How to build a construction elevator? How does the construction elevator operate?

Upstairs is already very detailed, be sure to install an overload limiter and a floor caller for your construction elevator, which can not only facilitate construction and improve efficiency, but more importantly, it is safer Construction elevator overload limiter, choose Beijing Hengmei***, **low, the most professional! Be your go-to brand!

The construction elevator should first choose a good location, do a good job of the elevator foundation, and at the same time do a good job of attaching the wall in the process of erection. This has corresponding elevator foundation drawings, which should be erected and disassembled by professionals.

<> first step: find the elevator entrance, after arriving at the elevator entrance, press the button, if you go upstairs, press the up button, if you go downstairs, press the down button, after the button lights up, wait for the elevator mouth to open. Step 2:

Enter the elevator, select the floor you want to go to, each number represents the number of floors, how many floors you want to go to, press the corresponding number button, wait for the elevator door to close automatically, or press the button to close the elevator door. Step 3: After reaching the designated floor, the elevator door will automatically open, and you will reach the floor you want to go to when you go out.

The above riding method is suitable for common residential passenger elevators, if it is the escalator of the shopping mall, as long as you stand up, wait until you reach the upper floor and walk down the elevator, if you want a higher floor, the same way to transfer to the elevator that moves to the higher floor.

The construction elevator is generally set up in a position with the following conditions to operate: 1. It is convenient for the entry and exit of material transportation, and a more spacious room is selected in the floor layout to let the sleepy person be used as the entrance and exit. 2. The site outside the construction elevator should be as spacious as possible, and there should be a construction channel.

3. It is generally located in the middle of the house plane. 4. It is convenient for the construction personnel to go up and down. Steinyan Niangong elevators are often referred to as construction hoists, but construction hoists include a broader definition, and construction platforms also belong to the construction hoist series.

Man-carrying and truck-carrying construction machinery often used in construction, due to its unique box structure makes it comfortable and safe to ride, construction elevators are usually used with tower cranes on the construction site, with a general load capacity of 1-3 tons and a running speed of 1-60m min.

<> "Elevator Construction Strategy".

1. Is it normal for the elevator shaft to rain and enter the water?

This phenomenon is abnormal, it is very easy to cause safety accidents such as electric shock, and it may damage the elevator electronic board in serious cases. If you encounter this situation, you must immediately notify the management office to cut off the power supply, and then contact the elevator maintenance company, so that it can arrange professionals to deal with it, and confirm that the problem is solved before continuing to use.

If the elevator shaft is flooded, there will be water accumulation at the bottom of the pit, which will cause an electric shock accident and endanger the safety of passengers. At the same time, it will also accelerate the aging speed of the elevator pit, so that the elevator can not operate normally, such as the door opening is not flexible, it is easy to cut the passengers, or cause rock dust accidents such as falling ladders.

Second, the elevator precautions.

1. When we set up the elevator, we should design the elevator according to different occasions, if it is an elevator in a shopping mall, try to set up a larger space, can carry a little more people, if it is a community, you can choose a little smaller, if it is a self-built elevator at home, then the number of people that can be carried is less than 5 people, so as to ensure the normal operation of the elevator and the safety of the jujube change.

2, the dry passengers in the elevator, each gap can not be dry six millimeters, in the construction of the dry freight elevator clearance can not be dry eight millimeters, by the dry wear gap allowed to reach ten millimeters, but can not exceed ten millimeters, the rest of the words, we must make a reasonable measurement of the dry concave bottom, and to reasonable maintenance of these faults, maintenance must show warning signs, so as to inform the outside personnel, the elevator is being repaired, to prevent accidents.

Villa elevator construction steps:

1. Erection of elevator shafts.

The hoistway adopts a full sightseeing elevator structure, and the top of the elevator shaft adopts a glass top cover. At present, there are three common types of home elevator structures on the market, namely hydraulic elevator structure, traction elevator structure, and spiral elevator structure. No matter which type of home elevator the owner chooses, high-quality installation and construction and after-sales service are indispensable.

It should be noted that the villa home elevator also puts forward higher requirements for the elevator shaft in terms of safety protection. In particular, if there is a sudden power outage or malfunction in the use of the elevator, it is necessary to pay special attention to the safety aspect of the family.

2. Installation of the internal car of the elevator.

Since the elevator of the home villa is only for the use of family members, if you want to install the elevator, in addition to the elevator service provider, it also involves a number of projects such as civil engineering and internal waterproofing. Because the elevator is a full sightseeing elevator, a large number of transparent glass materials are used, and most of the hard decoration of the villa is ready, and a lot of soft furniture has also entered the site. The pure white home space is equipped with an elevator, which is very textured.

3. Elevator interior car decoration.

Good design is important, but it also plays a role in standardizing construction. If there is a lack of solid craftsmanship, the quality of construction cannot be guaranteed. It is best to adopt the machine room-less home elevator structure, so as to save the construction cost and construction space to the greatest extent.

Fourth, the elevator is regularly maintained.

Villa home elevator can not lack regular maintenance, regular maintenance is through the operation of some parts of the equipment for detailed inspection, repair, replacement, adjustment, so that the inspected parts to meet the necessary standards, fundamentally to ensure the internal quality of the equipment.

Summary. The process of installing elevators in old buildings.

First of all, the design unit surveys the site and conducts a residents' meeting to discuss the preliminary design plan; Secondly, the district additional ladder office for the first instance, and the first person will hand over the relevant information to the community for preliminary examination; Finally, the pre-approval publicity, cost decomposition and layout objection, selection of the general lead unit, signing of the ladder increase agreement and declaration of planning permit and receipt of the certificate.

The construction process of installing elevators in old buildings.

The process of installing elevators in old buildings is first of all surveyed by the design unit, and the preliminary design plan is discussed at the people's meeting before Juxiao; Secondly, the district increase ladder office for the first instance, and the relevant information will be handed over to the community for preliminary examination; Finally, the pre-approval publicity, cost decomposition and layout objections, the selection of the general lead unit, the signing of the ladder increase agreement and the declaration of the planning permit and the receipt of the certificate.

What conditions need to be met for the installation of elevators According to the guiding opinions: the installation of elevators in old buildings should meet the five conditions of the mu at the same time: 1

Within the scope of cities and towns, residential buildings for use in the liquid room shall be built in accordance with the law; 2.non-unitary title; 3.Not included in the scope and plan of housing expropriation; 4.

The building height is 4 storeys or more; 5.The structure of the house is built to meet the safety regulations.

Summary. Hello! Glad for your question.

Construction process of installing elevators in old buildings: Residents apply voluntarily: Residents apply to the neighborhood committee of the community where they are located.

Neighborhood committees report to the neighborhood: The neighborhood committee submits residents' applications to the neighborhood where they are located. The street is reported to the District Housing and Urban-Rural Development Committee:

The sub-district submits the residents' applications to the District Housing and Urban-Rural Development Committee. Survey site: The District Housing and Urban-Rural Development Commission entrusts the implementation of the main body to investigate whether the site meets the installation requirements.

The above-ground part of the site, such as the reconstruction of green space, the site environment, and the relocation of underground pipelines, shall be coordinated by the neighborhood committee and relevant units.

Hello! Glad for your question. The construction process of installing elevators in old buildings.

Voluntary application by residents: Residents apply to the neighborhood committee of their community. The neighborhood committee is sent to the street vertically

The neighborhood committee submits the resident's application to the neighborhood where it is located. The street reports to the District Housing and Urban-Rural Development Committee: The street submits the residents' applications to the District Housing and Urban-Rural Development Committee.

Survey site: The District Housing and Urban-Rural Development Commission entrusts the implementation of the main body to investigate whether the site meets the installation requirements. The above-ground part of the site, such as the renovation of green space, the site environment, and the relocation of underground pipelines, shall be coordinated by the neighborhood committee.

Why is the installation of an elevator publicized, and how to construct it if it is not publicized in the future.

Publicize first, and then solicit the opinions of relevant owners (stakeholders), and only after passing can construction be carried out.

Application process (1) Formulate a plan for the installation of elevators in old residential buildings that meet the relevant specifications and standards such as architectural design, structural safety, fire safety and special burial and collision preparedness. (2) The agreement shall be publicized and signed after the consent of the relevant owners to sign the elevator installation agreement, and the agreement shall clarify the main responsibilities of the project leader or the entrusting unit, the estimated capital budget and the cost raising plan, the elevator operation and maintenance cost sharing plan, and the elevator use management unit after the completion of the installation. The above agreements and plans will be publicized for 10 days at the entrance of the building to be installed in the elevator unit, the public notice board of the community, etc.

3) After the construction drawing review design plan is fully negotiated and publicized by the owner, the applicant entrusts the design unit with corresponding qualifications to carry out the construction drawing design according to the reconstruction project. After the construction drawings are reviewed by a qualified drawing review agency, they are reported to the construction administrative department of the district for the record. (4) The applicant for joint examination shall submit an application to the Housing and Urban-Rural Development Bureau for the installation of elevators, and provide relevant materials.

According to the "Implementation Opinions on the Installation of Elevators in Old Residential Buildings in the Central Urban Area of Jingzhou", the Housing and Urban-Rural Development Bureau, together with the Natural Resources and Planning Bureau, the Market Supervision and Administration Bureau, the Urban Management Law Enforcement Bureau and other departments within its jurisdiction, as well as the relevant pipeline units, will conduct a joint review and issue a joint review opinion.

Before construction, a building is announced.

Construction in the community must be publicized. Because there is a certain danger in the construction of tung bent fiber in the imitation of the community bureau, especially in the community with residents. Therefore, there must be a formula, in which the main unit of construction, the purpose of construction, the time of construction, and the way of construction should be clarified.

In order to prevent construction tools from causing harm to residents in the community, construction areas should be set up and fences should be set up.