Why is the steering machine easy to break, and what are the symptoms of the steering machine breakin

Causes of Direction Machine Damage:

1. In the daily use of the car, it is necessary to pay attention to the maintenance and maintenance of the steering machine. When driving on potholes, slow down to reduce the load on the steering machine.

2. The steering machine of the car should be inspected regularlyIn particular, check the protective sleeves on both sides for damage。Breakage of the protective cover can lead to premature wear and damage to the car's steering machine. This is because if the boot is damaged, water, dust and sand will flow to the damaged area and finally flow into the steering machine, causing wear and tear on the gears and racks inside, and other problems such as corrosion and wear on the inside of the steering machine.

When turning, do not kill the directionEspecially when turning in situ, there should be a certain margin to ensure that the hydraulic steering system is in normal working condition.

Characteristic manifestations of bad steering machines.

Another characteristic of a bad steering machine is the rattling sound during driving, especially when the steering wheel is turned.

There is a noticeable abnormal noise from time to time, and this symptom indicates that it is very likely that your steering machine is broken. There are many problems that cause abnormal noise of the steering machine, which are generally related to the lack of steering power oil and universal joints.

Plane bearings and other faults are related, abnormal noise is a more obvious feature, so once found, it should be immediately sent to the 4S shop for maintenance.

Why is the steering machine easy to break analysis:

The steering machine is generally not easy to break, and the working principle of the steering machine is two: inductance and hydraulic.

If the steering machine is broken, there will be such a failure: there will be abnormal noise when the steering wheel is played in place; There is an abnormal sound regardless of whether it is in place or when the speed does not exceed 20km/h.

Typical power assist pump failure leads to difficulty in turning the direction, and the direction of rotation will be abnormally heavy during driving.

1. Repair the power pump of the steering machine;

2. Or replace the power booster pump of the steering machine with a new one;

3. Claim compensation from the 4S store.

Difficulty in steering wheel returnGenerally, the steering wheel of the vehicle has the function of steering automatic return, and the car equipped with the hydraulic power steering machine has weakened the function of automatic return due to the effect of hydraulic damping.

Precautions: Always check the protective sleeves on both sides of the steering machine and the protective sleeves connected to the universal cross shaft on the upper part of the steering machine. Breakage of the sheath is the most important factor that causes early wear and damage to the steering machine. After the sheath is damaged, water, dust and sand will enter the inside of the steering machine through the damaged place, destroying the grease oil film of the rack and pinion, resulting in rust and abnormal wear inside the steering machine.

The possible symptoms of a broken car steering machine are:

1. The chassis of the car is sensitive to collapse and the bridge is round and leaking.

2. The car turns to the hairpin.

3. The car steering is heavy.

4. The steering wheel of the car is shaking.

5. There is a strange noise.

Summary. Hello, I am your exclusive technician, attentive and attentive for your car, solve the problem of the vehicle, find solutions and methods for you, first of all, the steering machine is easy to break, because the first often kills the direction is easy to cause internal damage to the steering machine, second, the vehicle in the case of water, there are electronic components on the steering machine is easy to cause electronic components to enter the water, there may be damage to the steering machine, and the power failure encounters the second situation, you can go to the insurance company to pay for car damage, However, if there is some damage caused by the frequent killing of the direction, then this cannot be compensated.

As soon as the car changed the steering machine, the booster pump broke down again.

Hello, I am your exclusive technician, attentive and attentive for your car, solve the problem of the vehicle, find solutions and methods for you, first of all, the direction machine is easy to break, because the first often kills the direction is easy to cause internal damage to the direction machine, second, the vehicle in the case of water, there are electronic components on the direction machine is easy to cause electronic components to enter the water, there may be damage to the direction machine, and the power failure encounters the second situation, you can go to the insurance company to pay for car damage, However, if there is some damage caused by the frequent killing of the direction, then this cannot be compensated.

Just changed the steering machine and booster pump, and then it was damaged, this you can find a purchase and shout Qi Sleepy to buy a unit for quality claims, but you must be buying the quality of Zheng Nian.

If it's not a quality problem that causes the new one to break, what else is the reason.

The steering machine you just changed is now damaged again, it must be the internal problem of the steering machine and has nothing to do with your car.

The steering machine is so easy to break because it has been used for a long time:

1. The damage of the ball head of the front wheel of the car will lead to the failure of the direction and the instability of the car. The loosening of the ball joint of the direction tie rod will cause the direction to deviate, eat the tires, the steering wheel will shake, and in serious cases, the ball head may fall off and cause the wheel to fall off instantly. It is recommended to replace it in time to avoid potential safety hazards;

2, the working principle of the steering tie rod hail ball head with the pull rod of the ball head shell, the ball head of the steering spindle is placed in the ball head shell, the ball head is hinged with the shaft hole edge of the ball head shell through the ball head seat of its front end, the needle roller between the ball head seat and the steering spindle is embedded in the ball head seat inner hole face groove, and the utility model has the characteristics and seepage point of reducing ball head wear, improving the tensile resistance of the main shaft;

3. There are two kinds of steering tie rods, steering straight tie rods and source shed row steering cross tie rods. The steering tie rod is responsible for transmitting the movement of the steering rocker arm to the knuckle arm. The steering tie rod is the bottom edge of the steering trapezoidal mechanism, which is the key component to ensure the correct motion relationship between the left and right steering wheels.

The steering lever is an important part in the steering mechanism of the automobile, which directly affects the stability of the car's handling, the safety of operation and the service life of the tire;

4. If there is a problem with the steering ball head, it will directly affect the safety of the car, and the stability of the car and the wear of the tires will also be affected accordingly, so in the process of use, the steering ball head of the car should be checked and dealt with in time.

Reasons for the damage of the steering machine: 1. In the daily use of the car, we should pay attention to the maintenance and maintenance of the steering machine. Clause.

1. When we drive on potholes and uneven roads, we should slow down to reduce the load on the steering machine; 2.

2. The steering machine of the car should be inspected regularly, especially whether the anti-call collision sheath on both sides is damaged. Breakage of the protective cover can lead to premature wear and damage to the car's steering machine. This is because the protective sleeve is damaged, water, dust, and sand will flow to the damaged place, and finally flow into the steering machine, resulting in wear and tear of the gears and racks inside, and corrosion and wear inside the steering machine. 3.

3. We should not kill the direction when turning, especially when turning in situ, we should leave a certain margin to ensure that the hydraulic steering system is in normal working condition.

Steering machines usually break down in the following situations:

1. The external symptoms of the ball head of the direction machine are as follows: when turning, you will hear the clicking sound of the limbs; You will feel that the direction gap is large, and the direction is unstable when driving; The light one will cause the direction to be unstable, and the heavy one will cause the wheels to fall off in an instant, especially at high speeds;

2. The steering lever is an important part in the steering mechanism of the automobile, which directly affects the stability of the car's operation, the safety of operation and the service life of the tire. There are two types of steering tie rods, namely steering tie rods and steering cross tie rods. The steering tie rod is responsible for transmitting the movement of the steering rocker arm to the knuckle arm. The steering tie rod is the bottom edge of the steering trapezoidal mechanism, which is the key component to ensure the correct motion relationship between the left and right steering wheels.

3. The ball head of the tie rod calendar shed is a tie rod with a ball head shell, the ball head of the steering spindle is placed in the ball head shell, the ball head is hinged with the edge of the shaft hole of the ball head shell through the ball head seat at its front end, and the needle roller between the ball head seat and the steering spindle is embedded in the inner hole surface groove of the ball head seat, which has the characteristics of reducing ball head wear and improving the tensile strength of the spindle;

4. The outer ball head refers to the hand tie rod ball head, and the inner ball head refers to the direction machine closed imitation tie rod ball head. The outer ball head and the inner ball head are not connected together, they have to work together. The ball head of the direction machine is connected to the horn, and the ball head of the hand pull rod is connected to the parallel rod;

5. The loosening of the ball joint of the direction tie rod will cause the direction to deviate, eat the tires, the steering wheel will shake, and the ball head may fall off in serious cases, resulting in the wheel being thrown off instantly. It is recommended to replace it in time to avoid potential safety hazards.

Millions of car purchase subsidies.