How to set the password and fingerprint for the fingerprint door lock

FingerprintsDoor locksSet password and fingerprint:

1. Initialization. First, we press the touch button on the motherboard to start initialization.

2. Enter your password. Press the "Add" key, "Enter the administrative password and end with ".

3. After entering the management password, enter the door opening password and press Confirm; Re-enter the door opening code and press Confirm.

4. Enter your fingerprint. Press the "Add" key and enter the "Manage Password ending in " after the prompt tone; Then press Fingerprint.

5. After the first input is successful, it will prompt "Enter Again", and then press the fingerprint again to enter successfully.

The password fingerprint lock uses the human fingerprint to verify the identity and use it as a certificate to open the door lock. When the fingerprint is activated, the fingerprint recognition window light will be on, and a short sound of "Didi" will be heard, which is a prompt that there is no fingerprint in the system at present. Then "drop-" a long beep prompts to enter the state of fingerprint management; At this point, you can start to set the fingerprint, and the specific steps are as follows:

1. Wake up the screen first.

2. Enter the administrator password and click Confirm.

3. Enter Add User.

4. Enter Add Fingerprint.

5. Add a new user's fingerprint.

6. Enter the fingerprint again, the system prompts that the operation is successful, and the fingerprint is set.

Notes:

1. First of all, we open the slide of the smart fingerprint door lock upwards to activate the password input area.

2. Then enter the "Enter" key + "OK" key in the lower left corner to enter the administrator mode, basically the settings on the door lock are set in this administrator mode.

3. After entering the administrator mode, we will be prompted to enter the administrator password, and the initial password here is 123456

4. After entering the password, we see four options, select the "2" option, and set the user.

5. After entering the settings user interface, we can see three options, here we select the number "1" to add users.

6. After entering the add user interface, we see three options: add password, fingerprint, and magnetic card.

7. Enter the fingerprint (password) when you have 30 seconds after adding the fingerprint (password), you can enter the fingerprint (password), and finally it will prompt "Setup successful".

1. Initialization. First, we press the touch button on the motherboard to start initialization.

2. Enter your password. Press the "Add" key, "Enter the administrative password and end with ".

3. After entering the management password, enter the door opening password and press Confirm; Re-enter the door opening code and press Confirm.

4. Enter your fingerprint. Press the "Add" key and enter the "Manage Password ending in " after the prompt tone; Then press Fingerprint.

5. After the first input is successful, it will prompt "Enter Again", and then press the fingerprint again to enter successfully.

Enter the smart lock management mode to change the password.

Enter the smart lock management modeEach smart lock has a management password when it is initially purchased, and it enters the smart lock management mode first. Enter the password management function, enter the password management mode, and then press the "* key", and the smart lock will beep for a long time, which means that the password management function has been turned on. Enter the old password, turn on the password management function, enter the previously set user number in the input panel, enter it again, and then confirm, and then release your finger after hearing a long beep, at this time it will enter the link of intelligent voice reminder to change the new password.

You can also use pupil, face, and fingerprint recognition instead) to enter a new password, and under the prompt of the intelligent voice, enter the new password number you want to modify (the general password is 6 digits), and then confirm. If the user does not operate other modes after the change is completed, press the * button again or wait for 15 seconds to automatically exit the password management mode.

Smart door lock refers to a lock that is improved on the basis of traditional mechanical locks and is more intelligent and simple in terms of user security, identification and management. A smart door lock is an executive component that locks a door in an access control system.

The process of changing the password and entering the fingerprint is as follows:

1.Whether it is an upper slide fingerprint lock or a straight plate fingerprint lock, when changing the password or fingerprint, you need to wake up the touch screen first. Upper slide fingerprint lock, just push the slide open, the touch screen will be automatically woken up.

For the straight fingerprint lock, we need to pass the somatosensory sensing or press the wake-up button to successfully wake up the touch screen of the fingerprint lock.

2.To change the password or fingerprint of the fingerprint lock, we need to enter the management mode before we can choose to change the password and fingerprint column. Therefore, we only need to click the "*" in the lower left corner of the touch screen, enter the management password of the fingerprint lock, or open the door password +00, and press the " " button to confirm, and then we will successfully enter the management mode of the fingerprint lock.

3.If you want to modify the unlocking password or fingerprint information, you only need to select User Management under the management interface, and then select the fingerprint, password and card information according to the system prompts, and you can easily complete the modification of the fingerprint lock password and fingerprint.

4.If you want to change the management password of the fingerprint lock, you need to select the system management column under the management interface. And find the change management password item, enter the new password of 6-8 digits according to the system prompts, and successfully complete the modification of the fingerprint lock management password.

Here's how to set fingerprints for password door locks:

1. Enter the smart fingerprint lock management mode interface, press 1 and select "User Settings".

2. Enter the smart fingerprint lock user settings interface, press the "Add" button, enter the "Manage Password" and end with .

3. Enter the door opening password and press Confirm, re-enter the door opening password and press Confirm.

4. Press the "Add" button, and enter the "Manage Password ending in " after the prompt tone to start entering fingerprints.

5. After the input is successful, it prompts "Lose the bad envy again", and press the fingerprint again to enter it successfully.

Precautions for the use of fingerprint locks:

1. Smart locks can generally only use fingerprints to open the door, and the door opening button can only be pressed by hand, do not press the door with hard objects, and pay attention to protecting the fingerprint lock.

2. After the fingerprint collection window is used for a long time, there will be dirt on the surface, which may affect the normal use, at this time, you can use a soft cloth to wipe off the dirt.

3. When using the smart lock Hunger, do not use your hands to close and open the alarm sensor and password keypad. <>

1. First of all, open the slide of the smart fingerprint door lock upwards to activate the password input area.

2. Then enter the "Enter" key + "OK" key in the lower left corner to enter the administrator mode, basically the settings on the door lock are set in this administrator mode.

3. After entering the administrator mode, we will be prompted to enter the administrator password, and the initial password here is 123456

4. After entering the password code, we see four options, select the "2" option, and set up the inner user.

5. After entering the settings user interface, you can see three options, select the number "1" here to add users.

6. After entering the add user interface, we see three options to add password, fingerprint, and magnetic card, and select the number "2" to add fingerprint.

7. When there are 30 seconds after entering the fingerprint to add the fingerprint, enter the fingerprint capacity, put the fingerprint that needs to be entered in the fingerprint area, and finally it will prompt "set successfully".

Fingerprint door lock set password and fingerprint:1. Initialization. First, we press the touch button on the motherboard to start initialization.

2. Enter your password. Press the "Add" key, "Enter the administrative password and end with ".

3. After entering the management password of the shirt height, enter the door opening password and press the reading wheel to confirm; Re-enter the door opening code and press Confirm.

4. Enter your fingerprint. Press the "Add" key and enter the "Manage Password ending in " after the prompt tone; Then press the fingerprint behind the shed.

5. After the first input is successful, it will prompt "Enter Again", and then press the fingerprint again to enter successfully.

Fingerprint door lock set password and fingerprint:1. Initialization. First, we press the touch button on the motherboard to start initialization.

2. Enter your password. Press the "Add" key, "Enter the administrative password and end with ".

3. After entering the management password of the shirt height, enter the door opening password and press the reading wheel to confirm; Re-enter the door opening code and press Confirm.

4. Enter your fingerprint. Press the "Add" key and enter the "Manage Password ending in " after the prompt tone; Then press the fingerprint behind the shed.

5. After the first input is successful, it will prompt "Enter Again", and then press the fingerprint again to enter successfully.

Generally speaking, the password and fingerprint of the fingerprint lock can be set by the following steps:1First of all, according to the instructions of the fingerprint lock, install it and power it on.

2.To enter the setting mode of the fingerprint lock, Tongsou Travel can often enter by pressing a certain button on the fingerprint lock or swiping up the touch screen of the fingerprint lock. 3.

Choose to set a passcode or fingerprint function, which can usually be selected in the fingerprint lock's menu by swiping down on the touch screen or pressing the corresponding physical button. 4.Set a password, select the password setting option, enter the password input page, enter the password you want to set according to the prompts, and confirm to save it.

5.Set the fingerprint, after selecting the fingerprint setting option, follow the instructions of the fingerprint lock, press the finger and place it in the fingerprint identification area, let the fingerprint recognition system scan and read the fingerprint, and the input fingerprint is successfully recorded after a few times. 6.

After the settings are completed, exit the setting mode of the fingerprint lock and follow the prompts to initialize the fingerprint lock to take effect. It should be noted that when setting the password and fingerprint of the fingerprint lock, you need to ensure that the password and fingerprint settings are safe and reliable. In particular, avoid using weak password passwords as much as possible, and add a few alternate fingerprints in case you need them.

Summary. Dear, glad to answer for you! Fingerprint lock set password and fingerprint method:

First, press the word key to wake up the screen, enter the correct administrator password, and click confirm; Then, go to the settings page, find Add User and confirm; Finally, add a new fingerprint and repeat it once as required by the system, and the new fingerprint is added.

Dear, glad to answer for you! How to set the password and fingerprint for the fingerprint lock: First, press the word key to call the correct wake-up screen, enter the administrator password that is not confirmed, and click to confirm; Then, go to the settings page, find Add User and confirm; Finally, add a new fingerprint and repeat the morning cleaning according to the system requirements, and the new fingerprint will be added.

Exhibit information: Fingerprint lock introduction: Fingerprint lock is a smart lock, which is the perfect crystallization of computer information technology, electronic technology, mechanical technology and hardware technology.

The characteristics of fingerprints have become the most important evidence for identity identification, and are widely used in the fields of public security, criminal investigation and justice.

1. Factory initialization.

Press the touch button on the motherboard, and when you hear the prompt "Enter Initialization", start initialization, and there will be a prompt sound when the initialization is completed.

2. Enter the password to open the door.

Press the "Add" button, after the prompt tone, "Enter the management password, end with the sign"; After entering the management password, enter the door opening password, press the number key to confirm; Re-enter the door opening code and press the number button to confirm.

3. Enter the fingerprint of the door opening.

Press the "Add" button, after the prompt tone, "Enter the management password, end with the sign"; After entering the management password, press the fingerprint, after the first successful entry, it will prompt "enter again", and press the fingerprint again to enter successfully.

Smart lock teaching: how to add a fingerprint password setting method.