Glory 30 fell into the pool?

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

2.Remove the SIM card.

3.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data, there may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Mobile phones are made of delicate electronic components, and there is a hidden risk after liquid ingress, so it is recommended not to try to turn them on.

3.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

Don't turn on the machine first when you fish it out. If it falls into the water and he turns off the machine, it means that the motherboard has water ingress and can go to the maintenance point for repair. Don't turn on the machine first when you fish it out. If it falls into the water and he turns off the machine, it means that the motherboard has water ingress and can go to the maintenance point for repair.

Before repairing, you can put it in rice, rice can absorb water, and the dead horse is regarded as a live horse doctor, if not, change to a new mobile phone! Don't turn on the machine first when you fish it out. If it falls into the water and he turns off the machine, it means that the motherboard has water ingress and can go to the maintenance point for repair.

Don't turn on the machine first when you fish it out. If it falls into the water and he turns off the machine, it means that the motherboard has water ingress and can go to the maintenance point for repair.

Before repairing, you can put it in rice, rice can absorb water, and the dead horse is regarded as a live horse doctor, if not, change to a new mobile phone!

If the phone falls into the water, don't choose to turn it on, if it is likely to burn the motherboard wiring of the phone, you should use a hair dryer to dry the moisture in the phone, and then turn it on, you can also take it to the mobile phone repair shop and let the maintenance personnel deal with it.

Don't turn on the phone after falling into the water, use a hair dryer to blow it, or find a professional mobile phone repair.

If the mobile phone falls into the pool, do not turn it on first, you should quickly cut off the power supply, battery and chip magnetic card, let it stand for a few days, and then try to turn it on or take it to the repair shop for repair.

You must be happy in your heart, and you have an excuse to buy a new phone.

Personally, I don't think it's worth fixing.

Use a hair dryer to turn on hot and cold air alternately, aim at the opening of the mobile phone such as charging port, headphone hole, SIM card slot, etc., try to see if it can be turned on, and choose a specialty store when sending it for maintenance to prevent some people from stealing parts.

After falling into the water, take it out first, and then take off the phone case and use a hair dryer. Turn on the highest setting and turn the temperature to the minimum. Go to the microphone and the charging port until they are dry, and then try to turn up the volume, it should not get quieter or noisy. That's it.

If the mobile phone falls into the pool, you can only throw it away and buy a new one, which is basically scrapped, and it is not cost-effective for you to repair it.

After the mobile phone enters the water, do not turn it on, wipe the surface of the mobile phone with a clean soft cloth, and then put the mobile phone in the middle of the rice bag, the rice has a good moisture absorption effect, so that after 48 hours, take out the mobile phone, and then turn it on to use normally.

Then quickly take it out and shake it dry.

Throw away and buy a new one, how simple.

Even a few seconds is enough to break the phone, the inside of the phone cannot be flooded, and your phone is not waterproof in the first place, so prepare to change the phone.

In general, electronic products are afraid of water, and it is very bad to get into the water. But there are still many friends who accidentally let the mobile phone into the water, is the mobile phone in the water and it is not saved? Actually, no, as long as you take first aid, there is still a way to recover.

Next, let's take a look at whether using a hair dryer can save the phone from entering the water.

1. First of all, save your mobile phone from the water as soon as possible, wipe the surface water, remember not to shake the phone, don't think about shaking it, shake off the water, you must know that in fact, there is an air barrier in the small gap in the mobile phone, and it will not enter the water when it falls into the water at a simple time. If you shake it, it's good, it's all water, it's transparent. All, the first step, take it out, wipe it dry, and cannot shake it off.

2. Next, quickly turn on your phone, take out the battery, card, etc., and then wipe off the surface one by one. It is still necessary to remind you not to shake and blow, and it will be difficult to get water in the place where there is no water. After wiping dry, let it dry slightly.

Then it's time to prepare for the final step.

3. Take out the dried rice at home, put the battery, mobile phone and other key parts into the rice, and use the powerful water absorption function of the rice to save your mobile phone. After a day, you can take it out, it's basically dry, and there are no problems. Of course, depending on the degree of water ingress on your phone, if it is very wet, you can change some dry rice and repeat for a while.

One thing to note here is to prevent small, broken rice from entering the inside of the mobile phone, and it will be more troublesome at that time.

4. Many people will use a hair dryer to blow in this step, in fact, the hair dryer is not very good, and the risk is actually the same as the aforementioned throwing of the mobile phone and blowing, which is easy to lead to water in the place where there is no water. If you use hot air, it is easy to damage the screen of the mobile phone, which will seriously lead to deformation, and may not be able to display and the sequelae of water lines.

The above is the introduction of what to do if your phone falls into the water, I hope it will help you!

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

If you fall into the water, you can pick it up immediately. Don't turn it on, don't use it, dry it with a hair dryer, and put it in a ventilated place for a few hours!

Then I suggest you don't use it right away, the phone falls into the water, if the water is too much and deep, even if you soak it, the water will run from the charging port horn and microphone hole to the fuselage, the screen will be soaked in water and there will be water stains, and the motherboard battery will be flooded and cause a short circuit, burn out the components, and the motherboard will reimburse the phone for breakage. Therefore, it is best to turn off the mobile phone as soon as possible after entering the water, and then take it to the after-sales service to disassemble and dispose of the water before it can be used with peace of mind.

Although it can be used, I am afraid that water will flow in, so I should turn it off immediately, dry it with a hair dryer, and then turn it on and use it.

This is fine, now the mobile phone is sealed, that is, the electric hair dryer will blow more, and it will be fine when it is turned on when it is dried. There is no problem with normal use.

Honor 30 supports IP68 waterproof, so take it out and put it in the meter and let it stand for 12 hours before taking it out, take it out and check whether the tail plug - earpiece - camera is fogged, whether the battery is bulging, whether the screen can be used normally, if it is greater than or equal to 2 problems, it is recommended to send it to the official after-sales service for testing, check the waterproof standard, and then carry out follow-up maintenance.

Have a great day

No matter what mobile phone falls into the water, after fishing it out, blow it with a hair dryer, and it will be fine.

It is recommended to turn off the device and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance, if you continue to use it or repair it at an unofficial service store, it may further damage the internal components. You can check the nearest service center address on Huawei's official website. If you don't have a backup of your data, there may be a risk of data loss during repairs.

After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Fall into the water for half an hour, be careful not to play, turn off the computer.

3 Situations in which the Phone Falls in Water:

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

What do we do when we drop our phone in the water?

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.