The Skyworth drum washing machine doesn t turn when it s about to be washed for 10 minutes in 15 min

This phenomenon is that the motor cannot start normally or cannot run, resulting in the drum cannot rotate. The causes of the failure and maintenance methods are as follows: 1. The grid voltage is too low, and the grid voltage is too low, which will make the output torque of the motor fail to reach the specified value, so that the drum cannot be driven.

When checking, you should check whether the power supply voltage is normal, if the voltage is too low, you should pause or use a booster to adjust the voltage to a normal value before turning on.

2. Too much washing is placed, and the weight is exceeded, which makes the motor overloaded. At this point, you only need to take out some of the laundry and it will work properly.

3. When the transmission belt slips or falls off, the torque of the motor cannot be transmitted to the running parts, which will cause the drum to not rotate. At this time, you can use the screw screw to unscrew the fixing screw on the back cover plate of the washing machine, remove the back cover, check whether the V-belt is worn or fall off, if so, you need to replace the transmission belt or adjust the position of the motor, so that the tightness of the transmission belt is suitable for use.

4 Capacitor damageWhen the washing machine uses a capacitor-operated motor, the capacitor will not be able to start and run normally due to short circuit, open circuit, grounding and aging. In this case, replace the capacitor with a new capacitor of the same size, and the motor will start running normally.

5 Motor starting winding open circuit When the motor starting winding is broken, it will cause the motor to have a "buzzing" sound, but it cannot start normally, and it needs to be repaired or replaced with a new motor.

6 Check whether the drum is stuck by foreign objects, and if so, remove it. Tips: If the drum automatic washing machine runs slowly and cannot reach the rated speed, it can also be repaired according to the above methods.

Please if it is handled well, I also bought this new one.

Summary. Hello <>

This condition can be caused by a variety of reasons. First of all, it may be due to a failure of a component near the drum, such as a drum bearing, a transmission belt, etc. These faults may result in the drum not functioning properly, or a humming sound when operating.

When the drum is not functioning properly, the washing results may not be good or even complete the washing process. Secondly, it could be because of a faulty motor or a power supply issue. The motor is one of the most critical components in a drum washing machine, and if the motor fails, the drum may not rotate properly.

At the same time, power supply issues can also cause the motor to not work properly. Finally, it may be because the control panel of the drum washing machine is malfunctioning. The control panel is the core component that controls the various functions of the drum washing machine, and if it fails, it may cause the drum to not work properly, or there may be abnormal phenomena.

If this happens to you, it is recommended that you first check for any obvious mechanical damage or loose parts. If you are not a professional, it is best not to repair it yourself to avoid more serious problems. It is recommended that you have a professional repairer inspect and repair your front-loading washing machine.

The drum washer washes for two hours, and by the last 30 minutes there is no buzzing.

Hello <>

This condition can be caused by a variety of reasons. First of all, it may be due to a failure of a component near the drum, such as a drum bearing, a transmission belt, etc. These faults may result in the drum not functioning properly, or a humming sound when operating.

When the drum does not function properly, the washing results may not be good, or even the vertical washing process may not be perfected. Secondly, it could be because of a faulty motor or a power supply issue. The motor is one of the most critical components in a drum washing machine, and if the motor fails, the drum may not rotate properly.

At the same time, power supply issues can also cause the motor to not work properly. Finally, it may be because the control panel of the drum washing machine is malfunctioning. The control panel is the core component that controls the various functions of the drum washing machine, and if there is a failure, it may cause the roller to fail to work properly, or there may be abnormal phenomena.

If this happens to you, it is recommended that you first check for any obvious mechanical damage or loose parts. If you are not a professional, it is best not to repair it yourself to avoid more serious problems. It is recommended that you have a professional repairer inspect and repair your front-loading washing machine.

Hello, you can try to turn off the machine and start it again to try Li Shi to try Songxu, to see if it can be used normally, if you can't, that is, the washing machine is faulty and needs to be disassembled and checked and repaired by professional personnel.

1. It may be because the switch of the lid of the washing machine is broken and cannot be closed tightly. 2. It is also possible that the washing machine itself is faulty. 3. It is also possible that there is a problem with the power cord connecting to the washing machine, resulting in the interruption of the power connection.

Suggested workaround:

1. When the lid of the washing machine cannot be closed tightly due to the damage of the switch, the washing machine will automatically stop running normally. Therefore, the user needs to find a maintenance person to repair the switch so that it can re-close the lid of the washing machine.

2. If the fault of the washing machine itself causes it not to turn, the user also needs to ask a professional washing machine maintenance personnel to solve it. They will first find out the specific parts of the washing machine that are failing. If the failure of the component is minor, they can continue to use it after they have repaired it.

However, if the part is so badly damaged, it will not be possible to restore it to its original condition, even if it is reluctantly repaired. In this case, the user should consider asking the maintenance personnel to replace it with a new part.

3. If there is a problem with the power cord, the user can first judge whether the power cord is seriously aged. If the power cord is badly aged, you can ask a professional electrician to help you reconnect a power cord. However, if the power cord is only slightly damaged, and the power supply cannot flow normally, the user can wrap the damaged area with insulating tape.