How to deal with the campus broadband that cannot be connected to the Internet?

1.Update the NIC driver;

2.Or open the network center, find the IP (IPv4) address, and select Automatically obtain;

3.Check whether the DHCP service is enabled and enabled for the system service, and if so, disabled.

If there is a conflict, try changing the last number. If you can't get on it anymore, it depends on whether your Internet access method is the legendary MAC address binding method.,If so, then you're in for a cup.。 You'll have to buy a router and clone the shared Internet with a MAC address.

1) Broadband Obstacle Error**126691: The reason for the error may be the wrong password of the user, the problem of the user's client or the problem of the computer terminal; Handling suggestions: a. Please send it to the 10001999 to get the password again and enter the correct password; b. The user re-updates the latest client program; c. User substitution terminal processing; d. Please ask the branch to conduct on-site investigation; (2) Broadband Obstacle Error **126678:

The cause of the error is the user's device and computer network card: Check the device and cable connection, restart the device if necessary, and try again. Users in Guizhou pay attention to China Telecom's Guizhou customer service*** can pay on WeChat, check the phone bill with one click, and the traffic, points, bills, and detailed orders can be operated by themselves, which is convenient and fast.

Causes of failure: data is exhausted, the network speed is too slow, and the phone is set to wifi hibernation.

Here's how to fix it:

1. Turn on the mobile phone, start the wifi management, you need to wait for a while to scan the surrounding wireless network, select the name of the campus wifi, and click the link.

2. Wait for the connection to be successful, I have entered the wifi authentication page. Because the campus network is mainly for students and teachers, of course, it is mainly for the school. After connecting, the login authentication page will pop up automatically, please click it.

3. Enter me and the password, and select Remember password to facilitate the next login. Please note and password formatting. Generally, it is your own student number, and the password is generally the last six digits of your ID number.

Fourth, if you're lucky, you'll usually be able to connect. However, sometimes there are many people connected to it, and you can't log in at all. will be stuck on an interface, as shown in the image below. A ** will appear, but the message cannot be loaded.

Fifth, there is another way to log in. It is to remember this**, as shown in the figure below, you only need to remember the number part, and when you enter **, you also mainly enter the number, which is like an IP address.

<>7. At this time, a new login interface will pop up, and if you want to enter the password again, there will be a prompt password on the left side of the login interface. Click Login to go to the prompt login success screen.

1.Select Network Select Network for Connection, select Network with "Student" for students, and "Teacher" for teachers.

2.Enter the student ID password and select the operator Enter the student ID password (the teacher enters the staff number) on the pop-up login page and select the operator.

3.Connect to the network Click "Connect login", and the interface will show "You have successfully connected to the campus network!" That's it.

Here's how:Tools: Computer,win7 systemVersion.

1. First of all, you need to open your computer to find the network, and then go to the network and sharing center.

2. After entering, the following page will appear, then select Set up a new connection or network, and click to enter.

3. After clicking Enter, select Connect to Internet on the page that appears.

4. Create a new connection without a link after entering.

5. Once you have created a new link, select Broadband Connections to establish a new broadband connection.

6. Enter your username.

and the corresponding password, click "Connect" to use the campus network.

Summary. The campus broadband connection is not good, hello, the campus network shows that the connection but the reasons for not connecting to the network are: 1. Network failure.

2. Equipment failure. Solution: 1. Turn on the mobile phone to start the wifi, select the name of the campus wifi, and click to connect.

2. After connecting, the login authentication page will automatically pop up, please click. 3. This is the page that is out of order. 4. Open the browser that comes with the phone, and enter the numeric IP address in the ** column.

As soon as you enter the number part, you will be prompted to log in to the window. 5. At this time, a new login interface will pop up, and if you want to enter the password again, there will be a hint of password on the left side of the login interface. Click Login to go to the prompt login success screen.

I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>

There is no broadband connection on campus.

The campus broadband connection is not good, hello, the campus network shows that the connection but the reasons for not connecting to the network are: 1. Network failure. 2. Equipment failure.

Solution: 1. Turn on the mobile phone to start the wifi, select the name of the campus wifi, and click to connect. 2. After connecting, the login authentication page will automatically pop up, please click.

3. This is the page that is out of order. 4. Open the browser that comes with the phone, and enter the numeric IP address in the ** column. As soon as you enter the number part, you will be prompted to log in to the window.

5. At this time, a new login interface will pop up, and if you want to enter the password again, there will be a hint of password on the left side of the login interface. Click Login to go to the prompt login success screen. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

I've just applied for campus broadband, what should I do if I come back?

It's broadband, it's not a campus network.

Hello dear, Broadband Failure Error**126691: The reason for the error may be the wrong password of the user, the problem of the user's client or the problem of the computer terminal; Handling suggestions: a. Please send it to the 10001999 to get the password again and enter the correct password; b. The user re-updates the latest client program; c. User substitution terminal processing; d. Please ask the branch to conduct on-site investigation; (2) Broadband Obstacle Error **126678:

The cause of the error is the user's device and computer network card, and it is recommended to check the device and cable connection, restart the device if necessary, and then restart it.

OK.

The campus has handled campus broadband, and other broadband can also be handled outside the campus. This is unaffected.

Campus broadband is the campus network.

It is a broadband multi-professional network that provides teaching, scientific research and comprehensive information services for teachers and students of the school. First of all, the campus network should provide an advanced information-based teaching environment for school teaching and scientific research. This requires:

The campus network is a broadband, interactive and professional local area network.

Multi-teaching software development platform, multi-demonstration classroom, teacher preparation system, electronic reading room, teaching, examination database, etc., can all be run on the network. If a school includes multiple professional disciplines (or departments), it is also possible to form multiple local area networks and connect them wired or wirelessly. Secondly, the campus network should have the functions of academic affairs, administration and general affairs management.

Related Extensions

Broadband: There is no strict definition of Wisdom Cave. From a general point of view, it is a dynamic and developing concept that can meet the needs of various ** transmission on the network that people can feel, so it is also a dynamic and developing concept.

On January 7, 2015, the Federal Communications Commission (FCC) made its annual broadband progress report, in which the current chairman Tom Wheeler redefined "broadband", adjusting the original downlink speed of 4Mbps to 25Mbps, and the original uplink speed of 1Mbps to 3Mbps.

The new standard for broadband networks in the United States: 25Mbps downlink and 3Mbps uplink.

By the end of 2020, China's fixed broadband household penetration rate had reached 96%, and the mobile broadband user penetration rate had reached 108%.

The above content refers to the Encyclopedia - Broadband.