What to do if the 10 year old Elantra burns a little bit of engine oil

There are four common reasons for Elantra engine oil burning.

1.If you don't clean the oil circuit for a long time or don't do effective oil circuit cleaning, detergents are used at will, and using detergents and effective detergents are two different things;

2.The antifreeze replacement cycle is too long or not changed at all;

3.The oil change interval is too long;

4.Long-term or often short-distance driving.

The above four points of the vehicle that burns engine oil must be occupied by one or three points.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., are directly or indirectly related to the formation of carbon deposits, so keeping the fuel circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality (PNF) fuel additives.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. Burning engine oil is caused by the following factors, as long as the following problems are solved, burning engine oil can be solved.

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem. In the past, the problem of burning engine oil could only be solved by dismantling and repairing, but now there is a plan to solve the problem of burning engine oil without dismantling and repairing, which can be understood by taking a look.

The main reason for burning engine oilThere is a problem with the fittings, the wastegas valve, the valve seal, the cylinder is pulled in the cylinder, and the cylinder pressure is insufficient.

If the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the oil life cycle is too long, the piston ring is stuck, and the more common situation is that the piston ring is stuck.

What is piston ring seizureStagnation starts from the oil circuit, the oil bears the temperature at 110 degrees, and the high temperature caused by the long-term unclean oil circuit makes the oil at a temperature of 120 degrees or higher for a long time, so that the oil will fail in advance, the small hole of the oil ring is very small, and the oil inside will be dried and scabbed for a long time, and a cylinder stuck is a liter of oil for 5000 kilometers, at this time, the working conditions of other cylinders will also begin to be bad, and soon the 4 cylinders are stuck, and it will become a liter of oil for 1000 kilometers or even hundreds of kilometers.

SolutionAt present, there are two methods on the market to solve the problem, one is overhaul, and the second is PNF repair agent. In the case of overhaul, the cost is very high, the vehicle depreciates quickly, and the later run-in is also very troublesome. I've seen riders repair it with PNF repair agent before, you can refer to it.

1. The choice of engine oil

Engine oil is essential for a vehicle's engine, not only to lubricate, but also to clean, cool, prevent rust, seal, and more. If the vehicle has a slight burn of oil.

The use of better quality engine oil can be effective in relieving the situation.

In addition, too low or too high oil viscosity will cause poor engine lubrication, increase the wear of piston rings and cylinder walls, and reduce sealing performance, which will burn the engine oil.

2. Choose oil with high viscosity for old vehicles

Increasing viscosity oils, such as 10w-40 or even 10w-50, these viscous oils can increase the tightness of the cylinder. This can not only increase the power a little, but also alleviate the situation of slight oil burning in old vehicles.

3. The choice of cavity and disadvantage filtration

The oil filter must be of guaranteed quality, because the main function of the oil filter is to remove impurities such as dust, metal particles, carbon precipitates and soot particles in the oil to protect the engine.

If the quality of the filter is not up to standard or the oil filter is clogged, there is a high risk that impurities will repeatedly wear and tear the engine while it is working, which will lead to increased oil consumption. A good filter can clean the inside of the engine, save fuel, reduce emissions, and also have an effect on reducing the exhaust temperature of the engine, which can reduce oil consumption and oil burning problems.

4. Add high-quality gasoline

After the additives in gasoline are oxidized, they will form a gelatinous substance, which will be burned in the intake valve, piston top, piston ring groove, combustion chamber, and spark plug after entering the combustion branch circular chamber through the fuel injector.

and other parts form carbon deposits.

Exacerbate the aging of these parts and cause the burning of engine oil. Therefore, the choice of better quality gasoline can reduce the phenomenon of burning engine oil.

5. The vehicle maintenance cycle is stable

The maintenance cycle of the vehicle is formulated according to the normal driving condition of the car, and the vehicle with poor use conditions should shorten the maintenance cycle and the specified kilometers according to the actual situation.

6. Avoid long-term high-speed driving

When the engine rotates at ultra-high speed, it is easy to break the lubricating oil film, resulting in poor lubrication and dry grinding of the rotating parts, and when it becomes a regular operation, it will make the engine wear abnormally and burn the oil, therefore, maintaining an economic speed is a good way to prevent the phenomenon of burning oil.

Hello, if you find that the oil is burned, it is recommended to go to the repair shop to do an inspection first. There are generally two kinds of engine oil: one is that the cylinder is strained or worn, and the piston ring is worn.

Modern cars generally have this problem, there are engine protectors sold on the market, you can use it to try, according to the slight situation you said, it should have an effect. If you still can't laugh, try to find the reason:

1.Oil leaks into the cylinder from the valve. This situation is generally caused by the loose sealing of the valve oil seal, and the solution is to replace the valve oil seal, if the valve guide is seriously worn, the valve guide or even the valve should be replaced.

2.Caused by leakage of cylinder piston rings. For example, the oil ring scraping capacity is reduced, or the air ring is leaking, resulting in too high lifting grip pressure in the crankcase, and the large airflow through the crankcase ventilation will bring too much oil mist into the intake pipe.

Causes oil to burn. When this situation is mild, the ring can be changed, and when it is severe, only the piston group (including the piston ring) can be changed.

There is a specialization in the art industry, and it is more reliable to find a professional person for professional things. Go to a 4S shop or auto repair manufacturer to find a master in this area to help you diagnose, and then take maintenance measures to avoid detours.

There are two ways to solve the problem in the market before burning engine oil

Overhaul. PNF restoratives.

Benefits of this one:In the case of overhaul, the cost is very high, the vehicle depreciates quickly, and the later run-in is also very troublesome. First of all, you have to find out the reason for your burning oil, oil circuit blockage, carbon deposits, piston ring stagnation can be repaired with repair agent.

Not a major overhaul to solve the problem of burning engine oil.

Summary of various types of engine oil burning and solution of square bending and combination.

Modern car oil burning place must be repaired in time to prevent the failure to expand the silver ridge, burning engine oil is the piston oil seal wear, piston cylinder wear and valve and valve shaft seal wear and tear, to the 4S shop or repair shop to pick up and repair on the grinding can do, early repair replacement parts can reduce the maintenance cost.

There is a problem with the oil burner, so fix it quickly.

Hello, Beijing Hyundai Elantra This car does not have any signs of burning engine oil, and you can buy it normally.

If there is a problem with burning engine oil in this car of Hyundai Elantra, you can check whether it is caused by a problem with the piston ring.

Hello, this car has the phenomenon of burning engine oil, if it is slight, you can change to a high viscosity oil to try the effect.

Hello, if you are burning engine oil, check whether the viscosity of the oil is appropriate, and the other is the problem of piston rings and oil seals.

Hello, if the engine burns oil slightly, you can prepare some oil, check and add it every 2,000 kilometers, if the oil burns seriously, you need to repair the engine, and the overhaul engine can be restored to normal.

If the car burns oil, this is to check whether the valve oil seal is aging, check the oil burning caused by serious wear of the piston ring, and if the oil is more serious, it must be overhauled.

Hello, if it is a slight burning of engine oil, you can increase the viscosity of the oil, if it is more serious, it is generally a piston oil ring or valve oil seal problem, you need to repair the engine, I am happy to answer for you!

If the Elantra car burns oil, it is recommended that the piston and piston rings and other parts be replaced in the shop.

Hello, the general oil burner is the engine or piston rings and so on need to be repaired, this is recommended to go to the repair shop for timely maintenance.

Hello, the car burns engine oil only to go to the repair shop to detect where there is a fault, generally to replace the four sets or something.

Hello, if the car burns oil seriously, it needs to be overhauled, the engine needs to be replaced, the valve oil seal and the piston ring and the like.

If the oil is slight, you can change a little thick oil, such as the 40 model, to see the effect, and then you need to replace the piston three-piece set.

Generally speaking, if the car burns engine oil, it is best to go to the 4S shop to carry out all the maintenance, and do a major maintenance.

In this case, it is recommended to check and repair the repair shop in time so as not to affect the overall safety performance of the vehicle.

Now there are engine protectors on the market, you can use them to try it, and if it doesn't work, try to find out why.

The reasons for burning engine oil are:

1.Oil leaks into the cylinder from the valve. This situation is generally caused by the poor sealing of the valve oil seal. The solution is to replace the valve seal. If the valve guide is severely worn. It is also necessary to replace the valve guide or even the valve.

2.Caused by leakage of cylinder piston rings. For example, the oil ring scraping capacity is reduced, or the air ring leaks, resulting in too high pressure in the crankcase, and the large airflow through the crankcase ventilation brings too much oil mist into the intake pipe.

Causes oil to burn. If this condition is mild, the ring can be replaced. In serious cases, only the piston group (including the piston ring) and the boring cylinder can be replaced, which is an overhaul.

Hello, in this case I personally think that you had better check if there is a problem with the spark plug.

If you seem to be in this situation, there is no good way, it is best to repair the engine assembly, you can refer to it.

It's okay if it's not serious, it's a little bit bit.

There is burning engine oil.

The phenomenon of vehicles will have different degrees of exhaust "blue smoke" symptoms, oil consumption increased significantly, and the oil had to be replenished in a short period of time. The phenomenon of burning engine oil in the vehicle will lead to an increase in carbon deposits in the combustion chamber, a decrease in the economy and power of the vehicle, and excessive exhaust emissions.

Use oils that are of poor quality or do not meet the viscosity grades. In addition, too low or too high oil viscosity can lead to poor engine lubrication, increased wear of piston rings and cylinder walls, and reduced sealing performance, resulting in oil burning.

The poor sealing of the cylinder is the main cause of oil burning. The poor sealing of the cylinder is mainly due to the mating gap between the piston and the cylinder wall.

If the piston ring is too large, the piston ring is improperly installed or the sealing becomes poor, the oil on the cylinder wall enters the combustion chamber, causing the oil to burn.

In addition, valve seals.

Poor sealing performance, damaged crankcase vent valve, or crankcase vent blockage resulting in excessive pressure in the crankcase will cause the oil to enter the cylinder with the crankcase gas and participate in combustion.

Burning engine oil in a cold car: When the temperature of the car is not completely warmed up, the engine exhaust pipe emits a lot of blue smoke, but it is normal after the car is hot. This phenomenon is caused by the aging of the valve oil seal.

Due to the decrease in temperature, the valve oil seal of the rubber material is stiff and cannot be completely sealed, and the oil leaks from the valve into the combustion chamber and burns.

Hello, Hyundai Elantra burns engine oil definitely needs to be checked, and then go to the carbon deposit to see, and then see if it is a cylinder, I hope mine can help you, thank you!

If your car burns engine oil, there is no good way, you can choose a higher model engine oil, which will be slightly better.

If you want to burn engine oil, it is recommended that you go to the repair shop to do a comprehensive inspection, generally find the part of the engine that burns oil, and then repair it.

What should I do with Hyundai Elantra burning engine oil? If you are willing to spend money, take the cylinder block apart and replace it with a new one. If you are saving, keep a bucket of oil on hand.