What s going on with the Apple 6s upgrade system error

If you have a network problem, or a phone problem, you can try it again.

The steps to upgrade the system are as follows:

First, the steps to upgrade the iPad system on the device are as follows;

1.Open the "Settings" icon on your iPad when you are connected to WiFi.

2.In the settings list, click on the "General" option, and then click on "Software Update".

Second, update the system with iTunes on your computer, the steps are as follows.

1.Connect your iPad to your computer, open the iTunes software, and click the iPad button in the top right.

2.When iTunes detects a connected device, it will automatically connect to the Internet to detect whether there is an update system available, and then automatically pop up the update update.

3.If it doesn't pop up, you can also click the "Check for Updates" button on the summary screen of your iPad.

How to deal with iPhone system upgrade failure: You can put your iOS device into recovery mode and restore the device with iTunes:

2. If iTunes is turned on, please turn it off, connect your device to the computer, and then open iTunes;

3. With the device connected, force restart the device with the following steps: 1. On iPhone 6s and earlier, iPad or iPod touch: Press and hold the Sleep Wake button and the Home button at the same time, when you see the Apple logo, don't let go of the buttons, keep holding both buttons until you see the recovery mode screen.

2. On iPhone 7 or iPhone 7plus: Press and hold the Sleep Wake button and the volume down button at the same time, when you see the Apple logo, don't release the buttons, keep holding both buttons until you see the recovery mode screen.

4. When you see the option to "Restore" or "Update", choose "Update". iTunes will try to reinstall iOS without erasing your data, wait for iTunes to have your device's software, if it takes more than 15 minutes and your device is out of recovery mode, wait for it to end and then repeat the third step.

Hello dear, the reasons are as follows: 1. The network is not turned on, which makes it impossible to check the update [in Settings - Wireless Network - Enable Network]. 2. System network problems [restore network settings] or update directly on the computer. To restart the device, according to the prompt information, the current update cannot be verified because the iPhone is not connected to the network, but in fact, the phone is connected to the network, but there is a problem with the network connection with Apple's update verification server, which causes such a problem.

In the case of passing, you can try several more times, or you can shut down and restart to try again.

Update your device over-the-air.

If a message appears that an update is available, tap Install Now. You can also follow these steps:

Plug your device into a power source and connect to the internet via Wi-Fi.

To update immediately, tap Install. Or you can tap Later and choose Install Tonight or Remind Me Later. If you tapped Install Tonight, just plug your iOS device into a power source just before bedtime.

Your device will automatically update overnight.

If you're asked to enter your password, do so. If you don't know your password, learn what to do.

If you see an error message when you try to update your device over-the-air, learn what to do. If you need more space to update over-the-air, you can use iTunes to update or manually delete content from your device. Whether you're using iTunes or updating over-the-air, the amount of free space on your device after the update is the same.

Some iOS software updates aren't available over-the-air. A VPN or ** connection may prevent the device from communicating with the iOS update server.

Use iTunes to update your device.

If you can't update your iOS device wirelessly, you can do it manually using iTunes on a computer you trust. If your computer is using a Personal Hotspot on an iOS device that you want to update, connect your computer to a different Wi-Fi or Ethernet network before you update.

Install the latest version of iTunes on your computer.

Connect your device to your PC.

Open iTunes and select your device.

If you're asked to enter your password, do so. If you don't know your password, learn what to do.

If you see an error message when you update your device with iTunes, get help. Or, if an update requires more space, you can manually delete the content from your device.

The direct update of the mobile phone sometimes happens like this, maybe the network is not good or the firmware version is invalid;

You can use the assistant upgrade on your computer.

You can install PP Assistant on your computer.

Connect the device with a data cable.

The possible causes are as follows.

1.If the network is not turned on, there will be an error in checking for updates [in Settings - Wireless Network - Enable Network].

2.There is an error in the system network [restore the network settings].

It is recommended to update it directly on your computer. To update the system using iTunes on your computer, follow these steps.

1.Connect your iPhone to your computer, open the iTunes software, and tap the "iPhone" button on the top right.

2.When iTunes detects a connected device, it will automatically connect to the Internet to detect whether there is an update system available, and then automatically pop up the update update. If it doesn't pop up, you can also click the "Check for Updates" button on your iPhone's summary interface.

How to reinstall the system on the iPhone.

Once you have the iTunes software on your computer, connect your iPhone to your computer with an original cable. Next, open the iTunes software and click on the .

iPhone icon, in iTunes

Click the "Back Up Now" button in the window, and after backing up the data according to the prompts, the next step is to let the iPhone enter recovery mode. In this recovery mode, it is possible to install a pure system for your phone thoroughly.

1. Press and hold the power button first, when the shutdown option appears, please slide to power off.

2. Then press the power button to turn on the computer, the Apple logo will appear on the screen, do not release the power button.

3. Then press and hold the home button on the home screen until the screen goes black.

4. When the screen is black, please release the power button and continue to press and hold the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode.

1. The reasons for the error may be as follows:

1. Check whether there is software installed that blocks system updates, and delete it in the description file.

2. Check whether the memory is full, and keep more than 5G memory margin.

3. Try again after shutting down and restarting, or go to Settings-General-Restore, and try again after restoring the network settings, and try several times in different periods.

4. The system cannot be upgraded through the traffic of the mobile data network, but can only be upgraded with wifi.

2. The solution is as follows:

The first method: normal recovery.

1. Turn off your iPhone.

2. Press and hold the power on button and the home button at the same time.

3. When you see the white Apple logo, please release the power on and off button, and continue to hold the home button.

4. Turn on iTunes and wait for it to prompt you for recovery mode, then you can hold down the shift key on your keyboard, click "Restore", and select the corresponding firmware to recover.

Method 2: Some users fail to enter DFU mode due to poor control of the time point.

1. Press and hold the power button at the top for 3 seconds;

2. Don't release the power button and press and hold the home button for 10 seconds;

3. Release the Power button and continue to press and hold the Home button for 30 seconds until iTunes automatically detects the iPhone out of recovery mode.

Open the mobile phone [Settings];

Open [General];

Open Restore;

Open Reset Network Settings;

Generally, there is a problem with the connection, if you confirm that the network signal is fine, you can try to shut down and restart.

When the update cannot be detected in [Settings-General-Software Update] on iPhone, if you are using a mobile data network, please connect to the wireless network and try again.

If you still can't check for updates after connecting to a wireless network, or if you are still connected to a wireless network, you can also try to manually change the wireless DNS address. First of all, please open the [Settings] app on the home screen of your iPhone, in the settings list, please touch the [Wi-Fi] column, and then in the list of wireless networks, tap the [Information] icon on the right side of the currently connected wireless network, as shown in the figure.

Then, in the list of wireless networks on your iPhone, click on the DNS column, delete the DNS address that was automatically obtained, and then manually enter this. Once you've changed the DNS address of your wireless, try the software update on your iPhone again to see if that fixes the problem.

If that doesn't work, you can try changing to a different wireless network or restarting your iPhone.

If you find that it still doesn't work after restarting, the next recommendation is to change the time slot and try again. By changing the window, you can avoid Apple's update server congestion or some of Apple's service issues.

In addition, if the current iPhone is jailbroken, no matter how much you try, it will not detect the update normally. So if it's a jailbroken iPhone, connect it directly to your computer and use iTunes to check for updates and upgrade.

Reset cellular settings:

Also open Settings on the iPhone 6SPlus phone interface, tap General to enter, and then press Restore to reset the network settings.

Fix NDS system issues and others.

Turn off your phone and restart it, and try to update the system again.

2.To restore your phone's network settings and then update the system, first open the settings, click General, then click Restore, then click the Reset Network Settings option, and finally click Reset Network Settings again.

3.If the above methods cannot be solved, it is recommended to take the phone to the official repair center of the Apple mobile phone for maintenance.

Hope it helps, dear.

If not, it is recommended that you go to the after-sales service for maintenance, dear.

Question Okay, thank you.