The e Surfing gateway router cannot be connected to the Internet after factory reset settings

What to do after a factory reset of router?

Hello, Tianyi gateway factory reset.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set it at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

In the Tianyi gateway.

On the device, there is a hole for reset. Press and hold for three seconds with something you can plug in to do a factory reset.

Finish. It can also be operated on a computer to win7 system.

For example, see the following steps:

1. Open a browser on the computer, then enter on **, and press enter to enter the Tianyi gateway landing page.

2. Then enter your account and password in the login window. Click Confirm to sign in.

3. If you don't know the account and password. Then you can look at the back of the Tianyi gateway device, where it is generally written.

4. Then click on the high track wheel level setting in the following settings page of the Tianyi Gateway.

5. Then click Reset Recovery under Advanced Settings.

6. Finally, you can see that there is a button to restore factory settings, and you can also restore factory settings by clicking on it.

The input of the gateway interface that jumps out of China Telecom Tianyi Modem may be due to the IP address conflict of the gateway interface, resulting in the jump to the e-Surfing Modem gateway instead of the router gateway.

Workaround:1Disconnect the router from the modem (modem, commonly known as the cat).

2.Look at the gateway IP address on the nameplate on the back of the router.

3.The system is connected to the router wifi.

4.Log in to the gateway IP address in the browser and open the gateway.

5.Go to the LAN port settings in Advanced settings.

Change the IP address of the gateway LAN port to avoid duplication with the modem. If set to.

1. First of all, you need to know the default terminal configuration address and the default terminal configuration password. You can tell from the label on the back of the wireless router. If you don't know the password, you can change it to the default password by resetting it (poke the reset hole with a pin).

2. Connect the wireless router (power supply checked) and the computer with a network cable.

3. Open the browser of your computer and enter the default terminal configuration address from the label in the address bar. Once you are on the page, enter the default terminal configuration password in the password field.

4. After entering the interface, click on the device type, and then click on the selected device. After the interface is displayed, offline processing and speed limiting processing can be carried out.

5. After entering the interface, click Advanced Settings, enter the original password and the new password to modify the terminal configuration password.

6. After entering the interface, click Advanced Settings - > Network Settings - > Wireless Settings in turn, and you can set the WiFi (change the WiFi password and strength).

Hello, 1. Check if there is any problem with the network cable. Some crystal connectors are not good, just change a network cable.

2. Use the cat directly.

Connect to a computer and try dialing. If you can explain that it's not a cat problem. Plug in the router and reset it to log in.

Precautions for the use of fiber optic modem:

1. Optical fiber can be bent at will like network cables, and optical fiber wiring is generally not allowed to take a 90-degree right-angle bend in the project.

Therefore, after the fiber arrives at home, do not bend it at will. If you look closely, you will find that the telecommunications construction personnel in charge will try to maintain a bend of more than 120 degrees at the corner of the house.

2. At present, there are two main types of domestic fiber-to-the-home access technologies: EPON and GPON, both of which belong to passive optical networks.

Unlike fiber-to-the-home a few years ago, there are no wall-mounted cabinets and switch equipment in the corridor, but a splitter that does not need power supply.

Substitute. EPON is developed from the IEEE network standard and is mainly used to carry network signals; The technical standard of GPON is ITU-T, which carries ATM frames, and the physical structure of the two devices is incompatible.

3. Because GPON itself can carry a variety of data services, many home landlines.

**It is also connected to the optical modem, if conditions permit, it is recommended to give the optical cat a 200 300 yuan home UPS, which can ensure that the landline communication is not affected after an unexpected power failure at home. Like the computer, the light cat should also be mainly heat dissipated, and it is not a good choice to put the light cat in an unventilated box or under the table.

Hello, it is recommended that you do not do a factory reset, after a factory reset, it will cause your broadband to not work normally. If you have any questions, you can call 10000.

2.Poke it with a needle-like object, don't let go, and keep it for 3s to restore the factory.

Telecom broadband modem factory reset is not available, generally need telecom installation and maintenance staff to set up to use, please log in to the telecom online business hall for details.

China Telecom Corporation is a large state-owned communications enterprise in China and a global partner of the Shanghai World Expo, and has been selected for many consecutive years"Fortune 500 companies"It is mainly engaged in comprehensive information services such as fixed **, mobile communications, satellite communications, Internet access and applications.

As of the first half of 2011, it had 100 million fixed users, 62.36 million mobile users (CDMA) and 61.74 million broadband users. The total assets of the group company are 632.2 billion yuan and the number of employees is 670,000. In May 2016, the first batch of "Enterprise Demonstration Bases" for entrepreneurship and entrepreneurship was launched. [1] In August, China Telecom Group Corporation was in"2016 China's Top 500 Enterprises"ranked 29th in the market.

2] On December 21, 2017, China Telecom officially issued an announcement that "China Telecom Corporation has completed the corporate restructuring". According to the announcement, China Telecom Group Corporation completed the corporate restructuring and went through the industrial and commercial change registration procedures at the Beijing Administration for Industry and Commerce on December 15, 2017. After the change, the enterprise type of China Telecom Group was changed from an enterprise owned by the whole people to a wholly state-owned company.

The name of the company was changed from "China Telecom Group Corporation" to "China Telecom Group ****".

The Chinese name of "Tianyi" is intuitively related to flight, wings, and sky, reflecting a free and easy mobile experience and broad coverage; "Tianyi" and "Tianyi" are homophonic, which means that users can experience mobile information services more freely and enjoy a new life of higher quality and freer information after using China Telecom's mobile services. "Tianyi" is a brand born for China Telecom to develop 3G business, which was first endorsed by Deng Chao to promote its healthy, high-speed, convenient and wireless 3G network to the majority of mobile phone users, so as to introduce and choose CDMA2000 as the 3G network of the network standard to customers.