by the interface - Click [Format] to reset the phone.

2. ColorOS 12 system: Press and hold [Power Button + Volume Down Button] for 5 seconds at the same time in the shutdown state - Chinese Simplified] Language -[Clear Data] - Enter the verification code prompted by the interface - Click [Format Data Partition] - Click [Format]. 3. ColorOS - ColorOS System:

If you forget the lock screen password and can't find it, you can contact the official after-sales service center to restore the phone to factory settings": Please bring the purchase voucher to the local OPPO customer service center to flash the phone and clear the code next to the lock screen secret section; "Password Mailbox XX": You can retrieve the lock screen password through the corresponding instructions and password email information; "Reset your password using your fingerprint":

3. Before flashing, the information in the mobile phone should be backed up, such as **number, SMS,**, etc. Or find "Backup Master" on the More Tools page and click it, as shown in the image below.

5. After clicking on the one-key flash, it will enter the automatic flashing mode, which will last about 10 minutes, and it will automatically enter the new system after the brushing is completed, as shown in the figure below.

1. The first step is to take out the opporeno mobile phone, press and hold the power button on the right side, and the shutdown screen appears.

2. Step 2: Click "Power Off" in the lower right corner of the shutdown screen to turn off the phone.

3. Step 3: In the shutdown state, press and hold the upper volume button + power button at the same time, release your hand when the phone vibrates, and the phone enters the EMUI interface.

4. Step 4: Press the volume button on the EMUI interface to select "Clear Cache Partition", and then press the power button to clear the partition.

5. After the partition is completed, press the volume button to select "Factory Reset", and then press the power button to factory settings, and you don't need to unlock the password after restarting the phone.

Answer: OPPO mobile phone can directly clear the password by flashing the phone. 1. Press and hold the power button and click "Power Off". 2. In the state of shutdown, press the power button and the volume up button at the same time to enter the grid system.

3. Select "Clear Cache Partition" and then click "Factory Reset", then restart the phone to clear the phone password.

OPPO phone directly wipe password method.

3. Use the volume button and power button of the mobile phone, use the volume button to turn the page up and down, the power button is OK, clear the cache partition first, then restore the factory settings, and then reset the phone password after restarting the phone. As shown in Fig

OPPO mobile phone flashing to clear the password, wired swiping and card swiping two methods, card swiping is more secure, the function of line swiping is stronger, it is recommended to flash by experienced people.

I don't know if the password can't be opened when I choose to flash the phone, I don't need a password when I flash the phone, I can't operate it myself, and I can hand it over to the repairer phone.

Hello, if the mobile phone is flashed to clear the data, it is usually in the state of shutdown, and at the same time press the on/off key and the + key of the mobile phone to operate, and a flashing prompt will appear on the screen, and you can operate according to the prompts.

However, the screen prompt of some devices is in English mode, if you do not understand English, you need to use another device to translate the English mode on the screen into Chinese and operate.