How to upgrade the radio and television set top box in the village.

Satellite TV is available in every village.

Possible causes and solutions for suddenly not receiving a single station:

1. The plug of the signal cable connecting the set-top box is loose or has fallen off.

Solution: Reconnect the signal cable to restore the brightness signal.

2. The lid of the pot is shifted in the direction of the satellite or the high-frequency head is broken.

Solution: You need to adjust the position of the lid of the small pot accurately or replace the high-frequency head.

3. There is an obstacle in the direction of the satellite where the lid of the pot is aligned.

Solution: Remove the obstacle so that the direction of the lid is kept open, and there should be no obstruction.

4. The signal demodulator of the set-top box is broken.

Solution: Ask a professional master to replace the letter wheel wide number demodulator.

Hello! Let me answer this question for you The steps to search for TV programs on the digital set-top box are as follows: 1. Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings".

2. Enter the password "9999". 3. Select "Installation and Signal Detection" in the "System Settings" interface (selected by default), and press the "Confirm" button of the remote control twice. Stand on the back side of the satellite dish and let the front side of the satellite dish leak from the south direction to the satellite direction and rotate slowly (it is recommended that the speed of rotation is slower than the speed of the second hand of the watch).

In the process of rotation, you should always keep an eye on the change of "signal strength" and "signal quality" in the debugging interface of the satellite receiver on the TV, and stop the action when the signal turns green, indicating that the satellite has been preliminarily identified and the satellite signal has been locked. 4. Then, go to "Auto Search". 5、Wait for the search to end,Press the exit button,Retreat to the big screen of the TV。

Resources.

As long as the set-top box is turned on, a software upgrade flow is detected, and the software version, hardware version, serial number and other conditions are compared, and the set-top box can be restarted directly to enter the upgrade interface.

Turn it off and then turn it on, put back the original TV card of the receiver in the receiver you are locating, and wait.

Press F4 on the remote control, scan the base station, and go back!

waited for a long time until the TV show appeared on the screen. Then, observe if the problem is solved? At least **5 minutes, if the words "location information has changed, please contact the customer service center" will not appear in the upper right corner of the screen, it proves that the receiver can watch the program normally!

Hello, 1. Check whether the signal source line is not in good contact and there is no scattered broadband signal, such as the antenna signal input receiver, the connection line between the receiver and the TV, and ensure that the line is smooth and firm. 2. Secondly, check whether the direction of the satellite antenna has changed, and the satellite can be realigned on the roof. Just find an unobstructed flat place and fine-tune it should solve the problem.

Whether the angle is not adjusted well, or the signal on the room is blocked, it may not be aligned in the following ways can be unlocked: 1. You can unlock it after entering the password, and the password can be viewed The initial password of the manual (if it has not been changed). 2. Press the "Menu" on the remote control of the set-top box, enter the system settings, find the "Set Password" and have the option "Program Lock", and modify the program lock to not enabled.

The way to upgrade the set-top box of the village by manual search is to unplug the signal line of the set-top box first, and the TV will automatically search, but because there is no signal, the TV cannot search for any electric channel. After that, reconnect the signal cable,Enter the TV menu,Use the ** device to conduct manual search,After the search is completed, the set-top box Pi Tongzi upgrade is completed,Return to normal operation。 2. Restore factory settings and upgrade:

Restoring the factory settings of the set-top box is also a way to upgrade the set-top box. The steps of this method are: first enter the settings interface, return to the factory settings, and use the manual search method to search.

Channel 1 does not have any programs, and when you enter channel 2, you start to have programs and then add them in turn. The upgrade is successful. Both of these methods can be successfully upgraded to the set-top box.

Summary. Hello, I'm glad to answer for you 1. Find the set-top box remote control, and press and hold the information button of the set-top box remote control for three seconds. 2. At this time, the TV will appear "This operation will erase all the programs searched by the user and restore the default programs, OK", press the OK button on the remote control.

3. Press the menu button on the remote control, enter the menu and select to enter the program settings. 4. At this time, enter the automatic search mode, to see the automatic search mode, you can only see it by pressing the information key, do not turn off the set-top box and TV, if you turn off and then open the set-top box, you will not be able to see it again. 5. After entering the automatic search interface, press the OK button of the remote control of the set-top box again.

Hello dear, this question is being answered for you, typing takes time, please be patient! How to search for digital TV set-top boxes in the village.

Hello, I'm glad to answer for you 1. Find the set-top box remote control, and press and hold the information button of the set-top box remote control for three seconds. 2. At this time, the TV will appear "This operation will erase all the programs searched by the user and restore the default programs, are you sure?", press the OK button on the remote control. 3. Press the menu button on the remote control, enter the menu and select to enter the program settings.

4. At this time, enter the automatic search mode, to see the automatic search mode, you can only see it by pressing the information key, do not turn off the set-top box and TV, if you turn off and then turn on the top of the Xiangmo God box, you will not be able to see it again. 5. After entering the automatic search interface, press the OK button of the remote control of the set-top box again. 6. After the search process, it will probably take three minutes to return to the clock, and it will automatically exit after the search is completed, and the added TV stations will be ranked at the back of the program list.

For the problem of upgrading the user's account in the process of making the user's account pass, you can choose a mandatory upgrade or a non-mandatory upgrade according to the specific upgrade needs, and refer to the following steps to complete the upgrade.

Tools Raw materials: Household TV remote control.

1. When we turn on the TV and set-top box, the [new version available] upgrade prompt will pop up, at this time, use the corresponding remote control, select [Confirm] to complete**, you can upgrade immediately.

2. If there is no upgrade prompt interface, you can click the [Menu] button on the remote control to bring up the function options.

3. In the list on the left, find [Set up the mountain in the system] and click [Confirm] to enter.

4. Enter the four-digit password 9999 or 0000, [confirm].

5. Then, the system will automatically detect whether there are upgradeable files, follow the above steps 1 and 2 to start the upgrade, and will automatically restart after completion, and you can use it normally.