-
The status bar keeps showing the earphone icon is generally when plugging in and unplugging the earphone, excessive force and oblique plugging and unplugging, etc., which is easy to cause the earphone holder to be desoldered, shrapnel deformation, and because the earphone hole is exposed, water, iron filings, dust, etc. may also occur. Workaround:
1. Unplug the earphones many times, and you can rotate them at multiple angles;
2. Try another earphone;
3. Restart the phone to see if it can be restored;
If the problem is still not resolved, please go to the nearest OPPO customer service center as soon as possible for repair.
-
It should be good to unplug the headphones, enter the situational mode, press the normal mode and then press activation, provided that the headphones are removed first.
It may be that there is a bug in the system that causes abnormal use, and it is recommended that the landlord restore the factory settings to see if it can be restored to normal.
If the problem cannot be solved after following the above operations, please bring the warranty card to the local after-sales service center for inspection and repair.
-
Uncalled for? Let's take a look at the virus first, and then restore the factory settings; If it doesn't work, flash the machine; The headphone mode is only available if the headphones are plugged in, and it can't be set, and there should be a problem with the motherboard.
-
How to cancel the headphone mode of the oppo phone.
-
1. Under normal circumstances, unplugging the earphones from the mobile phone will automatically cancel the earphone mode.
2. If you can't remove the headset mode when you remove the earphones, you can plug the earphones back into the phone and then slowly unplug them to see if you can disarm the headphone mode.
3. Check whether there are foreign objects or water stains in the headphone jack of the mobile phone, and check whether the earphone mode can be removed after cleaning.
4. Restore the phone to factory settings, here take the OPPO R15 mobile phone as an example, the specific method is as follows:
1. First of all, open "Settings" on the desktop of the mobile phone to enter.
2. Select the "Other Settings" option after entering.
3. Then tap "Restore Phone".
<>5. None of the above methods can cancel the headset mode, you can bring your mobile phone and warranty card to the nearest OPPO mobile phone official repair center for maintenance.
-
has been in headphone mode or no headphone mode, this situation is estimated to be a foreign object in the headphone plug flush embedded, or other reasons caused by the reset small shrapnel in the headphone socket has not been reset, so the source is so the phone has been recognized in the headphone mode (plugged in the headset cannot be used);
The subject can connect the earphones to the socket, rotate them a few times and then move them out.
If you can't solve it, please go to the after-sales service for help, and the after-sales staff will deal with it properly. You can check the local after-sales address in the setting of the - Personal and Safety - After-sales service information.
If there is a problem, go to the after-sales service, or replace it with a new one.
Hello. We apologize for the inconvenience.
It is recommended that you try to restart the device to observe, after the vibration prompt, it is recommended that you check whether there is a third-party software push information, if there is a corresponding third-party software that can be uninstalled, it is not excluded that the third-party software may be abnormal, it is recommended to try to uninstall the recent installer. If the uninstallation does not work, please back up the body data and try to restore the factory settings. If the problem persists after the factory reset, please contact your local repair station for testing. >>>More
There are many situations that will cause noise in the computer audio, such as the speaker is interfered with, the interface or connection line is not in good contact, and the sound itself is of poor quality. >>>More
My computer is also like this, reinstallation doesn't work, antivirus doesn't work, and finally figured it out, the voltage is too low, when the voltage is lower than 220, the computer will automatically shut down, and the general hot voltage will be low, at this time try not to open the computer, easy to burn out.
I think, first of all, don't you think you've made a mistake? You should think about it yourself, is it wrong to do it yourself? Is there something that makes the boss feel that it is against the purpose of the company? >>>More