All kinds of questions about the eight hole G flute

If you have any questions about the eight-hole G flute, I will provide you with some of the answers below:

First of all, the structure of the eight-hole flute. The eight-hole flute has seven articulation holes on the front and one articulation hole on the reverse. When the player's left hand is on the top and the right hand is on the bottom, the front is called the first hole, the second hole, and the third hole from 、......bottom to topThe seventh hole, the eighth hole is pressed by the thumb of the left hand on the reverse side.

Then, the fingering of the eight-hole flute. For the fingering of the eight-hole flute, it can be summarized as follows: The fingering of the low, middle and high tones is basically the same, but the airflow is different; The mid-to-high fingering of 1 7 is basically the same, except that the airflow is slow; The bass is "slow", the midrange is "normal", and the treble is "overblown". Specifically, for example, the fingering of bass 5 is full press, and the airflow blows slowly; The fingering of bass 6 is to open only the first hole, and the air flow is slow; The fingering of bass 7 is only one or two or three holes, and the air flow is slow; And so on.

Finally, air tremor and laryngeal abdominal tremolo. Both of these are flute playing techniques that are used to enhance the artistic effect of a piece. Among them, the air tremor sound is achieved by the sound wave generated by the method of alternating the void and the real airflow.

Laryngeal abdominal tremolos, on the other hand, rely on a combination of the powerful expansion of the larynx and the vigorous upward support of the abdominal breath to make the breath vibrate.

The hole is counted from the bottom up 1234567 behind is the 8th hole. Scale from low to high: 5 (a little below, "bass sao"):

7 (low): only open one, two, three holes. 1：

Open only one, two, three, four holes. 2: Only press six, seven, eight holes.

3: Press only the eighth hole. 4：

Treble 1 7 (a little below): The fingering is the same as the alto 1 7, but the air flow is different and the air flow is different, and it is overblown. To sum up, it is not difficult to find that the fingering is regular and does not have to be memorized.

The low, mid, and high pitches are basically the same as the rules as follows, except that the airflow is different; The mid-to-high fingering of 1 7 is basically the same, except that the airflow is slow; The bass is "slow", the midrange is "normal", and the treble is "overblown".

The hole of 152 is 1 tone, the hole of 234 is 2 tones, and the hole of 968 is 3 tones.

The hole of 152 is 1 tone, the hole of 234 is 2 tones, the hole of 968 is 3 tones, sorry, I don't have time, woo woo.

According to the fingering of the eight-hole flute, it can blow from bass 5 to super treble 1, I have a fingering table here to see how to send it to you.

I shouldn't say which one is better, only that the one is more suitable for beginners.

Beginners are the first choice for G flute, the maximum effective tube length, moderate finger distance, comfortable to press the hole, and no effort to blow;

The effective tube of the f-tuning flute is long, which is laborious for beginners, the pitch is not easy to grasp, and the finger distance is relatively large, which is not easy to hold.

If you want to study and study systematically and deeply, it is recommended to choose an 8-hole flute, which is convenient for transfer;

If you just play, 8 holes and 6 holes will do, but 6 holes will be pressed.

1. In the second hole, it is a bit difficult to press the hole and hold it, and the 8-hole flute is relatively comfortable, but even so, beginners still have to practice to get used to it for a while.

The same flute making technician uses the same materials and processes to make 6-hole flutes and 8-hole flutes respectively, and the 8-hole flute** is relatively high, but not too high. Beginners can buy a G flute of tens of yuan to more than 100 yuan, and there is no need to force the timbre first, but to ensure the intonation, and when the level is improved, it is not too late to buy the F flute if you need to.

6 holes I blow 8 holes, I don't think there is much difference;

Beginners, you can learn 8 holes first, if the fingers are not long, it is easier to hold down, and the 6 holes are far away from the holes, I am afraid that you can't hold it;

G is brighter, F is lower, choose G for beginners, and then blow F when the breath is better.

If your lung capacity is large enough and your fingers are long enough, it's okay to buy F8 holes for beginners, anyway, I don't think there's much difference, I usually buy a few different tunes at a time to play with.

What's not too much of a tune, it's mainly for adapting to the accompaniment, eight-hole it.

The timbre of the blowing must be lower in the F key, which is more suitable for Xiao's music, but girls definitely can't use it, and boys can't use it if their fingers are short. This can't be helped, unless you can press with the tip of your second finger, and it is recommended that you do not want to.

.Generally speaking, the flute has a barrel sound to do 5 2 1 6 four fingerings, the first two are the most used, so most of the learning flute is from the tube.

Tone 5 begins. Beginners will learn at least two fingering techniques, 5 and 2, and you'll gradually get a sense of it.

Any tune of the flute can be fingered with a tube tone such as 5 and 2.

Learn two fingering techniques, you can blow G and C with a G flute, and then you can blow F and B flat with an F flute, a total of four keys of G, C, F, and B flat, what a good thing!

I play the flute, and I started learning the 8-hole flute in the second half of last year. During this period, I was firmly attracted to the shakuhachi on the Internet, and then learned to make my own shakuhachi

Playing shakuhachi. I played the 8-hole Tang shakuhachi, the volume is bigger than the flute, and the timbre is more bold than the flute, which is too attractive.

Forehead. I'll take it one by one.

1.It will be difficult to learn on your own, especially in some mouth fingering and so on. It is recommended to find a teacher to learn, but self-study is not impossible, self-study textbooks recommend the version of Mr. Zhang Weiliang and Mr. Wang Tiehammer, Mr. Zhang Weiliang also has teaching on the Internet**, free, there is it in Youku, it is good to follow step by step.

2.When fully blocked, it becomes a cylinder tone. The tube tone is more difficult to blow for three reasons, 1

The mouth wind is not tight, and the mouth wind of beginners is generally not well controlled. 2.Doesn't press it firmly.

Pay attention to the ring finger of the right hand, the ring finger of the right hand is easy to loosen when blowing the sound of the pipeThe biggest reason why it is difficult to have the same tone is that the airflow is not well controlled, and when the finger is held down, it can blow 4 kinds of sounds, which are the low tone 5, the middle 5, the high 2 (overtone) and the high 5...Self-study is generally difficult to master, and a large part of the reason why you are advised to find a teacher is here.

3.Note that there are 4 points, 1Distinction:

Slow blowing, super blowing, sharp blowing, this is very important! is the foundation. Mr. Zhang's book makes it very clear.

2。I don't know if you've ever practiced long tones, but it's also very important, and if you want to play well, long tones are fundamental. There is no way to speculate, only constant practice, and a moderate amount of physical activity can help.

3.Finger dexterity. 4。

Skill. Finger dexterity exercises can help with technique, but it is not advisable to practice technique too early.

4。If the hole where the big finger of the left hand is located is 8, the hole of the index finger is 7, the middle finger is 6, the ring finger is 5, the index finger of the right hand is 4, the middle finger is 3, the ring finger is 2, and the little finger is 1.

5: 12345678 all in one.

6:234568 close, 1 open.

7:245678 close, 1,3 open.

1: 25678 he, 134 open.

2: 2678 he, 1345 open.

3: 168 he, 13457 open.

4: 2567 he, 1348 open.

You have 4 questions. There's a whole lot of each answer, what's the matter? Brothers! Therefore, when you ask questions, you must ask more specifically, the center is prominent, only ask 1-2 at a time--- naturally there will be many masters of flutes and flutes, and they will give very good.

In addition, I remind you to also pay attention: you should concentrate on learning the flute, learn one item first, and don't expect to learn everything quickly, it is impossible to succeed! You have to focus on one difficulty at a time in order to fly!

You can also search for the famous teacher in the flute ruler** world on the Internet: Xi Xiaolin, **ask him for advice!

The eight finger holes are fully closed, which can be blown completely, and this fingering can produce the lowest sound of this hole flute, that is, the "cylinder sound".

The reasons for the inability to pronounce are analyzed as follows:

1.Objectively, the instrument may not be very well made, and there is a possibility of air leakage.

2.Subjectively, the instrument is not necessarily bad, but beginners often do not press the holes tightly, or the mouth tone is not quite correct, resulting in the inability to blow.

I don't know what the landlord means when he says "d, r, m, f".

The order of the finger holes is from bottom to top, as "first hole" and "eighth hole".

G must be engraved on the fifth hole from top to bottom (or the fourth hole from bottom to top), and when you say "fourth hole from top to bottom", you must not count the hole on the back (the eighth hole).

You can try this method by closing the eighth hole first, opening the remaining seven holes, and then closing the seventh to first holes in turn until the sound of the cylinder is blown.

Let's find a feeling.

Follow his tutorials and methods to practice step by step and figure it out for yourself.