Huawei CHE2 TL00M cannot connect to WiFi

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

The network standard supported by Huawei CHE2-TL00 is mobile 4G 3G 2G and China Unicom 2G, and it does not support China Unicom 4G 3G network, and China Unicom cards can be used, but it only supports cluster eyes to be used under China Unicom 2G network.

1. Use China Unicom 4G** or ** has opened 4G Internet access function;

2. Put it on a mobile phone that supports China Unicom's 4G network;

3. In addition, the 4G network of China Unicom has been covered in the area where Zheng Pei is located, and the 4G network can be used. Note: The SIM card needs to be replaced with a USIM card to use the 4G network.

Hello friends, if the phone does not support 4G, there is no way.

If you can't connect to the wifi on your Huawei phone, you can try it:

1.Turn the Wi-Fi switch off and on again to try to recover. There is a temporary failure in the system that may cause the hotspot to not be searched. It is recommended to be closer to the router (3-5 meters) and scan it again. Distances that are too far away may result in the hotspot not being searched.

2.Please check whether the hotspot name contains Chinese or some other special characters, if it contains, it may not be searched (display garbled), it is recommended to modify the hotspot name on the router, change to a simple combination of English and numbers, and then try again to see if you can search for the hotspot again.

Hello, see if your wifi list is too much, if it's to delete a few, thank you.

There are several situations in which the mobile phone cannot be connected to Wi-Fi in the front shed

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in the [Settings] - [About this machine] search;

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

Dear, 1. First of all, confirm that the router has been connected to the Internet network normally, in the case that other mobile phones can access the Internet normally, it is recommended that you restart the mobile phone to try, or try to change to a newer router.

2. Please try to turn on and off the wifi to see if the problem can be solved.

3. It may be that you can't access the Internet due to IP address conflict, please try to set a static IP address (when connecting to WiFi, click Show Advanced Options - > IP Settings Click Static - > Enter the IP address, gateway, and network prefix length all manually once, make sure that the font is the black font after manual input, not the gray font prompted by the system, and then click Connect).

4. Restart the wireless router to see if it can be restored.

5. Have you manually deleted the system files, if you have manually deleted the system files, it is recommended that you try to restore the factory settings.

7. Modify the encryption method of the router to use an 8-digit hybrid password.

The specific steps for connecting the Huawei CHE2-TL00M mobile phone to wifi:

1. Hit the [Settings] button.

2. Click [WLAN] in the settings menu.

3. Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi].

4. Click to open, and a lot of wireless network names will appear on the [WLAN Settings] setting page, find the corresponding WiFi and click to enter.

5. Enter the password of the wifi to open the wireless network.

Hello, 1. If the first Wi-Fi hotspot is an encrypted hotspot, please confirm whether the password is entered correctly, and pay attention to case sensitivity.

3. Please put the mobile phone within the effective distance of the Wi-Fi hotspot, too far away will weaken the network signal, resulting in the automatic disconnection of the network connection.

4. (Show Network Refusal) The Wi-Fi hotspot may have reached the maximum number of connections, please try to connect to other available networks.

5. Imitate Youqing (showing network refusal to access) Check whether the wireless router has turned on the blacklist and whitelist (MAC address filtering) function. If this feature is turned on, the phone may be recognized as a restricted access device. It is recommended to restart the router after reconfiguration.

For details on how to set up, please refer to the router manual. After the router is configured, delete the original WLAN hotspot on your phone (click Select not to save) and try to connect again.

6. If the IP address is being obtained when you connect to the WLAN hotspot, please set the static IP. Thank you.