-
Attention here!!
One of the most common problems I've encountered with you, especially with newly installed computers!!
This is typically caused by incompatibility.
This is a typical incompatibility caused by BOIS.
If it doesn't work, you're looking for me, for the sake of 500 points! It's okay to come and help you get it! Desperate!
-
Blue screen error**0x00000010d is usually caused by a hardware failure. Here are some possible solutions:
Check the hardware device: Turn off the computer and check whether the hardware device, such as memory modules, hard disks, and display cards, is loose or damaged.
Perform a system restore: If you recently installed new software or updated your system, try using System Restore to restore your system to its previous normal state.
Run a virus scan: Run an antivirus software to scan your computer for viruses to rule out problems caused by virus infections.
-
1. The blue screen 0x000000ed** failed to load the boot, first try to restart first.
2. If it can't be solved, restart the computer and press and hold F8, select Enter Safe Mode, and then enter the Safe Mode desktop.
3. After entering the safe mode, select the start menu in the lower left corner, select "All Programs" - "Accessories" - "Command Prompt" and right-click to open it as an administrator. Or directly shortcut win+r to open the run-up brother comic menu, and choose to use administrator privileges to open.
4. Enter "chkdsk f r" in the command prompt interface and press the enter key, the interface as shown in the figure appears, and then enter y and press the enter key to restart the computer to fix the problem.
5. Wait for the repair to be completed, restart the electro-dust brain, if the above method does not solve the problem, then you can check whether the hard disk cable is in good contact. In addition, you can also try to reinstall the system with a USB flash drive
-
1. First of all, we must determine the cause of the blue screen, and determine the cause of the failure through the query, the blue screen 0x000000ed is caused by the failure of the hard disk.
2. Solution. Steps to enter the security cover envy mode to repair the hard drive:
Restart the computer and press (i.e., press once, stop once, but fast) F8 to enter the safe mode with command prompt;
When the computer enters safe mode with command prompt, click Start - Run Enter cmd, press Enter, open the Administrator Command Prompt window, enter the chkdsk r command, press Enter;
If you can't open the administrator command prompt window as described above, click My Computer - C: Windows - System 32 - Right-click: and left-click in the context menu
Run (a) as administrator, enter the chkdsk r command in the open administrator command prompt window, press enter;
After we click enter, a prompt appears: the file system type is NTFS, and the current drive cannot be locked. Since the volume is being used by another process, chkdsk cannot be run.
3. Restart the computer and repair the hard drive. If it is repaired, it can be turned on normally. Congratulations! The repair was successful. If the problem persists or an error appears in the repair, you may want to consider a new drive.
-
Computer Blue Screen 0x0000000ed Resolution Steps Hello dear, check the hard drive connection! Generally, it is caused by an error in the disk disk, check whether the hard disk connection is not in good contact or whether the hard disk cable does not meet the specifications. If there is no problem with the hard drive cable, we can enter safe mode to fix it.
Repair hard drive in safe mode! 1. Restart the computer, keep pressing F8 to enter when booting up, select safe mode, and press enter to enter. 2. After entering the system security mode, press and hold win+r at the same time to open the running window, enter cmd and press enter.
3. After opening the command prompt window, enter chkdsk f r and press enter. Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.
Finally, I wish you good health and a good mood!
It is caused by the sudden power failure and shutdown of your computer or the card before the shutdown, resulting in disk damage. >>>More
Computer error**0xc0430001
Hello, the computer appears as the above error ** solution: 1, the computer boot, to win10 boot logo interface, long press the power button, force shutdown, and then turn on, and then win10 boot logo interface, and then long press the power button, force shutdown, repeat this operation three times, it will automatically appear diagnosing your computer, will appear automatic repair interface 2, automatic repair, your computer is not started correctly, click advanced option 3, select an option, Click Troubleshooter (reset your PC or see advanced options)4, under Troubleshooting, click Advanced options5, under Advanced options, click Startup Setup Pure (change Windows startup behavior); 6. Under Startup Settings, click Restart; 7, the serial number 4 - 6 are all safe mode, we can choose it according to our needs, there is no need for the network, press the number 4 key or F4 key, enable the safe mode on it, after entering the win10 security mode, think about what software was installed before encountering this problem, whether the driver was updated, for example: graphics card driver, uninstall it, try to turn it on. >>>More
Boot press f8 to do not move to the advanced option appears in the let go, select "the latest correct configuration" enter to repair, it is not possible to press f8 to enter the safe mode to restore the system or reinstall the system. >>>More
It is possible for the computer to overheat and have a blue screen, and it is even more likely to have a blue screen like you have periodically. When in use, open the side cover and play with the fan.
The memory is hard, and the system is all problematic.