PS3 not going online with DNS error

DNS is automatic, don't set it yourself.

PS4 DNS error is caused by the fact that the computer is not using the accelerator, and the specific fixes are as follows:

1. First of all, open the Jiahuisui early speeder on the computer:

2. Then in Network and Properties, find the icon of the accelerator, and then right-click and select Properties:

3. After a new dialog box appears, select Local Connection:

4. After a new window appears, you can see the firewall of the computer at this time

5. Click to turn it on, so that the DNS of PS4 will not have an error:

Changing DNS on PS3 will not affect the computer.

Changing the wireless DNS on your home wireless router will affect all your wireless devices.

After the wireless router is changed to wireless DNS, there is actually no need to change it on PS3.

If your computer uses wired Internet access, it still doesn't matter.

Unless you change the wired DNS of the wireless router

These are all well understood.

The network signal to the transmission is layer by layer, first to the outside switch, then to your home wireless router, and then to your home Internet equipment.

One of the layers has changed the DNS, and the signals below are equivalent to the changes, and the lower-level devices do not need to change the DNS, because the signals have been changed.

The problem is that changing the DNS signal can improve the PSN communication quality of the PS3, but it may also reduce the communication quality of other devices.

For the same broadband, the band speed is fixed (floating). The more devices that go online, the total bandwidth will be divided, and the corresponding network speed of each device will slow down.

First of all, it should be explained that the split disk has no direct relationship with the Internet speed, at most, when the C disk space or IE cache is insufficient, it will affect the system running speed, which will indirectly lead to the slow Internet speed.

1. If the XP system is installed, the 10G C disk fully meets the requirements of use.

2. If you install Win7, the C disk space is definitely not enough, and 20G is recommended. (Because I only have a 100G hard disk, I keep the C drive partition 15G).

3. Pay attention to the installation of the program, try to install it in other partitions other than the C drive, such as the D drive.

Write at the end, if you are still satisfied, it is the best. Thank you!

No, although the broadband is connected from the ** line, there is a separator, and there is no effect.

Hello lz,It will not affect the speed of the Internet,Now the lowest network card Hongsun is 100M,Home broadband is generally 4M or 2M,So enough for application。 The speed depends on the quality of your broadband and your broadband** provider, so if you feel slow, we recommend calling your local network operator to have it repaired. (If there is no problem with the quality of your network card hardware, it will not be affected, but if the hardware fails, it will be affected.)

It will affect the boot speed, but not the network speed.

If it doesn't work, it won't affect your internet speed.

Generally speaking, the Guanyou dismantling system is not large.

As long as the power is not too small, the belt will not move.

No, my cat never turns off and has been on for months. Nothing has changed.

Of course it will, do you want traffic?

DNS Error 80710102 Yes PS3 Network Problem If your route can automatically get the IP, then the IP address should be set to automatically get and then the address of the god card should be set to.

Local connections are opened to allow other connections to connect to the Internet through this connection, and all PS3 aspects are automatic.

In addition, sometimes even if you set it up correctly, there may be problems due to poor network connection, so try it a few times.

It's really not possible to call a ** merchant who buys you ps3, and they will reply to your above hope that it will help you, lz try it.

This kind of problem is really a headache.,LZ said that the setting is right and it's not a whole set of things.,And many people have said a lot in the setting.。。

If the LZ is plugged in directly, then it is right to directly apply the Internet settings of the PC. Let me give you my personal experience: when I used a wireless router to connect to PS3 wirelessly, the settings were correct, but I kept getting DNS errors; But change to a network cable to connect to a router, the same settings, there is no problem...

It is very likely that the connection error is caused by insufficient bandwidth (or poor network)!! ”

This is very easy to ignore.

As for whether PSN has restrictions on the mainland's IP, I don't know, but many people can get on PSN, and it is certain that they can play games online with domestic and foreign players, including me (useless**), otherwise you can only contact your network ** provider or find another way.

I accidentally coded a lot of words.

Ok, the landlord can choose to get it all automatically and test it again.

If you still can't connect, then IP automatically, DNS settings are as follows:

DNS is provided by local network service providers, you can **consult your network service provider (Unicom Telecom or something) they will tell you, such as I am Taiyuan Netcom, then DNS is, standby.

But our Netcom here will prohibit local DNS from connecting to some lines, so my backup DNS is universal, so I can connect.

Also: Sometimes the PS3 network will be busy and you can't log in.

If you have a problem with your Wi-Fi configuration, you can set the Wi-Fi limit, and PS3 is only suitable for specific Wi-Fi protocols to surf the Internet.

I stumbled upon this problem, I don't really understand, but you can ask the unit that sold you the PS3 how to set up the Internet. If you don't understand, you can also take the machine to them and let them debug it, I hope it can help you.

The DNS at home is a direct copy of that.

You can set the NIC to automatically get the IP address.

Set the laptop wifi to a wifi hotspot, so that the mobile phone can connect to the laptop wifi hotspot to surf the internet, but now it can't go to the internet normally after connecting, this is because there are still the following problems that have not been dealt with:

1. Make sure that the laptop can access the Internet normally, that is, the "local connection" is connected to the network normally;

2. Determine whether the laptop has a wireless network card and whether the wireless network card is turned on;

3. Check whether the network share of "Local Connection" is set correctly.

2. Reinstall the wireless network card driver and turn on the wireless network card switch;

3、a.Restart the computer, turn on the wifi, and select "Wi-Fi" in "Local Connection" and "Home Network Connection".

d.Disconnect the wireless hotspot and reconnect