What s going on with the Apple 6 getting stuck after updating the system

The CPU of Guo 6 is A8, which is slow to run and its memory is only 1G, which will inevitably change the card and consume more power after updating the system.

If you want your phone to run more smoothly, you can try the following optimizations:

1. Weaken the dynamic effect;

2. Turn off background app refresh;

4. Turn off GPS;

5. Turn off Bluetooth;

6. Turn off providing mobile phone running test information to Apple;

It is advisable to update network facilities.

Method: It is recommended to go to Settings.

General. <>

Reset - Resets network settings.

Introduction to the Apple 6s.

On September 10, 2015, Beijing time, Apple released the iPhone 6S. The iPhone 6S comes in Gold, Silver, Space Gray, Rose Gold. The screen is made of high-strength and medium-strength ION-X glass, the processor is Apple A9 processor, the CPU performance is 70% higher than that of A8, the graphics performance is increased by 90%, the rear camera is 12 million pixels, and the front camera is 5 million pixels.

The camera arguernal head focuses more accurately, and the CMOS is used for noise reduction"Deep groove isolation"Technology, support 4K** recording. In terms of data connectivity, it supports LTE networks in 23 frequency bands and WiFi connections with twice the speed. It was released on September 25, 2015.

It is recommended to restore the factory settings: As the name suggests, a factory reset is to restore the phone to the state it was in when it was factory sold, that is, the state in which you got a brand new and unactivated phone. The change is that all the existing settings of the phone, the stored and installed apps and the app cache will be cleared and all the original settings will be restored to the factory.

A factory reset will reset the phone settings and delete all system files, so pay attention to the backup, which will not have any impact on the phone itself.

1.Find the "Settings" icon in your Apple 6s Plus.

2.Then we find the "General" option.

3.Then tap on the "Restore" option in General.

4.Since here you want to restore your phone to factory settings and initialize the entire phone system, here you can choose the "Erase All Content and Settings" option.

5.If you don't set a password, you will enter the recovery, and if you have set an access restriction password, you will be asked to enter the password.

6.Finally, select the "Erase iPhone" option to restore your phone to its factory system configuration.

There are several reasons for the special card after the Apple 6S update the system:

1. Every time the system is updated, the system needs to re-index the project.

2. The app has not been updated yet, and the developer has not fully optimized iOS, so the performance is not in place.

3. There are more and more functional improvements, the hardware performance can't keep up, and Apple has not fully optimized the outdated hardware.

Workaround:Two: Restore settings, the same principle as reflashing firmware, iPhone can solve some minor problems by restoring settings. Erasing all content and settings will be more effective.

1. If there is an updated iOS system update, please try to use the update system to solve the problem.

2. Open the Settings app on the home screen.

3. Click the [General] column.

4. Click the [Software Update] column.

The ninth-generation iPhone 6S and iPhone 6S Plus were officially released on September 10, 2015, Beijing time, and began to accept pre-orders at 3 p.m. on September 12, 2015, and officially went on sale on September 25, 2015.

The iPhone 6S comes in Gold, Silver, Space Gray, Rose Gold. The screen is made of high-strength ION-X glass, the processor uses an A9 processor, the CPU performance is 70% higher than that of A8, the graphics performance is increased by 90%, the rear camera is 12 million pixels, and the front camera is 5 million pixels.

One is a system problem, which can be solved by using iTunes to reflash the system.

The second is the hardware problem, the hardware cannot keep up with the running speed of the software, resulting in lag.

Method 1: When there is a stuck, you can try to solve it by restarting your phone. After restarting, observe the use again to see if the stuttering problem has improved.

Method 2: 1. If there is an updated iOS system update, please try to use the updated system to solve the problem.

2. Open the Settings app on the home screen.

3. Click the [General] column.

4. Click the [Software Update] column.

Method 3: 1. In the [Settings - General] list, click the [Accessibility] column.

2. Click to enter [Enhance Contrast].

3. Click to open the [Reduce Transparency] option, so as to reduce the load on the system, improve the speed of running display, and increase the smoothness.

1.You can re-modify it by clicking "Carrier" on the "Settings" interface of your phone and changing it to "Automatic".

2.Turn airplane mode on and off. In iPhone6s, swipe up at the bottom of the screen to open the shortcut panel, and then turn on airplane mode, of course, you can also turn on airplane mode in "Settings", after turning it on, wait for 5 seconds and then turn off airplane mode to see if it solves the problem.

3.Restart your iPhone6S, press the power off key in your phone, then turn off your iPhone6s by swiping the screen, then restart your phone and see if it fixes "No Service"!

4.Of course, removing the SIM card and verifying if it is a valid SIM card manufactured by the operator can also solve this problem. See if the removed SIM card has been damaged, worn, or modified, and then reinsert it.

System problems can be solved by using iTunes to reflash the system.

Hardware problems, the hardware can't keep up with the running speed of the software, resulting in lag.

Software compatibility issues.

The more the phone is updated, the more stuck it is:

There are too many programs running in the background.

After all, the memory of 6 is only 1g, it is recommended not to install too much software, delete it if it is useless, and now many software is running implicitly in the background.

The system is not easy to update casually, your mobile phone hardware is fixed, but the software has been upgraded, and the hardware can't keep up, so it's only stuck, so don't update the current system if it's not necessary.

System compatibility issues.

After the system update, there may be other incompatibility problems, your phone reboots, there is something UI problem, it may lead to software compatibility problems, including software stuck, white apples, etc., which is why there is, yes, Apple will fix the bugs tested, and the next system update will solve the problem.

Hello, if you just update the system, there will indeed be a lag and a large power consumption problem.

After a period of use, it will be able to return to normal use.

iPhoneSE upgraded to iOS13 test, this smoothness is the reason why I choose Apple phone!

The system is too big and the phone memory is too small.