There is a crack in the sewer pipe, how to fix it

The sewer pipe is cracked, and the repair is as follows:

1. First of all, the tap water valve should be closed, and it is best to temporarily cut off the power supply, and then observe the water leakage point to check the specific situation of the crack.

2. You need to observe the severity of the rupture, if there are only some cracks overflowing, then use the glue to repair the rupture of the plastic pipe to stick it. Be careful, don't use random glue, be sure to use a professional glue that won't pollute the water.

3. If the crack is large and cannot be glued with glue, then you can go to the hardware store to buy a section of joints that can cover both ends, reduce the water leakage, and stick it with glue.

4. If the whole section has been cracked, then it can not be glued with glue, and there is no need to carry out local treatment, at this time, you need to ask a professional master to repair. If you have strong hands-on ability, you can also find professional tools to repair it yourself.

If the crack is relatively large and there are certain holes, then it is necessary to take a small piece of other pipes of the same specification as this pipe (that is, a small piece with the same degree of curvature as the broken part of the pipe), and use the glue of the PVC pipe to wipe the crack and the small piece that is cut off and the surface of the crack and the crack, wipe dry, and then apply glue. Finally, stick it to the crack and fix it with a little force (or tie it up), and wait for 30 minutes to glue it. Whether it is iron or plastic pipes, when disposed of, they are coated with asphalt or viscose.

The surface must be dry, otherwise it will not be able to stick effectively.

1. Whether the water is dripping or gushing out, what should be done at this time is to close the valve of the water supply pipe immediately and report to the local property department.

2. Tie up the damaged part of the water pipe with special adhesive tape for repairing the water pipe.

3. In addition, you can also use glass fiber tape or ring gas resin adhesive to repair the cracks of the water pipe.

4. If the water pipe bursts seriously, you can wrap the ruptured part of the water pipe with a towel, which can not only prevent the water from spraying around, but also introduce the water flow into the placed bucket to avoid huge waste.

5. At the same time, it can also close the valve of the main water pipe in the household to completely intercept the tap water in the house**.

6. If the reason for the burst of the water pipe is that the pipe is too old, you should find a plumber for inspection and repair in time.

1. If the water pipe bursts, the water will overflow in large quantities, the water will be sprayed everywhere, and the non-waterproof items at home will suffer.

2. The burst of the water pipe is likely to be due to the fact that the pipe is too old or the quality of the original pipe does not meet the pressure requirements of the pipeline. Whether the water is dripping or gushing out, be calm and know the location of the valve of your home's water supply pipe at the first time.

The mainstream water supply pipe used in home decoration is PP-R pipe, and some manufacturers use PP-R pipes produced by first-class materials and waste materials, which often fail to meet the temperature and pressure resistance standards or have sand holes, which brings problems such as pipe bursting and leakage.

If the water pipe is cracked, you can choose G 688t glue, which has a very high effect, long duration, and is not easy to change due to the external environment.

G 688T is a one-component room temperature curing sealing and bonding glue, which can be combined with moisture in the air at room temperature to cause cross-linking, vulcanized into a high-performance elastomer, it is an excellent binder and sealant for metal and non-metal materials. The rubber material can be well bonded with metal, glass, ceramics and many other materials, and can play a role in bonding and sealing a variety of electronic components;

It will not pollute the surrounding environment of the use occasion. The cured colloid gives full play to the excellent electrical characteristics of silicone materials, and has the ability to resist tensile, vibration and impact in the temperature range of (60 220); It also has excellent weather resistance, heat resistance, cold resistance, and hydrophobicity.

Product use: It is used to fill the gap defects and sand holes of the 'nozzle' after the processing of molds and metal parts, repair the joint joints of ship maintenance and decoration ceilings, repair the cracks of the floor in a static state, the roof, the balcony, the pool, the sink, etc.;Repair of motor vehicle muffler perforations, cracks, fuel tanks, water tanks, pipelines, etc.; Metal, ceramic, enamel, hard plastic, wood and other same or different materials of bonding. This product is colloidal thick, strong viscosity, brittle, hard or soft, suitable for use in the temperature range below 200 degrees Celsius.

Specific uses: sealing and encapsulation applications in high temperatures; Seal filling in aviation; mobile kiln conveyor belts; industrial furnaces; flue grate exhaust pipe bag filter; Other bonding, sealing, filling, encapsulation, gluing, and other protective coatings for components that must work at high temperatures.

Water pipe rupture can be repaired with YH-101 repair glue.

The steps to repair the iron pipe leakage are as follows:

1. The first step needs to clean up the location of the water leakage and the location around the water leakage, and then proceed to the next step.

2. The second step is to start the winding project from the position of no water leakage, the line needs to be evenly presented in the process of winding, and the line is arranged neatly until it is wound to the position of the water leakage, and the position of the water leakage is fully covered.

3. The third step is to wait until the water leakage phenomenon is slowly reduced, and then use the engineering line to continue winding according to the original way of returning, so that the water leakage can be well controlled.

4. The fourth step is to wait for the water to leak completely, and then fix the end of the winding engineering line, and try to fix it firmly.

Other ways to repair water leakage in hot iron pipes

If there is still water leakage through the above methods, then it is best to replace the new molten iron pipe, and you need to buy the same size as the original molten iron pipe, which needs to be replaced by welding, and it is best to find a professional master to help.

Precautions for using water pipes

1. If the home is using an iron water pipe, then in the process of use, you need to wipe the water on the surface of the water pipe, otherwise it is easy to rust after a long time, and it will also affect the service life of the water pipe.

2. You can choose the right water pipe according to the actual situation of the home, there are many types of water pipes, so in order to be able to use water healthily, you need to choose a relatively healthy, safe and durable water pipe.

After the sewer pipe bursts, you must first close the water valve and then cut off the power supply, and then check the leakage, if there are only some cracks and overflow, then it is no problem to stick it with the glue that repairs the cracked plastic pipe.

1. After the sewer pipe bursts, be sure to close the tap water valve first to avoid wasting water. The next step is to temporarily cut off the power supply, and after cutting off the power supply, we will look for the leakage point to check the specific situation of the crack. 2. Check the whole pipeline to see if its rupture is very serious, if there are only some cracks overflowing.

Then use the glue to repair the broken plastic pipe to stick it, if the pipe is very serious, then you must find a professional person to repair it. 3. In the case of a large pipeline rupture, it can no longer be glued with glue, you can buy a joint today, cut off the leakage, and then use glue to connect the joint, so that a valve is formed. Then you can get through the water.

4. If the pipes are cracked, then the glue will not work, it will not work to find a professional to repair it, and it will not work to buy the interface from a hardware store, and you can use local treatment. The maintenance of the pipeline also depends on what material the pipeline is, and what material the pipeline is after the burst, buy glue in time, and seal the mouth of the pipeline burst. Then take the next step to see if it's serious enough to call a professional to repair it.