As soon as the computer is turned on, it shows that it is updating, what should I do if I can t turn

The blue screen at boot is related to your improper operation before the shutdown (please think about what you did on the computer before the shutdown, and ask me if you have any questions).

Immediately after booting, press f8 to the advanced option to appear in the let go, select "the latest correct configuration" enter to repair, and press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

It's really not possible to reinstall the system, if you can't reinstall it yourself, go to the maintenance there to find a maintenance person to help you, it should take a little to spend it, if you can't turn on the machine by any method, this is a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it down, one is to put it for a period of time in the boot to try, or you can't repair it.

The computer boot shows that the update is being installed, and it can't be turned on The solution is as follows:

1. Open Start and click to open the control panel.

2. After opening the Control Panel, click System & Security.

3. Then click Windows Update Selection in System & Security.

4. Select the Change Settings option.

5. In the drop-down menu of the settings, select Never check for updates, which is the last option, and then confirm it, and the computer will not install updates in the future.

Do not restart or power off when installing the update, otherwise it will damage the system files, seriously cause the computer to not be able to boot, the installation update is generally about 10 minutes --- half an hour, and the installation update or application update will be displayed after turning it on again.

If you can't enter the system for a long time, it is recommended to press F8 to enter the safe mode when you boot up (you also need to wait for the update), and then use the 360 system first aid to repair the system damaged files.

If your computer won't turn on after an update, here are a few things you can try:

2.Force Shutdown: Press and hold the power button to force a shutdown. Then press the power button to power on and see if it can start normally. However, this method may lead to data loss or damage to operating system files, so please use it with caution.

3.Enter Safe Mode: Press the F8 key during the boot process to enter safe mode, and then try to fix it.

4.Use a recovery disk: If you have a recovery disk, you can use it to restore your PC to a previous state.

5.Reinstall the operating system: If none of the above methods solve the problem, you can consider reinstalling the operating system.

If you're not sure how to do this, it's a good idea to seek professional help or contact your computer manufacturer's technical support.

Force power on and off three times, the system will enter the repair state, see if the automatic repair is successful If you can't Advanced options There is a reset computer in it Only reset the system disk, and the data of other disks will not be lost.

If your PC won't start up and it's always updated, there are a few reasons why:

System File Corruption: If the Windows system files are corrupted, it will cause the computer to fail to boot and be in an updated state all the time. This can be caused by things like a sudden power loss or a non-proper shutdown of the computer.

Software Driver Issues: Some software or drivers may not be compatible with Windows Update, resulting in the computer not booting.

Disk Corruption: Disk corruption can cause Windows to lose access to necessary system files, preventing the computer from booting.

Hardware failure: Hardware failures, such as memory, processor, or motherboard, can also cause your computer to fail to boot.

How to fix this:

Try to enter safe mode: When the computer starts, press and hold the F8 key to enter safe mode. From Safe Mode, you can try to do a system restore or remove recently installed program drivers to resolve the issue.

Rebuild Boot Log: If the system files are corrupted, you can try to rebuild the boot record using a Windows installation disk or repair tool.

Replace damaged hardware: If disks or other hardware are damaged, you'll need to replace them.

If none of the above methods solve the problem, the best option is to contact your computer manufacturer or technical support for help. Pin old.

It could be one of the following reasons:

System update failure: If your computer is undergoing a system update and the update fails, it may cause your computer to fail to start properly.

Hardware failure: A hardware failure of your computer can also cause your computer to not boot properly. For example, hard disk failures, memory failures, power failures, etc.

Virus infection: A virus infection on your computer may also cause your computer to fail to boot properly.

System File Corruption: If your computer's system files are corrupted, it can also cause your computer to not boot properly.

If your PC is always updated, we recommend that you try the following:

Force shutdown: Press and hold the power button to force a shutdown, and then restart the computer.

Enter safe mode: Press the F8 key to enter safe mode when the computer is turned on and balanced, and then try to fix the problem.

Restore the system: Use the system recovery function to restore to the previous state.

Reinstall the system: If none of the above methods resolve the issue, you may need to reinstall the operating system.

This is the computer is in the process of configuration update, just wait patiently.

If you want to avoid this next time, you can turn off automatic updates by following these steps: Mask Pose.

1.Click the Start Menu in the lower left corner of your computer, find the Control Panel, and click Open;

2.Select System Security and click Open;

3.Click Windows Update to open;

4.In the left rail, select Change Sensitive Setting to turn on;

5.Select the drop-down bar Select an option other than "Auto-update (recommended)" and click OK.

Hello! Life is small and everything is answering this question for you, you need to wait patiently for about three minutes, and the answer will be revealed for you immediately, please don't worry.

Disconnect the computer from the network and restart the computer, press the keyboard F8 several times in a row when the boot screen appears, and select [Safe Mode]; In safe mode, go to Control Center, select Windows Update, select Never check for updates, and uncheck Allow all computer users to install updates

I wish you a happy life Trouble dear give a thumbs up, thank you

After the computer turns on automatic update, it will update the system when it is turned on, and you can enter it after the system update is completed.

Right-click the window icon in the lower left corner, find "Run" in the pop-up menu, or use the keyboard shortcut "Windows+R" to open the running interface;

2.In the input box at Runtime, enter " Click OK.

3.In the pop-up menu, find "Windows Update" and double-click to enter.

4.Select "Disable" for the startup type and click Apply. Then click OK.

Summary. Reasons why the computer update and restart can't start: 1. This means that you have failed to upgrade, resulting in a system crash.

2. The function of using a pirated system and then patching with Microsoft software, or the stuck machine caused by system update. 3. It may be that the system files are missing. 4. The hard disk is not in good contact.

5. Hard disk MBR error.

The reason for the computer update smile cover change and restart the machine can't be turned on: 1. This means that you failed to upgrade, causing the system to crash. 2. The function of using a pirated system and then patching with Microsoft software, or the machine is stuck due to system updates.

3. It may be that the system files are missing. 4. The hard disk is not in good contact. 5. Hard disk MBR error.

You've done a great job! Can you elaborate on that?

The computer keeps updating and restarting and can't turn on the solution:1It can generally be solved by turning it back on after a few minutes of power failure.

2. If the power failure is useless, we can restore the last configuration of the computer to solve this problem, press F8 when turning on, enter the safe mode of the computer, and select "Last correct configuration", you can; (If you are not sure when to press F8, you can press the power button and keep pressing F8 until the interface shown in the figure appears). 3. Or press F8, you can't enter the interface in the picture above, then the most simple and crude solution is to reinstall the system after the car, find a system CD to reinstall it, if there is no system CD, the most thorough way to close the front is to restore the computer to factory settings. 4. There is also a situation that the hardware of the computer is loose or malfunctioning, we only need to reseat the memory module of the computer.

5. If the above methods solve the problem in countless ways, you can consider reinstalling the operating system.