-
Anonymous users2024-02-07The 365 stainless steel weld cleaning agent of Shenzhen passivation technology does not use any equipment, is environmentally friendly, and can be done with a plastic frame.
-
Anonymous users2024-02-06Stainless steel cleaning uses solvents and emulsions to clean the surface of the steel to remove oil, grease, dust, lubricants and similar organic matter, but it cannot remove the rust and oxidation of the steel surface The required anchor depth is achieved.
Stainless steel pickling judgment, generally with chemical and electrolytic two methods for pickling treatment, pipeline anti-corrosion only stool punching with chemical pickling, can remove oxide scale, rust, old coating, sometimes can be used as sandblasting after rust reprocessing. Although chemical cleaning can make the surface reach a certain degree of cleanliness and roughness, its anchor lines are shallow, and jujube search is easy to pollute the environment.
Stainless steel jet rust removal is to drive the high-speed rotation of the jet blades through a high-power motor, so that steel grit, steel shots, iron wire segments, inorganic salts and other abrasives are sprayed on the surface of 304 stainless steel under the action of centrifugal force, which can not only completely remove rust, oxides and dirt, but also 304 stainless steel can achieve the required uniform roughness under the action of abrasive violent impact and friction.
-
Anonymous users2024-02-05Stainless steel cleaning, the use of Fontan solvent, emulsion to clean the surface of the steel, in order to remove oil, grease, dust, lubricants and similar organic matter, but it can not remove the rust on the surface of the steel, oxidation required anchor depth depth.
Stainless steel pickling, generally with chemical and electrolytic two methods for pickling treatment, pipeline anti-corrosion only use chemical pickling, can remove oxide scale, rust, old coating, sometimes can be used as sandblasting after rust reprocessing. Although chemical cleaning of jujube can make the surface achieve a certain degree of cleanliness and roughness, its anchor lines are shallow, and it is easy to pollute the environment.
Stainless steel jet rust removal is a high-speed rotation of the jet blades driven by a high-power motor, so that steel grit, steel shots, iron wire segments, inorganic salts and other abrasives are sprayed on the surface of 304 stainless steel under the action of centrifugal force, which can not only completely remove rust, oxide and dirt, but also 304 stainless steel can achieve the required uniform roughness under the action of violent impact and friction of the abrasive.
-
Anonymous users2024-02-041. The best tool for cleaning stainless steel is a rag and stainless steel oil, after the first step is completed, pour the stainless steel oil on the rag (note: stainless steel oil can not be used too much, otherwise it will leave traces), and then wipe back and forth on the stainless steel items until all the stains are removed.
2. After this step is completed, you can take a clean rag, and then continue to wipe back and forth on the stainless steel items (note: no more stainless steel oil) until the stainless steel oil is wiped clean and the stainless steel items become brighter, which basically completes the entire cleaning work.
3. For anything in the cleaning will first remove most of its stains, the common methods are rinsing or wiping, stainless steel is to choose the method of wiping to wipe off most of the dust on the surface of stainless steel, so that the overall stainless steel looks relatively clean.
4. The protection of stainless steel actually refers to their daily hygiene, simply put, it is necessary to do a good job in the cleaning of stainless steel, most people will think that the cleaning of stainless steel is very simple, but carefully observe the cleaning of stainless steel objects and the actual difference between them when they were bought, these are caused by not being cleaned.
-
Anonymous users2024-02-03If your workpiece is relatively small, you can choose stainless steel pickling passivation solution by immersion. If your workpiece is larger, you can choose to apply our stainless steel pickling passivation paste to remove the weld spot at the weld bead.
How to use:1It is recommended to wear rubber gloves and other protective equipment during operation.
2.First, use a plastic rod or stainless steel rod to stir the pickling passivation paste evenly. Then apply a coating with a thickness of 2-3 mm on the surface of stainless steel.
3.Reaction time is guaranteed (about 15-30 minutes). Note:
The time and temperature are proportional to the pickling effect, and the construction time below 0 is appropriately extended). After the surface oxide scale, rust and weld spots are completely removed, rinse with clean water (lime water or alkaline water is better to neutralize the reaction).
4.If there is oil on the surface of stainless steel, the oil should be cleaned first.
-
Anonymous users2024-02-021. Use ultrasonic cleaning machine (preferred), suitable for large-output product cleaning in three steps:
1) Put the weldment into the ultrasonic sink 1 filled with clean water for initial washing;
2) Put the weldment into the ultrasonic sink 2 filled with clean water and clean it for the second time;
3) Put the weldment into the ultrasonic sink 3 filled with clean water and carry out the final cleaning.
Put the cleaned weldments into the oven to dry, and the cleaning process is completed.
Note: After washing for a period of time, replace it with clean water.
2. Soaking + rinsing: suitable for cleaning products with small output.
1) Put the weldment into a sink filled with clean water and soak for 1 minute, if the solder joint is large or the weld is long, the soaking time can be appropriately extended.
2) Then rinse the weld with running water, and at the same time brush the rinse with a brush.
Put the cleaned weldment into the oven to dry, or use a hair dryer to dry the weldment, and the cleaning process is completed.
-
Anonymous users2024-02-01Stainless steel cleaner masterbatch.
1. Powder formula: stainless steel cleaning agent masterbatch + yuan bright powder + soda ash + sodium silicate = stainless steel cleaning powder.
2. Water agent formula: stainless steel cleaning agent masterbatch + water + preservative + flavor + pigment = stainless steel cleaning agent.
Stainless steel cleaning agent masterbatch, is the latest research and development of Chengdu Hengfeng Hongye detergent factory for the production of stainless steel cleaning agent core masterbatch, has the following characteristics:
1. Particularly excellent performance.
1. It can quickly remove various old stains such as yellow spots, rust spots, scale, oxidation spots and so on.
2. It can quickly remove all kinds of industrial grease on stainless steel.
3. It can quickly remove all kinds of industrial dirt on stainless steel.
4. It can quickly emulsify various industrial and edible oils.
2. Broad applicability.
1. It is widely used for cleaning and emulsifying all kinds of stainless steel yellow spots, rust spots, scale, oxidation spots and other old spots, industrial greases, dirts and oils.
2. It is widely used for cleaning and emulsifying all kinds of edible oils, dirt and oils.
Third, the production formula.
1. Powder formula: stainless steel cleaning agent masterbatch + yuan bright powder + soda ash + sodium silicate = stainless steel cleaning powder.
2), 10% of Yuan Ming powder
3), soda ash 60%.
4), sodium silicate 20%.
2. Water agent formula: stainless steel cleaning agent masterbatch + water + preservative + flavor + pigment = stainless steel cleaning agent.
2) Water 90%.
3) Appropriate amount of preservatives.
4) Appropriate amount of flavor.
5) Appropriate amount of pigment.
Fourth, the production process.
1. Powder formula production process: Stainless steel cleaning powder is mixed and stirred evenly by mixing and stirring stainless steel cleaning agent masterbatch, yuanming powder, soda ash and sodium silicate in proportion.
2. The production process of water agent formula: the stainless steel cleaning agent masterbatch + water + preservative + flavor + pigment is mixed and stirred evenly in proportion to the stainless steel cleaning agent.
-
Anonymous users2024-01-31I have a water-based cleaner imported from the United States that can effectively clean stainless steel flux, you can contact me if you need it.
-
Anonymous users2024-01-30Soak the alcohol for a few hours and wipe it off with a cloth.
-
Anonymous users2024-01-29It can also be washed with clean water, and it can be washed after welding.
There are two methods, one is to use passivation paste, which is specially used to clean short stainless steel welds, which only need to be applied to the weld for 20 minutes and wiped off; The other is for more welds, first put the workpiece into the mixture of nitric acid and hydrofluoric acid to soak and clean for 15 minutes, take it out and rinse it with water, and then put it into nitric acid to passivate for 20 minutes, take it out and rinse it clean.
1. The name is different, one is called 304D stainless steel, and the other is called 304J stainless steel. >>>More
Differences: 1. Different degrees of corrosion resistance: 316 stainless steel contains MO, which has better corrosion resistance than 304 stainless steel in a high-temperature environment, so in a high-temperature environment, engineers generally choose 316 material parts. >>>More
The differences between food grade 304 stainless steel and stainless steel are as follows: >>>More
The kitchen is clean every day, you can use cleaning wipes, and you can throw it away when you use one, you don't need to clean it, and it's convenient for lazy people. Second, the kitchen is a heavy oil area, which is a daily stir-frying, which will cause some oil stains on the countertop, wall, stove, and range hood. It is very convenient to wipe down the countertop, wipe down the range hood, and treat all the oil stains with one wipe. >>>More