What should I do if my vivo phone is stuck, and how to deal with my vivo phone stuck?

Updated on technology 2024-03-11
8 answers
  1. Anonymous users2024-02-06

    Solve Android phone lag and battery consumption.

  2. Anonymous users2024-02-05

    Hello, Caton, according to the status of the phone, such as the installed APP, whether there is too much cache, some programs running in the background, running data exchange, then choose to close some of the apps that do not need to run in the background, which will also improve the mobile phone Caton, of course, depending on the mobile phone for many reasons.

  3. Anonymous users2024-02-04

    How to deal with mobile phone stuck:

    1. Upgrade the system version.

    The new version of the system has improved the compatibility and stability, optimized the performance, and entered Settings - System Upgrade (some models are: Settings - My Device - iQOO UI Version), you can view the system version information. If it's not the latest version, we recommend upgrading your experience.

    2. Restart your phone.

    Restart your phone regularly (e.g. 2-3 days), rebooting can effectively clean up the cache and alleviate the lag.

    3. Check whether the mobile phone is hot.

    Enter i Butler - More - Mobile Phone Cooling, check if the temperature of the mobile phone is high? When the temperature of the mobile phone is high, the system performance will be appropriately reduced to reduce the power consumption and heat generation of operation, and the phenomenon of stuttering may occur temporarily. It is recommended that you avoid using your phone while charging, reduce the screen brightness appropriately, and turn off background apps and functions that you are not using, such as Bluetooth and Personal Hotspot.

    4. Check the power-saving mode and power situation.

    If the low battery mode (Settings - Battery - Low Battery Mode) is turned on, it is recommended that you switch to normal mode (Settings - Battery - Normal Mode) and keep the battery sufficient (more than 20%).

    5. Clean up the storage space.

    When the phone runs with insufficient memory and storage space, it may cause lag, which can be cleaned up by the following methods:

    Use "One-click Acceleration" to clean up background apps that you don't use anymore to keep your phone in a better state;

    Enter the mobile phone i manager and click one-click optimization to continue the optimization, after the optimization is completed, the mobile phone i manager will display the optimization results and setting suggestions. According to the prompts, complete the corresponding settings;

    Enter the mobile phone i Butler and click on Space Cleanup, wait for the scan to be completed, click "One-click Rest Assured Cleanup" to delete the junk cache files, and follow the page recommendations to uninstall infrequently used apps to keep the storage space sufficient (it is recommended to reserve more than 20% of the free space).

    6. Check and update the software.

    If it's a third-party app that's stuck, go to App Store - Manage - App Update and try to update the software. The latest version generally solves some compatibility issues with the app itself, and with the latest version, you can be guaranteed the best experience.

    7. Uninstall and reinstall the software.

    Uninstalling and reinstalling the software can improve the problem of app lag caused by abnormal data, please back up the important data of the software in advance.

    8. Restore factory settings.

    It is recommended that you back up your important data and try again after resetting your phone to factory settings. How to operate: Go to Settings - System Management - Backup & Reset - Erase All Data (Some models are:

    Settings - More Settings - Factory Reset - Erase All Data), tap to enter and follow the on-screen prompts. Erasing all data will restore the phone to its original state, delete all data in the system space of the phone, including accounts, system and app data and settings, and installed apps, please back up your data in time before operation.

  4. Anonymous users2024-02-03

    Mobile phone jamming is generally caused by too full memory, you can ask the phone memory, such as turning off the software self-start function, or delete some unnecessary software,** ** This phone will be much faster, it is best to clean it regularly.

  5. Anonymous users2024-02-02

    Change to a phone with a large storage space.

  6. Anonymous users2024-02-01

    The solution to the phone lag is as follows:

    1. Clean up the running memory.

    and storage space.

    use"One-click acceleration"Clean up background apps, use iManager to clean up your phone's storage space in time, and uninstall infrequently used software to keep the remaining storage space at more than 20%.

    2. Check whether the mobile phone is hot.

    Or use it while charging.

    When the phone is seriously heated, the performance decreases and freezes. It is recommended to avoid using the mobile phone while charging, reduce the screen brightness appropriately, and turn off applications and functions that are not in use or use abnormal power consumption, such as Bluetooth, NFC, etc.

    3. Check the power-saving mode and power condition.

    Power saving mode In low power mode or low battery situation, the device will reduce part of the performance to save power, you can go to Settings - Battery - switch to normal mode to use the observation, and keep the power sufficient (more than 20%).

    4. Switch to a good network for networking applications.

    When the network is unstable, the software will slow to load, so please try to change to a good network.

    5. Upgrade the system and software to the latest version.

    The new version improves compatibility and stability, you can try to upgrade the system, and check the upgrade to the latest version in the software.

    6. Uninstall and reinstall the software.

    Uninstalling and reinstalling the software can improve the software lag problem caused by abnormal data, please back up the important data of the software, uninstall the software, and then go to the app store.

    Reinstall the software.

    7. Uninstall the third-party Phone Manager.

    class software. The mobile phone has built-in i butler software, which is more compatible. If you have installed third-party phone management software, uninstall the app and try it.

    8. Check accessibility – accessibility.

    If you enable the Accessibility feature, it will increase the load on the system and cause performance degradation. It is recommended to go to Settings - Quick & Assist - Barrier-free, and turn off unwanted functions in time.

    9. Restart your phone.

    Restart the phone, restarting can effectively clean up the cache and alleviate the stuttering phenomenon.

    10. Reset your phone.

    After backing up your phone data, go to Settings - System Management - Backup & Reset, and click"Reset all settings"Try it, and choose if necessary"Erase all data", reset the phone and try again, please back up the phone data in advance.

  7. Anonymous users2024-01-31

    You can view the operation method of mobile phone stuck:

    1. After upgrading, the mobile phone will optimize the system application, and there may be a short period of slow lag, please observe and test after 1 day.

    2. When the network is unstable and the speed is slow, the software will load slowly, please try to replace the network with a good one.

    3. Restarting your phone can effectively clean up the cache and alleviate the lag, so it is recommended that you restart your phone once a week.

    4. Bring up the control center and click "One-click Acceleration" to clean up the background;

    5. Go to i Butler - Space Cleanup, clean up the cache, and uninstall the software that is not commonly used, it is recommended to keep the remaining storage space at more than 20%.

    6. When the body temperature is high, the system will adjust the processor frequency to reduce power consumption and heat generation. Please go to i Butler -- Utilities -- Mobile Phone Cooling -- One-click Cooling to cool down.

    7. If the power-saving mode is enabled, the system will appropriately reduce the processor frequency to prolong the battery life, it is recommended to enter Settings - Battery, switch to balanced mode, it is recommended to maintain more than 20% power.

    8. The mobile phone has built-in i butler software, which has good compatibility. If you have installed third-party phone management software, it is recommended to uninstall such apps and try to destroy them.

    9. It is recommended to adjust and reduce the image quality of the game appropriately. The higher the game resolution, special effects, anti-aliasing, and other display effects, the heavier the processor load, which is more likely to cause the game to run unstable.

    10. Clear the application data after backing up the data: After backing up the software data, go to Settings - Application and Permissions - Application Management - Find the stuck software and click it"Clear data"with"Clear the cache"and turn it back on.

    <>11. If the function in the barrier-free is enabled, the processor load will be increased, it is recommended to enter Settings - Quick and Auxiliary - Barrier-free, and turn off the unwanted function in time.

    12. The new version of the system has improved the compatibility and stability, it is recommended to go to Settings - System Upgrade - Upgrade the system to the latest version.

    13. After backing up your phone data, go to Settings - System Management - Backup & Reset, click "Restore All Settings" to try it, and if necessary, you can select "Clear All Data" to reset your phone.

  8. Anonymous users2024-01-30

    Summary. Clean up storage spaceWhen the phone runs memory and storage space is insufficient, it may cause lag, you can use the following methods to clean up: use "One-click Acceleration" to clean up background apps that are no longer in use, so that the phone is in a better state;

    Hello, the annihilation ant is very Rong Shi is fortunate to serve you to answer questions, I have seen your question in Hongzi, and I am sorting out the reply for you, don't be in a hurry to end the consultation, please wait patiently for about 2 minutes

    Hello Kiss, happy to answer your questions. vivo phone is stuck, you need to clean up the storage space, oh <>

    Clean up storage spaceWhen the mobile phone runs memory and storage space is insufficient, it may lead to lag, which can be cleaned up by the following methods: use "one-click acceleration" to clean up background apps that are no longer used, so that the phone is in a better state;

    Enter the mobile phone i butler point grip noise one-click optimization Continue to optimize, after the optimization is completed, the mobile phone i manager will display the optimization results and setting suggestions. According to the prompt, guess the game to complete the corresponding setting of the ear skin pin;

    Enter the mobile phone i butler and click on the space cleanup, wait for the scan to be completed, click "one line of stupid keys to clean up" to delete the junk cache file, and follow the page recommendations to uninstall the application that is not often brought back to the first place, to keep the storage space full (it is recommended to reserve more than 20% of the free space).

    If it is a third-party application that is stuck, search and go to the app store - Manage - Application Update, and try to update the software that leaks the land. The latest version generally solves some compatibility issues with the app itself, so that Chunqing can guarantee the best experience with the latest version.

    Uninstalling and reinstalling the software can improve the application lag caused by abnormal data, please back up the important data of the software in advance before operation.

    It is recommended to prepare Li Xian slag which quietly has a good copy of important data, and try again after restoring the phone to factory settings. How to operate: Go to Settings - System Operation and System Management - Backup & Reset - Clear All Data (Some models are:

    Dear,So vivo mobile phone Caton needs to clean up the storage space,It's normal to not have enough storage and Caton<>

    vivo is a global mobile Internet smart terminal company, committed to creating smart phone Xiang Oak products for consumers with the ultimate photography, enjoyable games, and hi-fi**. The star products of the season mainly include the S15 series, X80 series grip, vivo X fold, vivo X note, etc.

    Kiss, thank you for the consultation, give a thumbs up, thank you. <>

    Dear, the above is my hope to help you, you can click on the upper right corner of the "end of hunger service", and give a thumbs up. If you have any other questions, you can consult me again, and finally wish you a happy life and a happy mood! <>

Related questions
21 answers2024-03-11

How to deal with mobile phone stuck: 1. One-click acceleration to clean up the background software; 2. Clean up the memory of the mobile phone: (1) Enter the mobile phone i butler - mobile phone acceleration space management to clean the cache file; (2) Go to your phone settings -- more settings -- app management -- find the programs you often use (such as QQ, WeChat, etc.) -- store -- clear cache and data, and restart your phone. >>>More

14 answers2024-03-11

Restore all the settings of your iPhone by following the steps: >>>More

13 answers2024-03-11

Some very practical power-saving tips, let's learn them together! >>>More

18 answers2024-03-11

If you are using a Huawei phone and the number of signal bars in the status bar is sometimes high or low, or the " " symbol appears on the signal bar, we recommend that you take the following methods to try to solve the problem: >>>More

20 answers2024-03-11

Mutual transfer is a software that can share files, applications, **and** without using data, and there is also a one-click change function, which can easily transfer the content on one mobile phone to another. The first step is to install mutual transfer on both mobile phones that send and receive files, and the specific steps are as follows: >>>More