How to set up a router for e Surfing broadband home gateway?

Hello, the method of changing the wifi password of Tianyi gateway is as follows:

1. First, check the background address and login account password of the gateway.

2. Open the computer browser and enter the login address of the gateway, as well as the login account and password in the address bar.

3. After logging in, select WiFi settings.

4. Then enter the new password in the password field, and finally click Save.

The first thing to do is to make sure that your fiber modem is not dialing up the Internet directly.

If it's direct, let the broadband master change it to the bridging mode for you, and you can use the wireless router.

1.First, use a network cable to connect the LAN interface of the wireless router, connect the other end of the network cable to the computer, open the browser on the computer, enter the setting interface of the wireless router, find the LAN address IP, and modify it to prevent conflicts with the fiber modem. How do I connect a fiber optic modem to a router, connect a network cable from the fiber modem, and connect the other end of the network cable to the WAN interface of the wireless router?

I am looking for a network cable to connect to the LAN interface of the wireless router, and the other end of the network cable is connected to the computer3Open the browser on your computer, enter the settings interface of the wireless router, find the WAN option, set the type of Internet access: PPPoE dial-up, enter your broadband and password, and save it.

Home Internet access, whether it's a computer or a router, is usually acquired automatically.

DNS address.

As for the network management, there is no need to set it up.

This setting is used only if the organization, assigned an IP address. ’

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Tianyi gateway is your optical modem, to add a router to the optical modem, i is actually very simple. If there is a network cable, one end is connected to the WAN port of the router, and the other end is connected to any LAN interface of the optical modem, and the connection is completed. Turn on the power of the router, in fact, it can already be used for normal wireless Internet access, but at this time, the router's wifi network does not need a login password, and everyone can connect.

So, the last step is to enter the router's settings interface, set the wifi password, and you're all done. The above information is for reference only, gigabit in the city, C-position debut. 5G dual gigabit**, 1000M broadband, 60G traffic for the whole family, details can be found in Guangxi Telecom's online business hall.

Customer service number 68 is the answer.

The method by which the wing gateway is connected to the router.

Refer to the following:1The LAN port of the router is connected to the LAN port of the Skywing gateway via a network cable. Since the network is connected through a gateway, it is connected to the LAN port of the router channel, not the WAN port;

2.Enter the login address of the wireless router in the browser to log in to the login page of the router background management;

3.Select "Route Settings" and click Enter;

4.Since network broadband is logged in at the gateway, the router does not need to set up a broadband connection. Just set up the wifi directly.

5.Turn on the wireless function, set the wireless name and password;

6.Finally, save and complete the setup of the router, as shown in the following figure.

1. Do not connect the network cable of the telecom Tianyi broadband home to the router first.

2. Use a network cable to connect any LAN port of the router at one end and the network card of the computer at the other end.

3. Log in to the interface through the computer browser and click on the LAN port settings as drafted.

4. Change the LAN port IP to avoid conflicts with the router IP segment of e-Surfing Broadband;

5. Click on the WAN port settings, and select the WAN port Internet access mode: dynamic IP connection.

6. Click DHCP Server Settings to enable DHCP server.

7. Click on the wireless settings, the settings and key under the interface, and it is recommended to add the @ character to the password so that others can not rub the network.

8. Click Save to exit, and the router will automatically restart. The network cable of the telecom Tianyi broadband home is connected to the WAN port of the router, and the computer can access the Internet at this time.