How to deal with the forklift bucket if it can t be recovered

Determine whether it is a hydraulic problem or a structural problem, and see if the bucket is turned over at the bottom and touches the boom, pinned?

First, if it is a hydraulic problem, it is that the valve core on the multi-way valve is stuck, and there are 3 pressure valves on it.

Large cavity overload valve, small cavity overload valve, and main safety valve.

Try moving the valve.

Second, the car is empty, and the engine is idling.

If you get up, it means that the rope is good, and then increase the throttle normally, the hydraulic oil.

And the mailbox filter is good, exclude.

Third, in the bucket full of things, or engine idling, this is OK to get up the working pump is good, there is a problem with the multi-way valve, can not get up, change the working pump, elimination.

Fourth, the car is very good on the ground, start the car, idle down the lower arm, the front part of the car is lifted, you can eliminate the pump at the time, otherwise, the pressure relief valve of the multi-way valve is broken.

You first see if the hydraulic belt is loose, if it is not loose and the forklift is strong forward and backward, it is a problem with the oil rod assembly or distributor. If you want to be simple. Both were changed.

I guess you're a problem with the assembly, the so-called assembly is weak, that is, there is something like a fan in the assembly, and the wear is serious.

Summary. Hello dear, here are the answers I have put together <>

Generally, there are the following reasons why the bucket of the forklift cannot be recovered: 1. Oil leakage or loss of hydraulic oil: If the hydraulic oil of the forklift leaks, the pressure in the hydraulic oil system will become smaller, so that the bucket cannot be closed.

2. Hydraulic oil pump failure: The hydraulic oil pump is the main component of the forklift bucket, if the hydraulic oil pump fails, the bucket will be affected, resulting in the bucket can not be recovered normally. 3. Blockage of hydraulic cylinders

The hydraulic cylinder is an important part of the hydraulic oil system, if the oil circuit inside the hydraulic cylinder is blocked, the flow of the hydraulic oil will also be affected, thus affecting the action of the bucket. 4. Lack of hydraulic oil: If the hydraulic oil is missing due to oil leakage or other reasons, the pressure of the hydraulic system will also be reduced, resulting in the bucket can not be recovered normally.

The above are the common reasons why the forklift bucket cannot be recovered, and only by completely solving these problems can we ensure that the forklift bucket can be recovered normally.

Why can't the bucket of the forklift be recovered?

Hello dear, here are the answers I have put together <>

The bucket of the forklift can not be recovered, and there are generally the following reasons for the slag pin: 1. Hydraulic oil leakage or loss: If the hydraulic oil of the forklift leaks, the pressure in the hydraulic oil system will become smaller, so that the bucket cannot be closed.

2. Hydraulic oil pump failure: The hydraulic oil pump is the main component of the forklift bucket, if the hydraulic oil pump fails, the bucket will be affected, resulting in the bucket can not be recovered normally. 3. Blockage of hydraulic cylinders

The hydraulic cylinder is an important part of the hydraulic oil system, if the oil circuit inside the hydraulic cylinder is blocked, the flow of hydraulic oil will also be affected, thus affecting the action of the bucket. 4. Lack of hydraulic oil: If the hydraulic oil is missing due to oil leakage or other reasons, the pressure of the hydraulic system will also be reduced, resulting in the bucket can not be recovered normally.

The above are the common reasons why the forklift bucket cannot be recovered, and only by completely solving these problems can we ensure that the forklift bucket can be recovered normally.

The forklift boom can not be retracted when it rises to the highest bucket, and the boom is not retracted freely when it is not retracted to the highest bucket.

Hello dear, here are the answers I have put together <>

Generally, there are the following reasons: 1. Deformation in the hydraulic cylinder: The deformation inside the hydraulic cylinder will affect the flow of the hydraulic system, resulting in the inability to retract the punch normally when the bucket is retracted and released.

2. Bucket collection wire rope breakage: Bucket collection wire rope fracture will also affect the bucket collection action, resulting in the bucket collection can not be recovered normally. 3. Hydraulic oil pump failure:

The hydraulic oil pump is the main component of the forklift bucket, if the hydraulic oil pump fails, the bucket collection will be affected, resulting in the bucket collection can not be retracted normally. 4. Hydraulic oil leakage or loss: If the hydraulic oil of the forklift leaks, the pressure of the slag pin in the hydraulic oil system will become smaller, so that the bucket cannot be closed.

The above is the common reason why the forklift boom bucket is not as good as the judgment to swim back, and only by completely solving these problems can we ensure that the forklift bucket can be recovered normally.

I mean that the big arm rises to the highest point and the bucket can't be retracted, and the big arm doesn't reach the highest point and the bucket is free.

To the highest point where the mechanical parts are stuck, you can try to put some lubricating oil on the pro.

It can't be that the pins are too worn.

It is possible to be pro.

Summary. The reason why the forklift does not retract the shovel is on the distributor, check whether the flexible shaft cable of the shovel head is broken. If it is not replaced, the valve that controls the shovel head in the front section of the distributor is stuck, and the pin of the shovel head is too worn.

After the forklift bucket is unloaded, the bucket can't turn over and is stuck in **, how to deal with it.

Hello, my forklift can rise up and down, and the small column of the dispenser can not be turned over before and after is not up, and it is a one-shot operation.

Dear, hello, I'm glad to answer for you, after the forklift shovel tells the bucket to unload, the bucket can't turn back, stuck in which section of the side, the treatment method: raise the boom high, and then collect the bucket, is to raise the boom after the bucket is confiscated and the bucket is directly lowered The boom is stuck, this is to beat the butter less, and the bucket pin iron plate is welded at the limit to solve the problem of stopping the fire. I hope this service can help you, thank you for your consultation, and I wish you all the best!

The reason why the forklift does not retract the shovel is on the distributor, check whether the soft shaft cable of the shovel head is broken. If it is not replaced, the valve of the front section of the distributor to control the shovel head is stuck, and then there is the hall touching the shovel head The pin is too worn, which may also cause this reason to be noisy.

The forklift bucket cannot be retracted, mainly because the unloading angle of the bucket has far exceeded the design value, so this situation occurs. The small forklift is from the large cover type forklift mechanical execution system function analysis, Lu and Hao on the forklift machinery for innovative design, the agricultural tractor design for practical small forklift, divided into 06, 08, 10, 12, 15, 18, 20, different models to meet the needs of small and medium-sized construction shed enterprises.