How do you enlarge words to the maximum in a word document?

You can adjust the size of the font directly.

Tool: Word 2010 version.

1. As shown below, first select the word you want to enlarge, and then click the inverted triangle next to the font size at the top of the page;

2. In the pop-up box, pull to the bottom, the maximum font provided by the document is 72, click;

3. You will see that the selected font has become larger accordingly;

4. If you still want to set a larger font, then select all the fonts you want to make larger, and directly enter a larger number than 72 in the font size box, here take 100 as an example, and click the Enter key after entering;

5. You will see that the selected font has become larger.

Method 1: 1. Select the text that needs to be set;

2. Enter the required value in the font size input box on the Start tab, such as 400, and press Enter.

Method 2: 1. Select the text that needs to be set;

2. Hold down the CTRL key, increase the font size by one pound with each key, and press the key continuously until the desired size is reached.

Method 3: 1. Select the text that needs to be set;

2. Hold down the Ctrl + Shift keys, increase the font size each time you press the "" key, and press the > key continuously until you need the size.

Note: The minimum font size is 1 point, and the maximum font size is 1630 points.

You can select the word and right-click to see that there is a set font can be changed to the maximum in **!

Take word 2010 version as an example, as shown in the figure below, you need to put this part of the text to the maximum;

Select this part of the text first, place the mouse in front of the text, and then hold down the left mouse button and pull it right to select all of them;

In the upper right corner of the start page, find the font setting column, click on the inverted triangle symbol of the font size on the right, and the font size will appear.

Because you want to set it to the largest font, pull down the scroll bar, and you will see that the maximum font setting is 72 fonts, click 72;

If you just want to enlarge one or two words, then only select these two words when choosing, and then set it according to the steps.

Method. 1. Select the word that needs to be enlarged, and then enter the number above 72 in the "font size" in the "format" toolbar, for example, here I enter "150", and then press the "enter key", then the font immediately becomes a large font size of 150.

Method. Second, the same, select the word in the word document that needs to be enlarged, click the right mouse button, select "font" in the pop-up options menu, and then enter a larger font size in the "font size", such as: here I enter 200, and then OK.

Method. 3. Use word shortcuts to enlarge fonts. After selecting Chinese characters, we use the key combination "ctrl + hold down, and we can automatically enlarge the font slowly; Press the key combination "Ctrl + to slowly reduce the font size".

If you feel that pressing "Ctrl + Enlarge Font" is slow, of course you can choose to use the shortcut "Ctrl + Shift + Quickly Enlarge Font", and the combination of "Ctrl + Shift + Quickly Reduce Font".

You can adjust the size of the font directly.

Tool: Word 2010 version.

1. As shown below, first select the word you want to enlarge, and then click the inverted triangle next to the font size at the top of the page;

2. In the pop-up box, pull to the bottom, the maximum font provided by the document is 72, click; With talking skin.

3. You will see that the selected font has become larger accordingly;

4. If you also want to set a larger font, then select all the fonts you want to make larger, and directly enter a number larger than 72 in the font size box, here you take 100 as an example, click the enter key after entering;

5. You will see that the selected font has become larger.

Here's how:

1. Open the word document on the computer.

2. After opening Word, select the text you want to enlarge.

3. After selecting the text to be enlarged, press and hold Ctrl+Shift+> at the same time to enlarge the text infinitely, and you can put it as big as you want.

4. Select Chinese characters and press ctrl+shift+" to shrink Li Xiaozi.

Other ways to enlarge text:

Select "Font Presentation" in Word, and click "Display Scale" in the "View" interface. Then enter the value in the "Percentage" field on the page.

How to enlarge the word interface:

1. Switch to the [View] tab, in the [Display Scale] group, click the [Display Scale] button, and the [Display Scale] dialog box will pop up, you can directly select the set ratio, or enter the corresponding ratio in the percentage, and click [OK].

2. In the lower right corner of the page, the page display scale is the page display, which can be directly dragged to set the scale. The disadvantage is that it cannot be adjusted accurately at the first time.

3. Press and hold the [Ctrl] function key and slide the scroll wheel at the same time to directly adjust the display ratio.

<> how to shrink the handwriting page window of the computer Sogou input methodAnswer1、First of all, we enter the computer and open the program to enter the text。

2. Then when we enter the text and use the Sogou input method, we find that the display is too small and not easy to use.

3. Then we click on the [Attribute Settings] function in the Sogou input method toolbar.

4. Then we enter the window and click on the [Appearance] option on the left side.

5. After that, we check [Input Method Window Adaptation] at the top of the inside, and then open the settings interface.

6、After we open the input method,You can choose the keyboard adjustment,Press and hold the adjustment box icon to adjust the size of the input method window you want。

In most cases, we choose to use word articles, and we usually format the articles after the articles are completed. What if we need to enlarge the word font in the process of typesetting?

Method 1: Click to increase the font size and press the orange button

After opening the Word document, we click the [Increase Font Size] icon under the [Start] menu, and we can continue to enlarge the font by constantly clicking on the icon.

Method 2: Shortcut key Ctrl and ].

How to operate: After opening the word document, select the text content that needs to be enlarged, press and hold the Ctrl and ] keys on the keyboard, press it to enlarge the font size, and hold it all the time to achieve infinite magnification of the font! On the other hand, if we press and hold the CTRL and [ keys on the keyboard, the font size will be reduced by pressing once!

Method 3: Right-click to set the font size

In addition to adjusting the font size in the [Start] tab, we can also select the content in Word, and then right-click the mouse, and you can also set the font size in the pop-up page!

1. Select the text you want to enlarge, and then right-click the mouse, and a menu will appear.

2. Select the font size in the menu, and the numerical size of the font size determines the size of the selected text.

Here's how1. First of all, open Word and select the text that needs to be enlarged in Word.

2. Right-click the mouse to select: Font.

3. Select "Font size" in "Font".

4. Select the up button, the higher the font is.

5. For example, if you select a font, click OK.

6. When it is done, the font will be enlarged.

Tips. Quickly set up a spread to duplicate the header row.

The specific operation steps, as shown in the figure below, click any cell of a title line in word**Dizhouhu, in the word menu area, click "Layout", click "Repeat Title Line" in the upper right corner of the ribbon, and then the first line of all pages behind ** shows the content of the title line.

Quickly customize the watermark.

The specific operation steps, as shown in the figure below, in the word menu area, click the "Design" option, on the right side of the ribbon, click "Watermark", the drop-down options are preset with a lot of Tanji watermark formats, you can customize the watermark and set personalized display properties according to your needs.